The patch titled
spi: freescale iMX SPI controller driver (v5)
has been removed from the -mm tree. Its filename was
spi-freescale-imx-spi-controller-driver-v5.patch
This patch was dropped because it was folded into
spi-freescale-imx-spi-controller-driver-bis.patch
------------------------------------------------------
Subject: spi: freescale iMX SPI controller driver (v5)
From: "Andrea Paterniani" <[EMAIL PROTECTED]>
- Dummy char for read-only transfer is now 0 (as suggested by D. Brownell).
- Solved a pio mode read only transfer bug.
- Added 2 new fields inside struct spi_imx_chip to manage bit clock wait
and /SS pulse between spi burst.
Signed-off-by: Andrea Paterniani <[EMAIL PROTECTED]>
Cc: David Brownell <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/spi/Kconfig | 12 +++---
drivers/spi/spi_imx.c | 53 ++++++++++++++++++++-------
include/asm-arm/arch-imx/spi_imx.h | 7 +--
3 files changed, 51 insertions(+), 21 deletions(-)
diff -puN drivers/spi/Kconfig~spi-freescale-imx-spi-controller-driver-v5
drivers/spi/Kconfig
--- a/drivers/spi/Kconfig~spi-freescale-imx-spi-controller-driver-v5
+++ a/drivers/spi/Kconfig
@@ -75,6 +75,13 @@ config SPI_BUTTERFLY
inexpensive battery powered microcontroller evaluation board.
This same cable can be used to flash new firmware.
+config SPI_IMX
+ tristate "Freescale iMX SPI controller"
+ depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
+ help
+ This enables using the Freescale iMX SPI controller in master
+ mode.
+
config SPI_MPC83xx
tristate "Freescale MPC83xx SPI controller"
depends on SPI_MASTER && PPC_83xx && EXPERIMENTAL
@@ -94,11 +101,6 @@ config SPI_OMAP_UWIRE
help
This hooks up to the MicroWire controller on OMAP1 chips.
-config SPI_IMX
- tristate "iMX SPI controller driver"
- depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
- help
- This is the iMX SPI controller driver.
config SPI_PXA2XX
tristate "PXA2xx SSP SPI master"
diff -puN drivers/spi/spi_imx.c~spi-freescale-imx-spi-controller-driver-v5
drivers/spi/spi_imx.c
--- a/drivers/spi/spi_imx.c~spi-freescale-imx-spi-controller-driver-v5
+++ a/drivers/spi/spi_imx.c
@@ -140,13 +140,14 @@
SPI_CONTROL_POL_ACT_HIGH | \
SPI_CONTROL_PHA_0 | \
SPI_CONTROL_SPIEN | \
- SPI_CONTROL_SSCTL_0 | \
+ SPI_CONTROL_SSCTL_1 | \
SPI_CONTROL_MODE_MASTER | \
SPI_CONTROL_DRCTL_0 | \
SPI_CONTROL_DATARATE_MIN \
)
#define SPI_DEFAULT_ENABLE_LOOPBACK (0)
#define SPI_DEFAULT_ENABLE_DMA (0)
+#define SPI_DEFAULT_PERIOD_WAIT (8)
/*-------------------------------------------------------------------------*/
@@ -254,6 +255,7 @@ struct driver_data {
/* Runtime state */
struct chip_data {
u32 control;
+ u32 period;
u32 test;
u8 enable_dma:1;
@@ -296,7 +298,7 @@ static void restore_state(struct driver_
chip->test,
chip->control);
writel(chip->test, regs + SPI_TEST);
- writel(0, regs + SPI_PERIOD);
+ writel(chip->period, regs + SPI_PERIOD);
writel(0, regs + SPI_INT_STATUS);
writel(chip->control, regs + SPI_CONTROL);
}
@@ -348,9 +350,9 @@ static int write(struct driver_data *drv
if (n > 0) {
/* Fill SPI TXFIFO */
if (drv_data->rd_only) {
+ tx += n * n_bytes;
while (n--)
writel(SPI_DUMMY_u16, regs + SPI_TXDATA);
- tx += n * n_bytes;
} else {
if (n_bytes == 1) {
while (n--) {
@@ -1203,20 +1205,43 @@ static int setup(struct spi_device *spi)
chip_info->enable_loopback =
SPI_DEFAULT_ENABLE_LOOPBACK;
chip_info->enable_dma = SPI_DEFAULT_ENABLE_DMA;
+ chip_info->ins_ss_pulse = 1;
+ chip_info->bclk_wait = SPI_DEFAULT_PERIOD_WAIT;
chip_info->cs_control = null_cs_control;
}
}
/* Now set controller state based on controller data */
- /* SPI loopback */
- if (chip_info->enable_loopback)
- chip->test = SPI_TEST_LBC;
- else
- chip->test = 0;
+ if (first_setup) {
+ /* SPI loopback */
+ if (chip_info->enable_loopback)
+ chip->test = SPI_TEST_LBC;
+ else
+ chip->test = 0;
- /* SPI dma driven */
- chip->enable_dma = chip_info->enable_dma;
+ /* SPI dma driven */
+ chip->enable_dma = chip_info->enable_dma;
+
+ /* SPI /SS pulse between spi burst */
+ if (chip_info->ins_ss_pulse)
+ u32_EDIT(chip->control,
+ SPI_CONTROL_SSCTL, SPI_CONTROL_SSCTL_1);
+ else
+ u32_EDIT(chip->control,
+ SPI_CONTROL_SSCTL, SPI_CONTROL_SSCTL_0);
+
+ /* SPI bclk waits between each bits_per_word spi burst */
+ if (chip_info->bclk_wait > SPI_PERIOD_MAX_WAIT) {
+ dev_err(&spi->dev,
+ "setup - "
+ "bclk_wait exceeds max allowed (%d)\n",
+ SPI_PERIOD_MAX_WAIT);
+ goto err_first_setup;
+ }
+ chip->period = SPI_PERIOD_CSRC_BCLK |
+ (chip_info->bclk_wait & SPI_PERIOD_WAIT);
+ }
/* SPI mode */
tmp = spi->mode;
@@ -1316,17 +1341,20 @@ static int setup(struct spi_device *spi)
"setup succeded\n"
" loopback enable = %s\n"
" dma enable = %s\n"
+ " insert /ss pulse = %s\n"
+ " period wait = %d\n"
" mode = %d\n"
" bits per word = %d\n"
" min speed = %d Hz\n"
" rounded max speed = %d Hz\n",
chip->test & SPI_TEST_LBC ? "Yes" : "No",
chip->enable_dma ? "Yes" : "No",
+ chip->control & SPI_CONTROL_SSCTL ? "Yes" : "No",
+ chip->period & SPI_PERIOD_WAIT,
spi->mode,
spi->bits_per_word,
spi_speed_hz(SPI_CONTROL_DATARATE_MIN),
spi->max_speed_hz);
- return status;
err_first_setup:
kfree(chip);
@@ -1416,7 +1444,8 @@ static int destroy_queue(struct driver_d
if (status != 0)
return status;
- destroy_workqueue(drv_data->workqueue);
+ if (drv_data->workqueue)
+ destroy_workqueue(drv_data->workqueue);
return 0;
}
diff -puN
include/asm-arm/arch-imx/spi_imx.h~spi-freescale-imx-spi-controller-driver-v5
include/asm-arm/arch-imx/spi_imx.h
---
a/include/asm-arm/arch-imx/spi_imx.h~spi-freescale-imx-spi-controller-driver-v5
+++ a/include/asm-arm/arch-imx/spi_imx.h
@@ -50,17 +50,16 @@ struct spi_imx_master {
* sections.
* @enable_dma : enables dma transfer (provided that controller driver has
* dma enabled too).
- * @mode : defines clock phase and polarity (SPI_MODE_0..SPI_MODE_3).
- * @bits_per_word : data transfer word size (1..16).
* @ins_ss_pulse : enable /SS pulse insertion between SPI burst.
- * @period_bclk : used to define wait time (number of bit clock) between data
- * transactions (0..32767).
+ * @bclk_wait : number of bclk waits between each bits_per_word SPI burst.
* @cs_control : function pointer to board-specific function to assert/deassert
* I/O port to control HW generation of devices chip-select.
*/
struct spi_imx_chip {
u8 enable_loopback:1;
u8 enable_dma:1;
+ u8 ins_ss_pulse:1;
+ u16 bclk_wait:15;
void (*cs_control)(u32 control);
};
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
spi-freescale-imx-spi-controller-driver-bis.patch
spi-freescale-imx-spi-controller-driver-v5.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
