Bentley wiring diagram indicates for the 87-89 GTI 16V US production,
0.3 bar sender blue/black
1.8 bar sender gray/white
oil temp sender green/black
It shows the high pressure sender installed in the oil filter flange hole on
the engine side.
It shows the oil temp sender installed in the oil filter flange hole on the
radiator side.
GBergthold
From: "Doug Curtis" <[email protected]>
To: "A2_16v (E-mail)" <[email protected]>
Subject: [a2-16v-list] Oil Pressure Switches
Date: Wed, 2 Jul 2003 04:41:59 -0400
I was wondering if someone could look something up in their Bentley? My
Bentley is for the years 85 and 86 and shows that the high oil pressure
switch (1.8 bar, brown sensor) is located in the top mounting hole of the
oil filter (and should be a Gray/White wire), and the bottom hole is for
the oil temperature sensor (Green/Black wire). It shows the other pressure
sensor on the side of the head (.3 bar, white sensor and a Blue/Black
wire).
Could someone verify if these are the correct locations and wire color for
an 89 16V? If they are, where in the side of the head does the low
pressure switch go?
Thanks
_______________________________________________
a2-16v-list mailing list
[email protected]
http://mail.a2-16v.com/mailman/listinfo/a2-16v-list
For list archives, see listinfo link above.
_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE*
http://join.msn.com/?page=features/virus
