The patch titled
sundance: PHY address form 0, only for device ID 0x0200 (IP100A) (20070605)
has been added to the -mm tree. Its filename is
sundance-phy-address-form-0-only-for-device-id-0x0200.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: sundance: PHY address form 0, only for device ID 0x0200 (IP100A)
(20070605)
From: Jesse Huang <[EMAIL PROTECTED]>
Search PHY address form 0, only for device ID 0x0200 (IP100A). Other
device are from PHY address 1.
Signed-off-by: Jesse Huang <[EMAIL PROTECTED]>
Cc: Jeff Garzik <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/net/sundance.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff -puN
drivers/net/sundance.c~sundance-phy-address-form-0-only-for-device-id-0x0200
drivers/net/sundance.c
---
a/drivers/net/sundance.c~sundance-phy-address-form-0-only-for-device-id-0x0200
+++ a/drivers/net/sundance.c
@@ -562,7 +562,11 @@ static int __devinit sundance_probe1 (st
* It seems some phys doesn't deal well with address 0 being accessed
* first, so leave address zero to the end of the loop (32 & 31).
*/
- for (phy = 1; phy <= 32 && phy_idx < MII_CNT; phy++) {
+ if(sundance_pci_tbl[np->chip_id].device == 0x0200)
+ phy = 0;
+ else
+ phy = 1;
+ for (; phy <= 32 && phy_idx < MII_CNT; phy++) {
int phyx = phy & 0x1f;
int mii_status = mdio_read(dev, phyx, MII_BMSR);
if (mii_status != 0xffff && mii_status != 0x0000) {
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
sundance-phy-address-form-0-only-for-device-id-0x0200.patch
sundance-phy-address-form-0-only-for-device-id-0x0200-fix.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
