Yes flexibility. I bought a pack of various resistors today at Radio Shack to make a switchable array. Thanks.
Rich Blake ---------- Original Message ---------------------------------- From: "Oleg M. Smirnov" <[email protected]> Date: Sat, 26 Oct 2002 01:42:45 +0000 >> >> >>> used is pretty crappy and adjusted itself after 10 >>>minutes of smashing the >>>throttle. I am going to install a fixed resistor at >>>1100 ohms unless >>>someone can give me reasons to go higher than that. >>> >>> >With 1100 ohms I was seeing only .6V on the a/f meter at WOT. Too lean. >I think I've got it set to 2 or 2.5K now. > >I would never go with a fixed resistor, as a matter of principle. I want >to have the flexibility. If you can't find a heavy-duty pot to withstand >the vibrations, use Dan's design (I posted a link a few messages back), >the one with four different resistors wired via a DIP switch. Then at >least you can select between 16 known, fixed values. > >Cheers, >Oleg > > ________________________________________________________________ Sent via the WebMail system at webmail.pioneernet.net
