The patch titled
     sata_nv: handle SError status indication
has been added to the -mm tree.  Its filename is
     sata_nv-handle-serror-status-indication.patch

*** Remember to use Documentation/SubmitChecklist when testing your code ***

See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this

------------------------------------------------------
Subject: sata_nv: handle SError status indication
From: Robert Hancock <[EMAIL PROTECTED]>

ADMA-capable controllers provide a bit in the status register that appears
to indicate that the controller detected an SError condition.  Update
sata_nv to detect this and trigger error handling in order to handle the
fault.

Signed-off-by: Robert Hancock <[EMAIL PROTECTED]>
Cc: Jeff Garzik <[EMAIL PROTECTED]>
Cc: Tejun Heo <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---

 drivers/ata/sata_nv.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff -puN drivers/ata/sata_nv.c~sata_nv-handle-serror-status-indication 
drivers/ata/sata_nv.c
--- a/drivers/ata/sata_nv.c~sata_nv-handle-serror-status-indication
+++ a/drivers/ata/sata_nv.c
@@ -827,7 +827,8 @@ static irqreturn_t nv_adma_interrupt(int
                        /* freeze if hotplugged or controller error */
                        if (unlikely(status & (NV_ADMA_STAT_HOTPLUG |
                                               NV_ADMA_STAT_HOTUNPLUG |
-                                              NV_ADMA_STAT_TIMEOUT))) {
+                                              NV_ADMA_STAT_TIMEOUT |
+                                              NV_ADMA_STAT_SERROR))) {
                                struct ata_eh_info *ehi = &ap->eh_info;
 
                                ata_ehi_clear_desc(ehi);
@@ -841,6 +842,9 @@ static irqreturn_t nv_adma_interrupt(int
                                } else if (status & NV_ADMA_STAT_HOTUNPLUG) {
                                        ata_ehi_hotplugged(ehi);
                                        ata_ehi_push_desc(ehi, ": hot unplug");
+                               } else if (status & NV_ADMA_STAT_SERROR) {
+                                       /* let libata analyze SError and figure 
out the cause */
+                                       ata_ehi_push_desc(ehi, ": SError");
                                }
                                ata_port_freeze(ap);
                                continue;
_

Patches currently in -mm which might be from [EMAIL PROTECTED] are

origin.patch
libata-warn-if-speed-limited-due-to-40-wire-cable.patch
sata_nv-add-back-some-verbosity-into-adma-error_handler.patch
sata_nv-add-back-some-verbosity-into-adma-error_handler-tidy.patch
sata_nv-handle-serror-status-indication.patch

-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to