Am Sonntag, 15. März 2015, 06:10:15 schrieb GerdP:
Hi Gerd
I don't think that there is a negative influence, but it can improve the
troughput a little bit.
I have shortened the file a little bit more and merge the test of highway=* to
the last lines
output with maxspeed=* & maxspeedkmh() =* { echo ' ${mkgmap:road-speed-max}'}
329442750: 0
329651261: 2
330025588: null
330025588: null
330025588: null
330149281: 3
330183871: 4
Can you test the attached file, please?
Bernd
> I agree that we can remove the extra lines to delete maxspeed.
> I still see no reason to bother about railways.
> Do you think that it has an influence on the img output
> or do you tink that you improve throughput with this extra rule?
--
amarok2 now playing:
#
# Sets the road speed based on the maxspeed tag.
# In case mkgmap:road-speed-class is set the element
# road_speed is overriden.
#
# road_speed classification:
# road_speed | highest speed
# 7 | No speed limit
# 6 | 70 mph / 110 km/h
# 5 | 60 mph / 90 km/h
# 4 | 50 mph / 80 km/h
# 3 | 35 mph / 60 km/h
# 2 | 25 mph / 40 km/h
# 1 | 15 mph / 20 km/h
# 0 | 3 mph / 5 km/h
#
maxspeed=walk { set maxspeed=10 }
maxspeed~'.*:living_street' { set maxspeed=10 }
maxspeed=RU:urban { set maxspeed=60 }
maxspeed=UA:urban { set maxspeed=60 }
maxspeed~'.*:urban' { set maxspeed=50 }
maxspeed=AT:rural { set maxspeed=100 }
maxspeed=DE:rural { set maxspeed=100 }
maxspeed~'.*:rural' { set maxspeed=90 }
maxspeed~'.*:trunk' { set maxspeed=100 }
maxspeed~'.*:motorway' { set maxspeed=130 }
maxspeed=* & maxspeedkmh()!=* { delete maxspeed }
highway=* & maxspeedkmh() <= 120 { set mkgmap:road-speed-max = 6 }
highway=* & maxspeedkmh() <= 100 { set mkgmap:road-speed-max = 5 }
highway=* & maxspeedkmh() <= 80 { set mkgmap:road-speed-max = 4 }
highway=* & maxspeedkmh() <= 60 { set mkgmap:road-speed-max = 3 }
highway=* & maxspeedkmh() <= 40 { set mkgmap:road-speed-max = 2 }
highway=* & maxspeedkmh() <= 20 { set mkgmap:road-speed-max = 1 }
highway=* & maxspeedkmh() <= 10 { set mkgmap:road-speed-max = 0 }
# please remove this line after tests
maxspeed=* & maxspeedkmh() =* { echo ' ${mkgmap:road-speed-max}'}
_______________________________________________
mkgmap-dev mailing list
[email protected]
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
