The patch titled
     PCI-X/PCI-Express read control interfaces: use them in mthca
has been removed from the -mm tree.  Its filename was
     pci-x-pci-express-read-control-interfaces-mthca.patch

This patch was dropped because it was merged into mainline or a subsystem tree

------------------------------------------------------
Subject: PCI-X/PCI-Express read control interfaces: use them in mthca
From: "Peter Oruba" <[EMAIL PROTECTED]>

These driver changes incorporate the proposed PCI-X / PCI-Express read byte
count interface.  Reading and setting those valuse doesn't take place
"manually", instead wrapping functions are called to allow quirks for some
PCI bridges.

Signed-off by: Peter Oruba <[EMAIL PROTECTED]>
Based on work by Stephen Hemminger <[EMAIL PROTECTED]>
Cc: Roland Dreier <[EMAIL PROTECTED]>
Cc: Michael S. Tsirkin <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---

 drivers/infiniband/hw/mthca/mthca_main.c |   38 +++++----------------
 1 files changed, 10 insertions(+), 28 deletions(-)

diff -puN 
drivers/infiniband/hw/mthca/mthca_main.c~pci-x-pci-express-read-control-interfaces-mthca
 drivers/infiniband/hw/mthca/mthca_main.c
--- 
a/drivers/infiniband/hw/mthca/mthca_main.c~pci-x-pci-express-read-control-interfaces-mthca
+++ a/drivers/infiniband/hw/mthca/mthca_main.c
@@ -137,45 +137,27 @@ static const char mthca_version[] __devi
 
 static int mthca_tune_pci(struct mthca_dev *mdev)
 {
-       int cap;
-       u16 val;
-
        if (!tune_pci)
                return 0;
 
        /* First try to max out Read Byte Count */
-       cap = pci_find_capability(mdev->pdev, PCI_CAP_ID_PCIX);
-       if (cap) {
-               if (pci_read_config_word(mdev->pdev, cap + PCI_X_CMD, &val)) {
-                       mthca_err(mdev, "Couldn't read PCI-X command register, "
-                                 "aborting.\n");
-                       return -ENODEV;
-               }
-               val = (val & ~PCI_X_CMD_MAX_READ) | (3 << 2);
-               if (pci_write_config_word(mdev->pdev, cap + PCI_X_CMD, val)) {
-                       mthca_err(mdev, "Couldn't write PCI-X command register, 
"
-                                 "aborting.\n");
+       if (pci_find_capability(mdev->pdev, PCI_CAP_ID_PCIX)) {
+               if (pcix_set_mmrbc(mdev->pdev, pcix_get_max_mmrbc(mdev->pdev))) 
{
+                       mthca_err(mdev, "Couldn't set PCI-X max read count, "
+                               "aborting.\n");
                        return -ENODEV;
                }
        } else if (!(mdev->mthca_flags & MTHCA_FLAG_PCIE))
                mthca_info(mdev, "No PCI-X capability, not setting RBC.\n");
 
-       cap = pci_find_capability(mdev->pdev, PCI_CAP_ID_EXP);
-       if (cap) {
-               if (pci_read_config_word(mdev->pdev, cap + PCI_EXP_DEVCTL, 
&val)) {
-                       mthca_err(mdev, "Couldn't read PCI Express device 
control "
-                                 "register, aborting.\n");
-                       return -ENODEV;
-               }
-               val = (val & ~PCI_EXP_DEVCTL_READRQ) | (5 << 12);
-               if (pci_write_config_word(mdev->pdev, cap + PCI_EXP_DEVCTL, 
val)) {
-                       mthca_err(mdev, "Couldn't write PCI Express device 
control "
-                                 "register, aborting.\n");
+       if (pci_find_capability(mdev->pdev, PCI_CAP_ID_EXP)) {
+               if (pcie_set_readrq(mdev->pdev, 4096)) {
+                       mthca_err(mdev, "Couldn't write PCI Express read 
request, "
+                               "aborting.\n");
                        return -ENODEV;
                }
-       } else if (mdev->mthca_flags & MTHCA_FLAG_PCIE)
-               mthca_info(mdev, "No PCI Express capability, "
-                          "not setting Max Read Request Size.\n");
+       } else if (!(mdev->mthca_flags & MTHCA_FLAG_PCIE))
+               mthca_info(mdev, "No PCI-X capability, not setting RBC.\n");
 
        return 0;
 }
_

Patches currently in -mm which might be from [EMAIL PROTECTED] are

git-infiniband.patch
pci-x-pci-express-read-control-interfaces-e1000.patch

-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to