The patch titled
nvidiafb: Add boot option to reverse i2c port assignment
has been added to the -mm tree. Its filename is
nvidiafb-add-boot-option-to-reverse-i2c-port-assignment.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: nvidiafb: Add boot option to reverse i2c port assignment
From: "Antonino A. Daplas" <[EMAIL PROTECTED]>
There are a few nvidia hardware where the i2c port assignments are reversed,
i.e., the 1st i2c port is assigned to the secondary display and the 2nd i2c
port to the primary display. In most cases, if only 1 display is attached, or
if only 1 flatpanel and 1 analog display is attached, the port reversal is of
no consequence. However if 2 flatpanels are attached, it can cause display
problems.
There is no sane way of determining if the hardware reversed the i2c port
assignment, so the simplest fix is to add a boot/module option, "reverse_i2c
to explicitly reverse the i2c port.
This also restores i2c ordering back to the pre-2.6.22 state.
Signed-off-by: Antonino Daplas <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/video/nvidia/nv_i2c.c | 8 ++++----
drivers/video/nvidia/nv_type.h | 1 +
drivers/video/nvidia/nvidia.c | 6 ++++++
3 files changed, 11 insertions(+), 4 deletions(-)
diff -puN
drivers/video/nvidia/nv_i2c.c~nvidiafb-add-boot-option-to-reverse-i2c-port-assignment
drivers/video/nvidia/nv_i2c.c
---
a/drivers/video/nvidia/nv_i2c.c~nvidiafb-add-boot-option-to-reverse-i2c-port-assignment
+++ a/drivers/video/nvidia/nv_i2c.c
@@ -125,11 +125,11 @@ void nvidia_create_i2c_busses(struct nvi
par->chan[1].par = par;
par->chan[2].par = par;
- par->chan[0].ddc_base = 0x36;
- nvidia_setup_i2c_bus(&par->chan[0], "nvidia #0", I2C_CLASS_HWMON);
+ par->chan[0].ddc_base = (par->reverse_i2c) ? 0x36 : 0x3e;
+ nvidia_setup_i2c_bus(&par->chan[0], "nvidia #0", 0);
- par->chan[1].ddc_base = 0x3e;
- nvidia_setup_i2c_bus(&par->chan[1], "nvidia #1", 0);
+ par->chan[1].ddc_base = (par->reverse_i2c) ? 0x3e : 0x36;
+ nvidia_setup_i2c_bus(&par->chan[1], "nvidia #1", I2C_CLASS_HWMON);
par->chan[2].ddc_base = 0x50;
nvidia_setup_i2c_bus(&par->chan[2], "nvidia #2", 0);
diff -puN
drivers/video/nvidia/nv_type.h~nvidiafb-add-boot-option-to-reverse-i2c-port-assignment
drivers/video/nvidia/nv_type.h
---
a/drivers/video/nvidia/nv_type.h~nvidiafb-add-boot-option-to-reverse-i2c-port-assignment
+++ a/drivers/video/nvidia/nv_type.h
@@ -135,6 +135,7 @@ struct nvidia_par {
int paneltweak;
int LVDS;
int pm_state;
+ int reverse_i2c;
u32 crtcSync_read;
u32 fpSyncs;
u32 dmaPut;
diff -puN
drivers/video/nvidia/nvidia.c~nvidiafb-add-boot-option-to-reverse-i2c-port-assignment
drivers/video/nvidia/nvidia.c
---
a/drivers/video/nvidia/nvidia.c~nvidiafb-add-boot-option-to-reverse-i2c-port-assignment
+++ a/drivers/video/nvidia/nvidia.c
@@ -79,6 +79,7 @@ static int noscale __devinitdata = 0;
static int paneltweak __devinitdata = 0;
static int vram __devinitdata = 0;
static int bpp __devinitdata = 8;
+static int reverse_i2c __devinitdata;
#ifdef CONFIG_MTRR
static int nomtrr __devinitdata = 0;
#endif
@@ -1305,6 +1306,7 @@ static int __devinit nvidiafb_probe(stru
par->CRTCnumber = forceCRTC;
par->FpScale = (!noscale);
par->paneltweak = paneltweak;
+ par->reverse_i2c = reverse_i2c;
/* enable IO and mem if not already done */
pci_read_config_word(pd, PCI_COMMAND, &cmd);
@@ -1486,6 +1488,8 @@ static int __devinit nvidiafb_setup(char
noaccel = 1;
} else if (!strncmp(this_opt, "noscale", 7)) {
noscale = 1;
+ } else if (!strncmp(this_opt, "reverse_i2c", 11)) {
+ reverse_i2c = 1;
} else if (!strncmp(this_opt, "paneltweak:", 11)) {
paneltweak = simple_strtoul(this_opt+11, NULL, 0);
} else if (!strncmp(this_opt, "vram:", 5)) {
@@ -1582,6 +1586,8 @@ MODULE_PARM_DESC(mode_option, "Specify i
module_param(bpp, int, 0);
MODULE_PARM_DESC(bpp, "pixel width in bits"
"(default=8)");
+module_param(reverse_i2c, int, 0);
+MODULE_PARM_DESC(reverse_i2c, "reverse port assignment of the i2c bus");
#ifdef CONFIG_MTRR
module_param(nomtrr, bool, 0);
MODULE_PARM_DESC(nomtrr, "Disables MTRR support (0 or 1=disabled) "
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
fbdev-export-fb_destroy_modelist.patch
connector-change-connectors-max-message-size.patch
uvesafb-add-connector-entries.patch
uvesafb-the-driver-core.patch
uvesafb-documentation.patch
pm3fb-copyarea-and-partial-imageblit-suppor.patch
skeletonfb-wrong-field-name-fix.patch
pm3fb-header-file-reduction.patch
pm3fb-imageblit-improved.patch
pm3fb-3-small-fixes.patch
pm3fb-improvements-and-cleanups.patch
pm3fb-mtrr-support-and-noaccel-option.patch
pm3fb-mtrr-support-and-noaccel-option-make-pm3fb_init-static-again.patch
pm2fb-mtrr-support-and-noaccel-option.patch
pm2fb-mtrr-support-and-noaccel-option-pm2fb-lowsyncs-section-mismatch-fix.patch
pm2fb-accelerated-imageblit.patch
pm2fb-source-code-improvements.patch
pm2fb-permedia-2v-initialization-fixes.patch
pm2fb-accelerated-24-bit-fillrect.patch
sm501fb-update-suspend-and-resume-code.patch
sm501fb-call-fb-suspend-function-during-suspend-and-resume.patch
sm501fb-ensure-panel-interface-is-not-tristated-when-setup.patch
mbxfb-improvements-and-new-features.patch
pxafb-add-support-for-other-palette-formats.patch
tridentfb-coding-style-improvement.patch
tdfxfb-coding-style-improvement.patch
tdfxfb-3-fixes.patch
tdfxfb-palette-fixes.patch
fbdev-fix-incorrect-timings-in-some-modedb-entries.patch
tdfxfb-code-improvements.patch
tdfxfb-hardware-cursor.patch
tdfxfb-mtrr-support.patch
tdfxfb-mtrr-support-fix.patch
pm2fb-checkpatch-fixes.patch
pm3fb-checkpatch-fixes.patch
fbdev-fb_create_modedb-non-static-int-first-=-1.patch
fbdev-fb_create_modedb-non-static-int-first-=-1-fix.patch
pm2fb-permedia-2v-hardware-cursor-support.patch
pm3fb-hardware-cursor-support.patch
s3c2410fb-code-cleanup.patch
s3c2410fb-remove-fb_info-pointer-from-s3c2410fb_info.patch
s3c2410fb-multi-display-support.patch
s3c2410fb-add-margin-fields-to-s3c2410fb_display.patch
s3c2410fb-use-new-margin-fields.patch
s3c2410fb-remove-lcdcon3-register-from-s3c2410fb_display.patch
s3c2410fb-add-vertical-margins-fields-to-s3c2410fb_display.patch
s3c2410fb-use-vertical-margins-values.patch
s3c2410fb-add-pulse-length-fields-to-s3c2410fb_display.patch
s3c2410fb-remove-lcdcon2-and-lcdcon3-register-fields.patch
s3c2410fb-fix-missing-registers-offset.patch
atyfb-atyfb-unshare-pseudo_palette.patch
fbcon-convert-struct-font_desc-to-use-iso-c-initializers.patch
fbcon-convert-struct-font_desc-to-use-iso-c-initializers-update.patch
vt-fix-warnings-in-selectionh.patch
fbdev-change-asm-uaccessh-to-linux-uaccessh.patch
s3c2410fb-source-code-improvements.patch
s3c2410fb-adds-pixclock-to-s3c2410fb_display.patch
s3c2410fb-removes-lcdcon1-register-value-from-s3c2410fb_display.patch
s3c2410fb-make-use-of-default_display-settings.patch
cirrusfb-checkpatchpl-cleanup.patch
cirrusfb-remove-typedefs.patch
cirrusfb-remove-fields-from-cirrusfb_info.patch
cirrusfb-code-improvements.patch
cirrusfb-code-improvement-2nd-part.patch
pm3fb-header-file-cleanup.patch
pm2fb-hardware-cursor-support-for-the-permedia2.patch
pm2fb-panning-and-hardware-cursor-fixes.patch
vfb-make-virtual-framebuffer-mmapable.patch
fbdev-find-mode-with-the-highest-safest-refresh-rate-in-fb_find_mode.patch
nvidiafb-add-boot-option-to-reverse-i2c-port-assignment.patch
fbdev-support-for-byte-reversed-framebuffer-formats.patch
ps3-fix-black-and-white-stripes.patch
ps3fb-fix-spurious-mode-change-failures.patch
fbdev-update-documentation-fb-00-index.patch
tdfxfb-replace-busy-waiting-with-cpu_relax.patch
pm2fb-replace-busy-waiting-with-cpu_relax.patch
pm3fb-replace-busy-waiting-with-cpu_relax.patch
tdfxfb-checkpatch-fixes.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
