The patch titled
libata: add human-readable error value decoding
has been removed from the -mm tree. Its filename was
libata-add-human-readable-error-value-decoding-v3.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: libata: add human-readable error value decoding
From: Robert Hancock <[EMAIL PROTECTED]>
This adds human-readable decoding of the ATA status and error registers
(similar to what drivers/ide does) as well as the SATA Serror register to
libata error handling output. This prevents the need to pore through
standards documents to figure out the meaning of the bits in these
registers when looking at error reports. Some bits that drivers/ide
decoded are not decoded here, since the bits are either command-dependent
or obsolete, and properly parsing them would add too much complexity.
Signed-off-by: Robert Hancock <[EMAIL PROTECTED]>
Acked-by: Alan Cox <[EMAIL PROTECTED]>
Cc: Jeff Garzik <[EMAIL PROTECTED]>
Cc: Tejun Heo <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/ata/libata-eh.c | 45 ++++++++++++++++++++++++++++++++++++++
include/linux/ata.h | 9 +++++++
2 files changed, 54 insertions(+)
diff -puN
drivers/ata/libata-eh.c~libata-add-human-readable-error-value-decoding-v3
drivers/ata/libata-eh.c
--- a/drivers/ata/libata-eh.c~libata-add-human-readable-error-value-decoding-v3
+++ a/drivers/ata/libata-eh.c
@@ -1911,6 +1911,27 @@ static void ata_eh_link_report(struct at
ata_link_printk(link, KERN_ERR, "%s\n", desc);
}
+ if (ehc->i.serror)
+ ata_port_printk(ap, KERN_ERR,
+ "SError: {%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s}\n",
+ ehc->i.serror & SERR_DATA_RECOVERED ? "RecovData " : "",
+ ehc->i.serror & SERR_COMM_RECOVERED ? "RecovComm " : "",
+ ehc->i.serror & SERR_DATA ? "UnrecovData " : "",
+ ehc->i.serror & SERR_PERSISTENT ? "Persist " : "",
+ ehc->i.serror & SERR_PROTOCOL ? "Proto " : "",
+ ehc->i.serror & SERR_INTERNAL ? "HostInt " : "",
+ ehc->i.serror & SERR_PHYRDY_CHG ? "PHYRdyChg " : "",
+ ehc->i.serror & SERR_PHY_INT_ERR ? "PHYInt " : "",
+ ehc->i.serror & SERR_COMM_WAKE ? "CommWake " : "",
+ ehc->i.serror & SERR_10B_8B_ERR ? "10B8B " : "",
+ ehc->i.serror & SERR_DISPARITY ? "Dispar " : "",
+ ehc->i.serror & SERR_CRC ? "BadCRC " : "",
+ ehc->i.serror & SERR_HANDSHAKE ? "Handshk " : "",
+ ehc->i.serror & SERR_LINK_SEQ_ERR ? "LinkSeq " : "",
+ ehc->i.serror & SERR_TRANS_ST_ERROR ? "TrStaTrns " : "",
+ ehc->i.serror & SERR_UNRECOG_FIS ? "UnrecFIS " : "",
+ ehc->i.serror & SERR_DEV_XCHG ? "DevExch " : "" );
+
for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
static const char *dma_str[] = {
[DMA_BIDIRECTIONAL] = "bidi",
@@ -1942,6 +1963,30 @@ static void ata_eh_link_report(struct at
res->hob_lbal, res->hob_lbam, res->hob_lbah,
res->device, qc->err_mask, ata_err_string(qc->err_mask),
qc->err_mask & AC_ERR_NCQ ? " <F>" : "");
+
+ if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ |
+ ATA_ERR) ) {
+ if (res->command & ATA_BUSY)
+ ata_dev_printk(qc->dev, KERN_ERR,
+ "status: {Busy}\n" );
+ else
+ ata_dev_printk(qc->dev, KERN_ERR,
+ "status: {%s%s%s%s}\n",
+ res->command & ATA_DRDY ? "DRDY " : "",
+ res->command & ATA_DF ? "DF " : "",
+ res->command & ATA_DRQ ? "DRQ " : "",
+ res->command & ATA_ERR ? "ERR " : "" );
+ }
+
+ if (cmd->command != ATA_CMD_PACKET &&
+ (res->feature & (ATA_ICRC | ATA_UNC | ATA_IDNF |
+ ATA_ABORTED)))
+ ata_dev_printk(qc->dev, KERN_ERR,
+ "error: {%s%s%s%s}\n",
+ res->feature & ATA_ICRC ? "ICRC " : "",
+ res->feature & ATA_UNC ? "UNC " : "",
+ res->feature & ATA_IDNF ? "IDNF " : "",
+ res->feature & ATA_ABORTED ? "ABRT " : "" );
}
}
diff -puN include/linux/ata.h~libata-add-human-readable-error-value-decoding-v3
include/linux/ata.h
--- a/include/linux/ata.h~libata-add-human-readable-error-value-decoding-v3
+++ a/include/linux/ata.h
@@ -287,6 +287,15 @@ enum {
SERR_PROTOCOL = (1 << 10), /* protocol violation */
SERR_INTERNAL = (1 << 11), /* host internal error */
SERR_PHYRDY_CHG = (1 << 16), /* PHY RDY changed */
+ SERR_PHY_INT_ERR = (1 << 17), /* PHY internal error */
+ SERR_COMM_WAKE = (1 << 18), /* Comm wake */
+ SERR_10B_8B_ERR = (1 << 19), /* 10b to 8b decode error */
+ SERR_DISPARITY = (1 << 20), /* Disparity */
+ SERR_CRC = (1 << 21), /* CRC error */
+ SERR_HANDSHAKE = (1 << 22), /* Handshake error */
+ SERR_LINK_SEQ_ERR = (1 << 23), /* Link sequence error */
+ SERR_TRANS_ST_ERROR = (1 << 24), /* Transport state trans. error */
+ SERR_UNRECOG_FIS = (1 << 25), /* Unrecognized FIS */
SERR_DEV_XCHG = (1 << 26), /* device exchanged */
/* struct ata_taskfile flags */
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
git-libata-all.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
