The patch titled
git-alsa-fixup
has been added to the -mm tree. Its filename is
git-alsa-fixup.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: git-alsa-fixup
From: Andrew Morton <[EMAIL PROTECTED]>
try to fix mainline vs git-alsa rejects
Cc: Jaroslav Kysela <[EMAIL PROTECTED]>
Cc: Takashi Iwai <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
sound/Makefile | 4
sound/pci/hda/patch_realtek.c | 513 --------------------------------
sound/soc/s3c24xx/Kconfig | 30 -
3 files changed, 547 deletions(-)
diff -puN sound/Makefile~git-alsa-fixup sound/Makefile
--- a/sound/Makefile~git-alsa-fixup
+++ a/sound/Makefile
@@ -5,12 +5,8 @@ obj-$(CONFIG_SOUND) += soundcore.o
obj-$(CONFIG_SOUND_PRIME) += sound_firmware.o
obj-$(CONFIG_SOUND_PRIME) += oss/
obj-$(CONFIG_DMASOUND) += oss/
-<<<<<<< HEAD/sound/Makefile
-obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/
sparc/ parisc/ pcmcia/ mips/ soc/
-=======
obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
sparc/ spi/ parisc/ pcmcia/ mips/ soc/
->>>>>>> /sound/Makefile
obj-$(CONFIG_SND_AOA) += aoa/
# This one must be compilable even if sound is configured out
diff -puN sound/pci/hda/patch_realtek.c~git-alsa-fixup
sound/pci/hda/patch_realtek.c
--- a/sound/pci/hda/patch_realtek.c~git-alsa-fixup
+++ a/sound/pci/hda/patch_realtek.c
@@ -8128,520 +8128,7 @@ static int patch_alc262(struct hda_codec
}
/*
-<<<<<<< HEAD/sound/pci/hda/patch_realtek.c
- * ALC268 channel source setting (2 channel)
-=======
- * ALC268 channel source setting (2 channel)
- */
-#define ALC268_DIGOUT_NID ALC880_DIGOUT_NID
-#define alc268_modes alc260_modes
-
-static hda_nid_t alc268_dac_nids[2] = {
- /* front, hp */
- 0x02, 0x03
-};
-
-static hda_nid_t alc268_adc_nids[2] = {
- /* ADC0-1 */
- 0x08, 0x07
-};
-
-static hda_nid_t alc268_adc_nids_alt[1] = {
- /* ADC0 */
- 0x08
-};
-
-static struct snd_kcontrol_new alc268_base_mixer[] = {
- /* output mixer control */
- HDA_CODEC_VOLUME("Front Playback Volume", 0x2, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x3, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
- { }
-};
-
-/*
- * generic initialization of ADC, input mixers and output mixers
- */
-static struct hda_verb alc268_base_init_verbs[] = {
- /* Unmute DAC0-1 and set vol = 0 */
- {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-
- /*
- * Set up output mixers (0x0c - 0x0e)
- */
- /* set vol=0 to output mixers */
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0e, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
- {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
- {0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
-
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x1d, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
-
- /* FIXME: use matrix-type input source selection */
- /* Mixer elements: 0x18, 19, 1a, 1c, 14, 15, 0b */
- /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
- /* Input mixer2 */
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
-
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
- { }
-};
-
-/*
- * generic initialization of ADC, input mixers and output mixers
- */
-static struct hda_verb alc268_volume_init_verbs[] = {
- /* set output DAC */
- {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
- {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
- {0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
-
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-
- /* set PCBEEP vol = 0 */
- {0x1d, AC_VERB_SET_AMP_GAIN_MUTE, (0xb000 | (0x00 << 8))},
-
- { }
-};
-
-#define alc268_mux_enum_info alc_mux_enum_info
-#define alc268_mux_enum_get alc_mux_enum_get
-
-static int alc268_mux_enum_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- struct alc_spec *spec = codec->spec;
- const struct hda_input_mux *imux = spec->input_mux;
- unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
- static hda_nid_t capture_mixers[3] = { 0x23, 0x24 };
- hda_nid_t nid = capture_mixers[adc_idx];
- unsigned int *cur_val = &spec->cur_mux[adc_idx];
- unsigned int i, idx;
-
- idx = ucontrol->value.enumerated.item[0];
- if (idx >= imux->num_items)
- idx = imux->num_items - 1;
- if (*cur_val == idx && !codec->in_resume)
- return 0;
- for (i = 0; i < imux->num_items; i++) {
- unsigned int v = (i == idx) ? 0x7000 : 0x7080;
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- v | (imux->items[i].index << 8));
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL,
- idx );
- }
- *cur_val = idx;
- return 1;
-}
-
-static struct snd_kcontrol_new alc268_capture_alt_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x23, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x23, 0x0, HDA_OUTPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- * FIXME: the controls appear in the "playback" view!
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 1,
- .info = alc268_mux_enum_info,
- .get = alc268_mux_enum_get,
- .put = alc268_mux_enum_put,
- },
- { } /* end */
-};
-
-static struct snd_kcontrol_new alc268_capture_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x23, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x23, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x24, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x24, 0x0, HDA_OUTPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- * FIXME: the controls appear in the "playback" view!
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc268_mux_enum_info,
- .get = alc268_mux_enum_get,
- .put = alc268_mux_enum_put,
- },
- { } /* end */
-};
-
-static struct hda_input_mux alc268_capture_source = {
- .num_items = 4,
- .items = {
- { "Mic", 0x0 },
- { "Front Mic", 0x1 },
- { "Line", 0x2 },
- { "CD", 0x3 },
- },
-};
-
-/* create input playback/capture controls for the given pin */
-static int alc268_new_analog_output(struct alc_spec *spec, hda_nid_t nid,
- const char *ctlname, int idx)
-{
- char name[32];
- int err;
-
- sprintf(name, "%s Playback Volume", ctlname);
- if (nid == 0x14) {
- err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
- HDA_COMPOSE_AMP_VAL(0x02, 3, idx,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- } else if (nid == 0x15) {
- err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
- HDA_COMPOSE_AMP_VAL(0x03, 3, idx,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- } else
- return -1;
- sprintf(name, "%s Playback Switch", ctlname);
- err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
- HDA_COMPOSE_AMP_VAL(nid, 3, idx, HDA_OUTPUT));
- if (err < 0)
- return err;
- return 0;
-}
-
-/* add playback controls from the parsed DAC table */
-static int alc268_auto_create_multi_out_ctls(struct alc_spec *spec,
- const struct auto_pin_cfg *cfg)
-{
- hda_nid_t nid;
- int err;
-
- spec->multiout.num_dacs = 2; /* only use one dac */
- spec->multiout.dac_nids = spec->private_dac_nids;
- spec->multiout.dac_nids[0] = 2;
- spec->multiout.dac_nids[1] = 3;
-
- nid = cfg->line_out_pins[0];
- if (nid)
- alc268_new_analog_output(spec, nid, "Front", 0);
-
- nid = cfg->speaker_pins[0];
- if (nid == 0x1d) {
- err = add_control(spec, ALC_CTL_WIDGET_VOL,
- "Speaker Playback Volume",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT));
- if (err < 0)
- return err;
- }
- nid = cfg->hp_pins[0];
- if (nid)
- alc268_new_analog_output(spec, nid, "Headphone", 0);
-
- nid = cfg->line_out_pins[1] | cfg->line_out_pins[2];
- if (nid == 0x16) {
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Mono Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_INPUT));
- if (err < 0)
- return err;
- }
- return 0;
-}
-
-/* create playback/capture controls for input pins */
-static int alc268_auto_create_analog_input_ctls(struct alc_spec *spec,
- const struct auto_pin_cfg *cfg)
-{
- struct hda_input_mux *imux = &spec->private_imux;
- int i, idx1;
-
- for (i = 0; i < AUTO_PIN_LAST; i++) {
- switch(cfg->input_pins[i]) {
- case 0x18:
- idx1 = 0; /* Mic 1 */
- break;
- case 0x19:
- idx1 = 1; /* Mic 2 */
- break;
- case 0x1a:
- idx1 = 2; /* Line In */
- break;
- case 0x1c:
- idx1 = 3; /* CD */
- break;
- default:
- continue;
- }
- imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
- imux->items[imux->num_items].index = idx1;
- imux->num_items++;
- }
- return 0;
-}
-
-static void alc268_auto_init_mono_speaker_out(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- hda_nid_t speaker_nid = spec->autocfg.speaker_pins[0];
- hda_nid_t hp_nid = spec->autocfg.hp_pins[0];
- hda_nid_t line_nid = spec->autocfg.line_out_pins[0];
- unsigned int dac_vol1, dac_vol2;
-
- if (speaker_nid) {
- snd_hda_codec_write(codec, speaker_nid, 0,
- AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
- snd_hda_codec_write(codec, 0x0f, 0,
- AC_VERB_SET_AMP_GAIN_MUTE,
- AMP_IN_UNMUTE(1));
- snd_hda_codec_write(codec, 0x10, 0,
- AC_VERB_SET_AMP_GAIN_MUTE,
- AMP_IN_UNMUTE(1));
- } else {
- snd_hda_codec_write(codec, 0x0f, 0,
- AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1));
- snd_hda_codec_write(codec, 0x10, 0,
- AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1));
- }
-
- dac_vol1 = dac_vol2 = 0xb000 | 0x40; /* set max volume */
- if (line_nid == 0x14)
- dac_vol2 = AMP_OUT_ZERO;
- else if (line_nid == 0x15)
- dac_vol1 = AMP_OUT_ZERO;
- if (hp_nid == 0x14)
- dac_vol2 = AMP_OUT_ZERO;
- else if (hp_nid == 0x15)
- dac_vol1 = AMP_OUT_ZERO;
- if (line_nid != 0x16 || hp_nid != 0x16 ||
- spec->autocfg.line_out_pins[1] != 0x16 ||
- spec->autocfg.line_out_pins[2] != 0x16)
- dac_vol1 = dac_vol2 = AMP_OUT_ZERO;
-
- snd_hda_codec_write(codec, 0x02, 0,
- AC_VERB_SET_AMP_GAIN_MUTE, dac_vol1);
- snd_hda_codec_write(codec, 0x03, 0,
- AC_VERB_SET_AMP_GAIN_MUTE, dac_vol2);
-}
-
-/* pcm configuration: identiacal with ALC880 */
-#define alc268_pcm_analog_playback alc880_pcm_analog_playback
-#define alc268_pcm_analog_capture alc880_pcm_analog_capture
-#define alc268_pcm_digital_playback alc880_pcm_digital_playback
-
-/*
- * BIOS auto configuration
- */
-static int alc268_parse_auto_config(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- int err;
- static hda_nid_t alc268_ignore[] = { 0 };
-
- err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
- alc268_ignore);
- if (err < 0)
- return err;
- if (!spec->autocfg.line_outs)
- return 0; /* can't find valid BIOS pin config */
-
- err = alc268_auto_create_multi_out_ctls(spec, &spec->autocfg);
- if (err < 0)
- return err;
- err = alc268_auto_create_analog_input_ctls(spec, &spec->autocfg);
- if (err < 0)
- return err;
-
- spec->multiout.max_channels = 2;
-
- /* digital only support output */
- if (spec->autocfg.dig_out_pin)
- spec->multiout.dig_out_nid = ALC268_DIGOUT_NID;
-
- if (spec->kctl_alloc)
- spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
-
- spec->init_verbs[spec->num_init_verbs++] = alc268_volume_init_verbs;
- spec->num_mux_defs = 1;
- spec->input_mux = &spec->private_imux;
-
- return 1;
-}
-
-#define alc268_auto_init_multi_out alc882_auto_init_multi_out
-#define alc268_auto_init_hp_out alc882_auto_init_hp_out
-#define alc268_auto_init_analog_input alc882_auto_init_analog_input
-
-/* init callback for auto-configuration model -- overriding the default init */
-static void alc268_auto_init(struct hda_codec *codec)
-{
- alc268_auto_init_multi_out(codec);
- alc268_auto_init_hp_out(codec);
- alc268_auto_init_mono_speaker_out(codec);
- alc268_auto_init_analog_input(codec);
-}
-
-/*
- * configuration and preset
- */
-static const char *alc268_models[ALC268_MODEL_LAST] = {
- [ALC268_3ST] = "3stack",
- [ALC268_AUTO] = "auto",
-};
-
-static struct snd_pci_quirk alc268_cfg_tbl[] = {
- SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST),
- {}
-};
-
-static struct alc_config_preset alc268_presets[] = {
- [ALC268_3ST] = {
- .mixers = { alc268_base_mixer, alc268_capture_alt_mixer },
- .init_verbs = { alc268_base_init_verbs },
- .num_dacs = ARRAY_SIZE(alc268_dac_nids),
- .dac_nids = alc268_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt),
- .adc_nids = alc268_adc_nids_alt,
- .hp_nid = 0x03,
- .dig_out_nid = ALC268_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc268_modes),
- .channel_mode = alc268_modes,
- .input_mux = &alc268_capture_source,
- },
-};
-
-static int patch_alc268(struct hda_codec *codec)
-{
- struct alc_spec *spec;
- int board_config;
- int err;
-
- spec = kcalloc(1, sizeof(*spec), GFP_KERNEL);
- if (spec == NULL)
- return -ENOMEM;
-
- codec->spec = spec;
-
- board_config = snd_hda_check_board_config(codec, ALC268_MODEL_LAST,
- alc268_models,
- alc268_cfg_tbl);
-
- if (board_config < 0 || board_config >= ALC268_MODEL_LAST) {
- printk(KERN_INFO "hda_codec: Unknown model for ALC268, "
- "trying auto-probe from BIOS...\n");
- board_config = ALC268_AUTO;
- }
-
- if (board_config == ALC268_AUTO) {
- /* automatic parse from the BIOS config */
- err = alc268_parse_auto_config(codec);
- if (err < 0) {
- alc_free(codec);
- return err;
- } else if (!err) {
- printk(KERN_INFO
- "hda_codec: Cannot set up configuration "
- "from BIOS. Using base mode...\n");
- board_config = ALC268_3ST;
- }
- }
-
- if (board_config != ALC268_AUTO)
- setup_preset(spec, &alc268_presets[board_config]);
-
- spec->stream_name_analog = "ALC268 Analog";
- spec->stream_analog_playback = &alc268_pcm_analog_playback;
- spec->stream_analog_capture = &alc268_pcm_analog_capture;
-
- spec->stream_name_digital = "ALC268 Digital";
- spec->stream_digital_playback = &alc268_pcm_digital_playback;
-
- if (board_config == ALC268_AUTO) {
- if (!spec->adc_nids && spec->input_mux) {
- /* check whether NID 0x07 is valid */
- unsigned int wcap = get_wcaps(codec, 0x07);
-
- /* get type */
- wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
- if (wcap != AC_WID_AUD_IN) {
- spec->adc_nids = alc268_adc_nids_alt;
- spec->num_adc_nids =
- ARRAY_SIZE(alc268_adc_nids_alt);
- spec->mixers[spec->num_mixers] =
- alc268_capture_alt_mixer;
- spec->num_mixers++;
- } else {
- spec->adc_nids = alc268_adc_nids;
- spec->num_adc_nids =
- ARRAY_SIZE(alc268_adc_nids);
- spec->mixers[spec->num_mixers] =
- alc268_capture_mixer;
- spec->num_mixers++;
- }
- }
- }
- codec->patch_ops = alc_patch_ops;
- if (board_config == ALC268_AUTO)
- spec->init_hook = alc268_auto_init;
-
- return 0;
-}
-
-/*
* ALC861 channel source setting (2/6 channel selection for 3-stack)
->>>>>>> /sound/pci/hda/patch_realtek.c
*/
#define ALC268_DIGOUT_NID ALC880_DIGOUT_NID
#define alc268_modes alc260_modes
diff -puN sound/soc/s3c24xx/Kconfig~git-alsa-fixup sound/soc/s3c24xx/Kconfig
--- a/sound/soc/s3c24xx/Kconfig~git-alsa-fixup
+++ a/sound/soc/s3c24xx/Kconfig
@@ -9,34 +9,6 @@ config SND_S3C24XX_SOC
config SND_S3C24XX_SOC_I2S
tristate
-<<<<<<< HEAD/sound/soc/s3c24xx/Kconfig
-
-config SND_S3C2443_SOC_AC97
- tristate
- select AC97_BUS
- select SND_AC97_CODEC
- select SND_SOC_AC97_BUS
-
-config SND_S3C24XX_SOC_NEO1973_WM8753
- tristate "SoC I2S Audio support for NEO1973 - WM8753"
- depends on SND_S3C24XX_SOC && MACH_GTA01
- select SND_S3C24XX_SOC_I2S
- select SND_SOC_WM8753
- help
- Say Y if you want to add support for SoC audio on smdk2440
- with the WM8753.
-
-config SND_S3C24XX_SOC_SMDK2443_WM9710
- tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
- depends on SND_S3C24XX_SOC && MACH_SMDK2443
- select SND_S3C2443_SOC_AC97
- select SND_SOC_AC97_CODEC
- help
- Say Y if you want to add support for SoC audio on smdk2443
- with the WM9710.
-
-
-=======
config SND_S3C2443_SOC_AC97
tristate
@@ -62,5 +34,3 @@ config SND_S3C24XX_SOC_SMDK2443_WM9710
Say Y if you want to add support for SoC audio on smdk2443
with the WM9710.
-
->>>>>>> /sound/soc/s3c24xx/Kconfig
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
x86_powernow_k8_acpi-must-depend-on-acpi.patch
slow-down-printk-during-boot.patch
slow-down-printk-during-boot-fix-2.patch
git-acpi.patch
acpi-add-reboot-mechanism-fix.patch
git-alsa.patch
working-3d-dri-intel-agpko-resume-for-i815-chip.patch
revert-gregkh-driver-block-device.patch
adbhid-produce-all-capslock-key-events-fix.patch
m68k-mac-make-mac_hid_mouse_emulate_buttons.patch
git-kvm.patch
libata-add-irq_flags-to-struct-pata_platform_info-fix.patch
git-mtd.patch
e1000new-build-fix.patch
e1000new-build-fix-2.patch
ip_auto_config-fix-fix.patch
serial-8250-handle-saving-the-clear-on-read-bits-from-the-lsr-fix.patch
add-blacklisting-capability-to-serial_pci-to-avoid-misdetection-fix.patch
revert-gregkh-pci-pci_bridge-device.patch
i386-add-support-for-picopower-irq-router.patch
try-parent-numa_node-at-first-before-using-default-v2-fix.patch
aacraid-rename-check_reset.patch
git-scsi-target-fixup.patch
git-unionfs.patch
x86_64-clean-up-apicid_to_node-declaration.patch
x86_64-dynticks-disable-hpet_id_legsup-hpets.patch
mmconfig-validate-against-acpi-motherboard-resources.patch
git-newsetup-fixup.patch
git-xfs.patch
git-xfs-fixup.patch
vmscan-give-referenced-active-and-unmapped-pages-a-second-trip-around-the-lru.patch
sparsemem-record-when-a-section-has-a-valid-mem_map-fix.patch
readahead-combine-file_ra_stateprev_index-prev_offset-into-prev_pos-fix.patch
readahead-combine-file_ra_stateprev_index-prev_offset-into-prev_pos-fix-2.patch
fs-introduce-write_begin-write_end-and-perform_write-aops.patch
bias-the-location-of-pages-freed-for-min_free_kbytes-in-the-same-max_order_nr_pages-blocks.patch
maps2-move-the-page-walker-code-to-lib.patch
maps2-add-proc-pid-pagemap-interface.patch
maps2-make-proc-pid-smaps-optional-under-config_embeddedpatch-fix.patch
slub-slab-validation-move-tracking-information-alloc-outside-of-melstuff.patch
hugetlbfs-read-support-fix.patch
security-convert-lsm-into-a-static-interface-fix.patch
file-capabilities-clear-caps-cleanup-fix.patch
capabilityh-remove-include-of-currenth.patch
cache-pipe-buf-page-address-for-non-highmem-arch.patch
force-erroneous-inclusions-of-compiler-h-files-to-be-errors-fix.patch
driver-for-the-atmel-on-chip-ssc-on-at32ap-and-at91-fix.patch
add-kernel-notifierc-fix.patch
fs-9p-convc-error-path-fix.patch
loop-use-unlocked_ioctl.patch
pcmcia-compactflash-driver-for-pa-semi-electra-boards.patch
writeback-fix-time-ordering-of-the-per-superblock-dirty-inode-lists.patch
writeback-fix-time-ordering-of-the-per-superblock-dirty-inode-lists-2.patch
writeback-fix-time-ordering-of-the-per-superblock-dirty-inode-lists-3.patch
writeback-fix-time-ordering-of-the-per-superblock-dirty-inode-lists-4.patch
writeback-fix-comment-use-helper-function.patch
writeback-fix-time-ordering-of-the-per-superblock-dirty-inode-lists-5.patch
writeback-fix-time-ordering-of-the-per-superblock-dirty-inode-lists-6.patch
writeback-fix-time-ordering-of-the-per-superblock-dirty-inode-lists-7.patch
revert-faster-ext2_clear_inode.patch
intel-iommu-pci-generic-helper-function.patch
intel-iommu-iova-allocation-and-management-routines.patch
intel-iommu-intel-iommu-driver.patch
intel-iommu-iommu-floppy-workaround.patch
revoke-wire-up-i386-system-calls.patch
revoke-vs-git-block.patch
add-containerstats-v3-fix.patch
pid-namespaces-dynamic-kmem-cache-allocator-for-pid-namespaces-fix.patch
pid-namespaces-define-is_global_init-and-is_container_init-fix.patch
fs-superc-use-list_for_each_entry-instead-of-list_for_each-fix.patch
reiser4.patch
git-block-vs-reiser4.patch
page-owner-tracking-leak-detector.patch
check_dirty_inode_list.patch
alloc_pages-debug.patch
w1-build-fix.patch
git-alsa-fixup.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
