The patch titled
visor: termios bits
has been removed from the -mm tree. Its filename was
visor-termios-bits.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: visor: termios bits
From: Alan Cox <[EMAIL PROTECTED]>
Visor has a huge complex routine which displays termios bits for debug but
doesn't do anything. Get the correct behaviour by removing it all
Signed-off-by: Alan Cox <[EMAIL PROTECTED]>
Cc: Greg KH <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
diff -puN drivers/usb/serial/visor.c~visor-termios-bits
drivers/usb/serial/visor.c
--- a/drivers/usb/serial/visor.c~visor-termios-bits
+++ a/drivers/usb/serial/visor.c
@@ -46,7 +46,6 @@ static int visor_probe (struct usb_ser
static int visor_calc_num_ports(struct usb_serial *serial);
static void visor_shutdown (struct usb_serial *serial);
static int visor_ioctl (struct usb_serial_port *port, struct
file * file, unsigned int cmd, unsigned long arg);
-static void visor_set_termios (struct usb_serial_port *port, struct ktermios
*old_termios);
static void visor_write_bulk_callback (struct urb *urb);
static void visor_read_bulk_callback (struct urb *urb);
static void visor_read_int_callback (struct urb *urb);
@@ -203,7 +202,6 @@ static struct usb_serial_driver handspri
.calc_num_ports = visor_calc_num_ports,
.shutdown = visor_shutdown,
.ioctl = visor_ioctl,
- .set_termios = visor_set_termios,
.write = visor_write,
.write_room = visor_write_room,
.chars_in_buffer = visor_chars_in_buffer,
@@ -234,7 +232,6 @@ static struct usb_serial_driver clie_5_d
.calc_num_ports = visor_calc_num_ports,
.shutdown = visor_shutdown,
.ioctl = visor_ioctl,
- .set_termios = visor_set_termios,
.write = visor_write,
.write_room = visor_write_room,
.chars_in_buffer = visor_chars_in_buffer,
@@ -262,7 +259,6 @@ static struct usb_serial_driver clie_3_5
.unthrottle = visor_unthrottle,
.attach = clie_3_5_startup,
.ioctl = visor_ioctl,
- .set_termios = visor_set_termios,
.write = visor_write,
.write_room = visor_write_room,
.chars_in_buffer = visor_chars_in_buffer,
@@ -936,66 +932,6 @@ static int visor_ioctl (struct usb_seria
return -ENOIOCTLCMD;
}
-
-/* This function is all nice and good, but we don't change anything based on
it :) */
-static void visor_set_termios (struct usb_serial_port *port, struct ktermios
*old_termios)
-{
- unsigned int cflag;
-
- dbg("%s - port %d", __FUNCTION__, port->number);
-
- if ((!port->tty) || (!port->tty->termios)) {
- dbg("%s - no tty structures", __FUNCTION__);
- return;
- }
-
- cflag = port->tty->termios->c_cflag;
-
- /* get the byte size */
- switch (cflag & CSIZE) {
- case CS5: dbg("%s - data bits = 5", __FUNCTION__);
break;
- case CS6: dbg("%s - data bits = 6", __FUNCTION__);
break;
- case CS7: dbg("%s - data bits = 7", __FUNCTION__);
break;
- default:
- case CS8: dbg("%s - data bits = 8", __FUNCTION__);
break;
- }
-
- /* determine the parity */
- if (cflag & PARENB)
- if (cflag & PARODD)
- dbg("%s - parity = odd", __FUNCTION__);
- else
- dbg("%s - parity = even", __FUNCTION__);
- else
- dbg("%s - parity = none", __FUNCTION__);
-
- /* figure out the stop bits requested */
- if (cflag & CSTOPB)
- dbg("%s - stop bits = 2", __FUNCTION__);
- else
- dbg("%s - stop bits = 1", __FUNCTION__);
-
-
- /* figure out the flow control settings */
- if (cflag & CRTSCTS)
- dbg("%s - RTS/CTS is enabled", __FUNCTION__);
- else
- dbg("%s - RTS/CTS is disabled", __FUNCTION__);
-
- /* determine software flow control */
- if (I_IXOFF(port->tty))
- dbg("%s - XON/XOFF is enabled, XON = %2x, XOFF = %2x",
- __FUNCTION__, START_CHAR(port->tty), STOP_CHAR(port->tty));
- else
- dbg("%s - XON/XOFF is disabled", __FUNCTION__);
-
- /* get the baud rate wanted */
- dbg("%s - baud rate = %d", __FUNCTION__, tty_get_baud_rate(port->tty));
-
- return;
-}
-
-
static int __init visor_init (void)
{
int i, retval;
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
git-libata-all.patch
introduce-dma_mask_none-as-a-signal-for-unable-to-do.patch
pcmcia-use-dma_mask_none-for-the-default-for-all.patch
serial_txx9-cleanup-includes.patch
serial-keep-the-dtr-setting-for-serial-console.patch
8250_pci-autodetect-mainpine-cards.patch
8250_pci-autodetect-mainpine-cards-fix.patch
wake-up-from-a-serial-port.patch
git-scsi-misc.patch
initio-fix-conflict-when-loading-driver.patch
geode-mfgpt-support-for-geode-class-machines.patch
geode-mfgpt-clock-event-device-support.patch
security-convert-lsm-into-a-static-interface-vs-fix-null-pointer-dereference-in-__vm_enough_memory.patch
blackfin-enable-arbitary-speed-serial-setting.patch
tty-bring-the-old-cris-driver-back-somewhere-into-the.patch
mxser-remove-use-of-dead-tty_flipbuf_size-definition.patch
jsm-remove-further-unneeded-crud.patch
ttyh-remove-dead-define.patch
codingstyle-relax-the-80-cole-rule.patch
add-config_vt_unicode.patch
keys-missing-word-in-documentation.patch
ide-cd-is-unmaintained.patch
tty-expose-new-methods-needed-for-drivers-to-get-termios.patch
tty-expose-new-methods-needed-for-drivers-to-get-termios-fix.patch
fs-correct-sus-compliance-for-open-of-large-file-without.patch
sysctl-remove-broken-cdrom-binary-sysctls.patch
mxser-remove-commented-crap.patch
char-cyclades-remove-bottom-half-processing.patch
usb_serial-stop-passing-null-to-functions-that-expect-data.patch
ark3116-update-termios-handling.patch
usb-serial-kill-another-case-we-pass-null-and-shouldnt.patch
ch341-fix-termios-handling.patch
digi_acceleport-fix-termios-and-also-readability-a-bit.patch
empeg-clean-up-and-handle-speeds.patch
ir_usb-termios-handling.patch
keyspan-termios-tidy.patch
kobil_sct-termios-encoding-fixups.patch
option-termios-handling.patch
sierra-termios.patch
usb-serial-handle-null-termios-methods-as-no-hardware-changing-support.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
