The patch titled
GEODE: reboot fixup for geode machines with CS5536 boards
has been added to the -mm tree. Its filename is
geode-reboot-fixup-for-geode-machines-with-cs5536-boards.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: GEODE: reboot fixup for geode machines with CS5536 boards
From: Andres Salomon <[EMAIL PROTECTED]>
Writing to MSR 0x51400017 forces a hard reset on CS5536-based machines,
this has the reboot fixup do just that if such a board is detected.
Acked-by: Jordan Crouse <[EMAIL PROTECTED]>
Signed-off-by: Andres Salomon <[EMAIL PROTECTED]>
Cc: Alan Cox <[EMAIL PROTECTED]>
Cc: Andi Kleen <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
arch/i386/Kconfig | 4 ++--
arch/i386/kernel/reboot_fixups.c | 13 +++++++++++++
2 files changed, 15 insertions(+), 2 deletions(-)
diff -puN
arch/i386/Kconfig~geode-reboot-fixup-for-geode-machines-with-cs5536-boards
arch/i386/Kconfig
--- a/arch/i386/Kconfig~geode-reboot-fixup-for-geode-machines-with-cs5536-boards
+++ a/arch/i386/Kconfig
@@ -451,8 +451,8 @@ config X86_REBOOTFIXUPS
this config is intended, is when reboot ends with a stalled/hung
system.
- Currently, the only fixup is for the Geode GX1/CS5530A/TROM2.1.
- combination.
+ Currently, the only fixup is for the Geode machines using
+ CS5530A and CS5536 chipsets.
Say Y if you want to enable the fixup. Currently, it's safe to
enable this option even if you don't need it.
diff -puN
arch/i386/kernel/reboot_fixups.c~geode-reboot-fixup-for-geode-machines-with-cs5536-boards
arch/i386/kernel/reboot_fixups.c
---
a/arch/i386/kernel/reboot_fixups.c~geode-reboot-fixup-for-geode-machines-with-cs5536-boards
+++ a/arch/i386/kernel/reboot_fixups.c
@@ -5,12 +5,14 @@
*
* List of supported fixups:
* geode-gx1/cs5530a - Jaya Kumar <[EMAIL PROTECTED]>
+ * geode-gx/lx/cs5536 - Andres Salomon <[EMAIL PROTECTED]>
*
*/
#include <asm/delay.h>
#include <linux/pci.h>
#include <asm/reboot_fixups.h>
+#include <asm/msr.h>
static void cs5530a_warm_reset(struct pci_dev *dev)
{
@@ -21,6 +23,16 @@ static void cs5530a_warm_reset(struct pc
return;
}
+static void cs5536_warm_reset(struct pci_dev *dev)
+{
+ /*
+ * 6.6.2.12 Soft Reset (DIVIL_SOFT_RESET)
+ * writing 1 to the LSB of this MSR causes a hard reset.
+ */
+ wrmsrl(0x51400017, 1ULL);
+ udelay(50); /* shouldn't get here but be safe and spin a while */
+}
+
struct device_fixup {
unsigned int vendor;
unsigned int device;
@@ -29,6 +41,7 @@ struct device_fixup {
static struct device_fixup fixups_table[] = {
{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
+{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset },
};
/*
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
geode-reboot-fixup-for-geode-machines-with-cs5536-boards.patch
geode-basic-infrastructure-support-for-amd-geode-class.patch
geode-basic-infrastructure-support-for-amd-geode-class-update.patch
geode-mfgpt-support-for-geode-class-machines.patch
geode-mfgpt-clock-event-device-support.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
