The patch titled
Allow AER to build for CONFIG_ACPI = n
has been added to the -mm tree. Its filename is
allow-aer-to-build-for-config_acpi-=-n.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: Allow AER to build for CONFIG_ACPI = n
From: Michael Ellerman <[EMAIL PROTECTED]>
This patch allows the PCIE AER driver to build for CONFIG_ACPI = n. To do
this we move all the ACPI specific code into aerdrv_acpi.c, and only build
that for CONFIG_ACPI = y.
Built for x86_64 ACPI=y/n, and for powerpc (ACPI=n).
Acked-by: "Zhang, Yanmin" <[EMAIL PROTECTED]>
Cc: Greg KH <[EMAIL PROTECTED]>
Cc: Kristen Carlson Accardi <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/pci/pcie/aer/Kconfig | 2 -
drivers/pci/pcie/aer/Makefile | 3 +-
drivers/pci/pcie/aer/aerdrv.h | 12 +++++++---
drivers/pci/pcie/aer/aerdrv_acpi.c | 31 ++++++++++++++++-----------
drivers/pci/pcie/aer/aerdrv_core.c | 18 +--------------
5 files changed, 33 insertions(+), 33 deletions(-)
diff -puN drivers/pci/pcie/aer/Kconfig~allow-aer-to-build-for-config_acpi-=-n
drivers/pci/pcie/aer/Kconfig
--- a/drivers/pci/pcie/aer/Kconfig~allow-aer-to-build-for-config_acpi-=-n
+++ a/drivers/pci/pcie/aer/Kconfig
@@ -4,7 +4,7 @@
config PCIEAER
boolean "Root Port Advanced Error Reporting support"
- depends on PCIEPORTBUS && ACPI
+ depends on PCIEPORTBUS
default y
help
This enables PCI Express Root Port Advanced Error Reporting
diff -puN drivers/pci/pcie/aer/Makefile~allow-aer-to-build-for-config_acpi-=-n
drivers/pci/pcie/aer/Makefile
--- a/drivers/pci/pcie/aer/Makefile~allow-aer-to-build-for-config_acpi-=-n
+++ a/drivers/pci/pcie/aer/Makefile
@@ -4,5 +4,6 @@
obj-$(CONFIG_PCIEAER) += aerdriver.o
-aerdriver-objs := aerdrv_errprint.o aerdrv_core.o aerdrv.o aerdrv_acpi.o
+aerdriver-objs := aerdrv_errprint.o aerdrv_core.o aerdrv.o
+aerdriver-$(CONFIG_ACPI) += aerdrv_acpi.o
diff -puN drivers/pci/pcie/aer/aerdrv.h~allow-aer-to-build-for-config_acpi-=-n
drivers/pci/pcie/aer/aerdrv.h
--- a/drivers/pci/pcie/aer/aerdrv.h~allow-aer-to-build-for-config_acpi-=-n
+++ a/drivers/pci/pcie/aer/aerdrv.h
@@ -10,8 +10,6 @@
#include <linux/workqueue.h>
#include <linux/pcieport_if.h>
-#include <linux/acpi.h>
-#include <linux/pci-acpi.h>
#include <linux/aer.h>
#define AER_NONFATAL 0
@@ -119,6 +117,14 @@ extern void aer_delete_rootport(struct a
extern int aer_init(struct pcie_device *dev);
extern void aer_isr(struct work_struct *work);
extern void aer_print_error(struct pci_dev *dev, struct aer_err_info *info);
-extern acpi_status aer_osc_setup(struct pci_dev *dev);
+
+#ifdef CONFIG_ACPI
+extern int aer_osc_setup(struct pcie_device *pciedev);
+#else
+static inline int aer_osc_setup(struct pcie_device *pciedev)
+{
+ return 0;
+}
+#endif
#endif //_AERDRV_H_
diff -puN
drivers/pci/pcie/aer/aerdrv_acpi.c~allow-aer-to-build-for-config_acpi-=-n
drivers/pci/pcie/aer/aerdrv_acpi.c
--- a/drivers/pci/pcie/aer/aerdrv_acpi.c~allow-aer-to-build-for-config_acpi-=-n
+++ a/drivers/pci/pcie/aer/aerdrv_acpi.c
@@ -20,18 +20,18 @@
/**
* aer_osc_setup - run ACPI _OSC method
+ * @pciedev: pcie_device which AER is being enabled on
*
- * Return:
- * Zero if success. Nonzero for otherwise.
+ * @return: Zero on success. Nonzero otherwise.
*
* Invoked when PCIE bus loads AER service driver. To avoid conflict with
* BIOS AER support requires BIOS to yield AER control to OS native driver.
**/
-acpi_status aer_osc_setup(struct pci_dev *dev)
+int aer_osc_setup(struct pcie_device *pciedev)
{
acpi_status status = AE_NOT_FOUND;
- acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
- struct pci_dev *pdev = dev;
+ struct pci_dev *pdev = pciedev->port;
+ acpi_handle handle = DEVICE_ACPI_HANDLE(&pdev->dev);
struct pci_bus *parent;
while (!handle) {
@@ -49,13 +49,20 @@ acpi_status aer_osc_setup(struct pci_dev
pdev = parent->self;
}
- if (!handle)
- return status;
+ if (handle) {
+ pci_osc_support_set(OSC_EXT_PCI_CONFIG_SUPPORT);
+ status = pci_osc_control_set(handle,
+ OSC_PCI_EXPRESS_AER_CONTROL |
+ OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
+ }
- pci_osc_support_set(OSC_EXT_PCI_CONFIG_SUPPORT);
- status = pci_osc_control_set(handle, OSC_PCI_EXPRESS_AER_CONTROL |
- OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_DEBUG "AER service couldn't init device %s - %s\n",
+ pciedev->device.bus_id,
+ (status == AE_SUPPORT || status == AE_NOT_FOUND) ?
+ "no _OSC support" : "Run ACPI _OSC fails");
+ return -1;
+ }
- return status;
+ return 0;
}
-
diff -puN
drivers/pci/pcie/aer/aerdrv_core.c~allow-aer-to-build-for-config_acpi-=-n
drivers/pci/pcie/aer/aerdrv_core.c
--- a/drivers/pci/pcie/aer/aerdrv_core.c~allow-aer-to-build-for-config_acpi-=-n
+++ a/drivers/pci/pcie/aer/aerdrv_core.c
@@ -22,8 +22,6 @@
#include <linux/errno.h>
#include <linux/pm.h>
#include <linux/suspend.h>
-#include <linux/acpi.h>
-#include <linux/pci-acpi.h>
#include <linux/delay.h>
#include "aerdrv.h"
@@ -733,20 +731,8 @@ void aer_delete_rootport(struct aer_rpc
**/
int aer_init(struct pcie_device *dev)
{
- acpi_status status;
-
- /* Run _OSC Method */
- status = aer_osc_setup(dev->port);
-
- if (ACPI_FAILURE(status)) {
- printk(KERN_DEBUG "AER service couldn't init device %s - %s\n",
- dev->device.bus_id,
- (status == AE_SUPPORT || status == AE_NOT_FOUND) ?
- "no _OSC support" : "Run ACPI _OSC fails");
-
- if (!forceload)
- return -ENXIO;
- }
+ if (aer_osc_setup(dev) && !forceload)
+ return -ENXIO;
return AER_SUCCESS;
}
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
allow-aer-to-build-for-config_acpi-=-n.patch
msi-fix-the-ordering-of-msix-irqs.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
