Hi
In the polygons file, I would suggest to change these lines:
- (building=* | amenity=*) & area!=no [0x13 resolution 24]
- tourism=* & area!=no & waterway!=* [0x13 resolution 24]
+ (building=* | amenity=*) & area!=no & amenity!=grave_yard [0x13 resolution
24]
+ tourism=* & area!=no & waterway!=* [0x1f resolution 24]
OK I can do that.
These should be added to the polygon style file:
man_made=* & area!=no
& (man_made!=door & man_made!=embankment & man_made!=breakwater
& man_made!=cable_line & man_made!=cutline & man_made!=cutting
& man_made!=levee & man_made!=trench
& man_made!=groyne & man_made!=reinforced_slope)
[0x13 resolution 24]
There is already a section that looks like this, should it be
replaced with the above?
man_made=* & area!=no
& (man_made!=door & man_made!=embankment & man_made!=breakwater
& man_made!=cable_line & man_made!=cutline & man_made!=cutting
& man_made!=levee & man_made!=trench)
[0x13 resolution 24]
man_made=* & area=yes
[0x13 resolution 24]
..Steve
_______________________________________________
mkgmap-dev mailing list
[email protected]
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
