The patch titled
SPI loopback mode definition
has been added to the -mm tree. Its filename is
spi-loopback-mode-definition.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: SPI loopback mode definition
From: Anton Vorontsov <[EMAIL PROTECTED]>
Loopback mode is supported by various controllers. This mode can be
useful for testing, especially in conjunction with spidev driver.
Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
include/linux/spi/spi.h | 1 +
1 file changed, 1 insertion(+)
diff -puN include/linux/spi/spi.h~spi-loopback-mode-definition
include/linux/spi/spi.h
--- a/include/linux/spi/spi.h~spi-loopback-mode-definition
+++ a/include/linux/spi/spi.h
@@ -77,6 +77,7 @@ struct spi_device {
#define SPI_CS_HIGH 0x04 /* chipselect active
high? */
#define SPI_LSB_FIRST 0x08 /* per-word
bits-on-wire */
#define SPI_3WIRE 0x10 /* SI/SO signals shared
*/
+#define SPI_LOOP 0x20 /* loopback mode */
u8 bits_per_word;
int irq;
void *controller_state;
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
spi_mpc83xx-turn-off-spi-unit-while-switching-mode.patch
spi_mpc83xx-get-rid-of-magic-numbers.patch
spi_mpc83xx-support-for-lsb-first-transfers.patch
spi_mpc83xx-fix-qelsb-mode-shifts.patch
spi-loopback-mode-definition.patch
spidev-supports-more-communications-modes.patch
spidev_test-utility.patch
spi_mpc83xx-support-loopback-mode.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
