You can check to see if the lines are blocked with a bit of compressed air. You don't have to pressurize the lines to verify if they can flow. Just do some testing on a piece of host you have laying around the garage. You can easily tell if a line is block vs flowing with minimal pressure.
On Thu, Sep 17, 2015 at 3:59 PM, Larry Velez <[email protected]> wrote: > What do you use to draw a vacuum? > > > > Also, Any tips on how to test if the mechanical fuel distributor is > working? > > > > Thanks. > > > > -Larry > > > > *From:* [email protected] [mailto:[email protected]] *On > Behalf Of *John Lag see > *Sent:* Tuesday, September 8, 2015 2:28 PM > *To:* [email protected] > *Subject:* Re: [mk2-16v] RE: Fuel System Adventures > > > > I would try to draw a vacuum, less chance of bursting the line. > > Sent from my iPhone > > > On Sep 8, 2015, at 9:56 AM, Larry Velez <[email protected]> wrote: > > I am starting to wonder if my fuel lines are clogged. Now that I have > removed the main pump assembly and drained the gas tank – any tips on how > to test if the fuel lines themselves are clogged? Run compressed air > through them maybe? > > > > -Larry > > 91 GTI 16V > > > > -- > You received this message because you are subscribed to the Google Groups > "MK2-16v" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/mk2-16v. > To view this discussion on the web visit > https://groups.google.com/d/msgid/mk2-16v/ff6bb61740904526ac48d07ebfba3bc1%40MBX082-E1-VA-2.EXCH082.SERVERPOD.NET > <https://groups.google.com/d/msgid/mk2-16v/ff6bb61740904526ac48d07ebfba3bc1%40MBX082-E1-VA-2.EXCH082.SERVERPOD.NET?utm_medium=email&utm_source=footer> > . > > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "MK2-16v" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/mk2-16v. To view this discussion on the web visit https://groups.google.com/d/msgid/mk2-16v/CA%2BV5SC_hzBzd-4hwmEh48GeNO0wSPhJiqLGxth7z-WrmjmwU%2Bw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
