The patch titled
i2c-iop3xx: switch to static adapter numbering
has been added to the -mm tree. Its filename is
i2c-iop3xx-switch-to-static-adapter-numbering.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: i2c-iop3xx: switch to static adapter numbering
From: Martin Michlmayr <[EMAIL PROTECTED]>
Update the IOP3xx I2C driver to use i2c_add_numbered_adapter(), so that
later patches can convert boards to using new-style drivers.
Signed-off-by: Martin Michlmayr <[EMAIL PROTECTED]>
Tested-by: Voipio Riku <[EMAIL PROTECTED]>
Cc: Dan J Williams <[EMAIL PROTECTED]>
Acked-by: Jean Delvare <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/i2c/busses/i2c-iop3xx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff -puN
drivers/i2c/busses/i2c-iop3xx.c~i2c-iop3xx-switch-to-static-adapter-numbering
drivers/i2c/busses/i2c-iop3xx.c
---
a/drivers/i2c/busses/i2c-iop3xx.c~i2c-iop3xx-switch-to-static-adapter-numbering
+++ a/drivers/i2c/busses/i2c-iop3xx.c
@@ -491,6 +491,7 @@ iop3xx_i2c_probe(struct platform_device
new_adapter->id = I2C_HW_IOP3XX;
new_adapter->owner = THIS_MODULE;
new_adapter->dev.parent = &pdev->dev;
+ new_adapter->nr = pdev->id;
/*
* Default values...should these come in from board code?
@@ -508,7 +509,7 @@ iop3xx_i2c_probe(struct platform_device
platform_set_drvdata(pdev, new_adapter);
new_adapter->algo_data = adapter_data;
- i2c_add_adapter(new_adapter);
+ i2c_add_numbered_adapter(new_adapter);
return 0;
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
i2c-iop3xx-switch-to-static-adapter-numbering.patch
update-zilog-timeout.patch
rtc-rs5c372-becomes-a-new-style-i2c-driver.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
