I'm the one who had the two month odyssey with those symptoms that eventually turned out to be a combination of bad O2 sensor and poorly set DPR value. So after replacing your O2, you might have to reset the DPR pressure.
On Tue, 2002-12-17 at 07:47, Fli GLi wrote: > I had the same exact symptoms on my 2.0L 16V and a new O2 solved the > problem. I did not splice in a generic one, I bit the bullet and bought the > OE one. > > HTH, > > Renard > > -----Original Message----- > From: [email protected] > [mailto:[email protected]]On Behalf Of > [email protected] > Sent: Tuesday, December 17, 2002 12:13 AM > To: [email protected] > Subject: [a2-16v-list] car won't idle unless dpr is unplugged > > > I know others have had this problem. I just can't remember what the fix > was. > The car barely idles and barely revs up. If I disconnect the plug to the > dpr, it runs smooth, but not with 100% power. I suspect the temperature > sensor. Thoughts? > > Alex Ranarivelo > (818) 486-9973 > [email protected] > _______________________________________________ > a2-16v-list mailing list > [email protected] > http://mail.a2-16v.com/mailman/listinfo/a2-16v-list > For list archives, see listinfo link above. > > _______________________________________________ > a2-16v-list mailing list > [email protected] > http://mail.a2-16v.com/mailman/listinfo/a2-16v-list > For list archives, see listinfo link above.
