The patch titled
pata_ali: remove all the crap again and switch to cable_detect method
has been removed from the -mm tree. Its filename was
pata_ali-remove-all-the-crap-again-and-switch-to.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: pata_ali: remove all the crap again and switch to cable_detect method
From: Alan Cox <[EMAIL PROTECTED]>
Signed-off-by: Alan Cox <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/ata/pata_ali.c | 68 +++++----------------------------------
1 file changed, 9 insertions(+), 59 deletions(-)
diff -puN
drivers/ata/pata_ali.c~pata_ali-remove-all-the-crap-again-and-switch-to
drivers/ata/pata_ali.c
--- a/drivers/ata/pata_ali.c~pata_ali-remove-all-the-crap-again-and-switch-to
+++ a/drivers/ata/pata_ali.c
@@ -34,7 +34,7 @@
#include <linux/dmi.h>
#define DRV_NAME "pata_ali"
-#define DRV_VERSION "0.7.3"
+#define DRV_VERSION "0.7.4"
/*
* Cable special cases
@@ -90,59 +90,6 @@ static int ali_c2_cable_detect(struct at
}
/**
- * ali_early_error_handler - reset for eary chip
- * @ap: ATA port
- *
- * Handle the reset callback for the later chips with cable detect
- */
-
-static int ali_c2_pre_reset(struct ata_port *ap)
-{
- ap->cbl = ali_c2_cable_detect(ap);
- return ata_std_prereset(ap);
-}
-
-static void ali_c2_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, ali_c2_pre_reset,
- ata_std_softreset, NULL,
- ata_std_postreset);
-}
-
-/**
- * ali_early_cable_detect - cable detection
- * @ap: ATA port
- *
- * Perform cable detection for older chipsets. This turns out to be
- * rather easy to implement
- */
-
-static int ali_early_cable_detect(struct ata_port *ap)
-{
- return ATA_CBL_PATA40;
-}
-
-/**
- * ali_early_probe_init - reset for early chip
- * @ap: ATA port
- *
- * Handle the reset callback for the early (pre cable detect) chips.
- */
-
-static int ali_early_pre_reset(struct ata_port *ap)
-{
- ap->cbl = ali_early_cable_detect(ap);
- return ata_std_prereset(ap);
-}
-
-static void ali_early_error_handler(struct ata_port *ap)
-{
- return ata_bmdma_drive_eh(ap, ali_early_pre_reset,
- ata_std_softreset, NULL,
- ata_std_postreset);
-}
-
-/**
* ali_20_filter - filter for earlier ALI DMA
* @ap: ALi ATA port
* @adev: attached device
@@ -314,7 +261,6 @@ static void ali_set_dmamode(struct ata_p
/**
* ali_lock_sectors - Keep older devices to 255 sector mode
- * @ap: ATA port
* @adev: Device
*
* Called during the bus probe for each device that is found. We use
@@ -366,8 +312,9 @@ static struct ata_port_operations ali_ea
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = ali_early_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
@@ -402,8 +349,9 @@ static struct ata_port_operations ali_20
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = ali_early_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -440,8 +388,9 @@ static struct ata_port_operations ali_c2
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = ali_c2_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ali_c2_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -477,8 +426,9 @@ static struct ata_port_operations ali_c5
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = ali_c2_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ali_c2_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
origin.patch
git-libata-all.patch
ata_generic-remove-all-the-crud-again-and-use-cable.patch
pata_cypress-re-remove-all-the-crap-and-switch-back-to.patch
libata-acpi-add-infrastructure-for-drivers-to-use.patch
libata-acpi-add-infrastructure-for-drivers-to-use-fix.patch
pata_acpi-restore-driver.patch
pata_acpi-restore-driver-fix.patch
libata-misc-minor-merge-fixups.patch
pata_hpt37x-further-small-fixes.patch
pata_hpt3x2n-add-hpt371n-support-and-other-bits.patch
pata_pdc2027x-bring-into-line-with-changes-add-the-mode.patch
pci_module_init-convertion-in-tmscsimc.patch
tty-clarify-documentation-of-write.patch
tty-i386-x86_64-arbitary-speed-support.patch
revoke-special-mmap-handling.patch
revoke-add-documentation.patch
revoke-wire-up-i386-system-calls.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
