The patch titled
Convert cpu_sibling_map to a per_cpu data array: ppc64
has been removed from the -mm tree. Its filename was
convert-cpu_sibling_map-to-a-per_cpu-data-array-ppc64.patch
This patch was dropped because it was folded into
convert-cpu_sibling_map-to-be-a-per-cpu-variable.patch
------------------------------------------------------
Subject: Convert cpu_sibling_map to a per_cpu data array: ppc64
From: Mike Travis <[EMAIL PROTECTED]>
Convert cpu_sibling_map to a per_cpu cpumask_t array for the ppc64
architecture. This fixes build errors in block/blktrace.c and
kernel/sched.c when CONFIG_SCHED_SMT is defined.
Signed-off-by: Mike Travis <[EMAIL PROTECTED]>
Cc: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
Cc: Paul Mackerras <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
arch/powerpc/kernel/setup-common.c | 20 ++++++++++++++++----
arch/powerpc/kernel/setup_64.c | 3 +++
arch/powerpc/kernel/smp.c | 4 ++--
arch/powerpc/platforms/cell/cbe_cpufreq.c | 2 +-
include/asm-powerpc/smp.h | 4 +++-
include/asm-powerpc/topology.h | 2 +-
6 files changed, 26 insertions(+), 9 deletions(-)
diff -puN
arch/powerpc/kernel/setup-common.c~convert-cpu_sibling_map-to-a-per_cpu-data-array-ppc64
arch/powerpc/kernel/setup-common.c
---
a/arch/powerpc/kernel/setup-common.c~convert-cpu_sibling_map-to-a-per_cpu-data-array-ppc64
+++ a/arch/powerpc/kernel/setup-common.c
@@ -413,16 +413,28 @@ void __init smp_setup_cpu_maps(void)
of_node_put(dn);
}
+ vdso_data->processorCount = num_present_cpus();
+#endif /* CONFIG_PPC64 */
+}
+
+/*
+ * Being that cpu_sibling_map is now a per_cpu array, then it cannot
+ * be initialized until the per_cpu areas have been created. This
+ * function is now called from setup_per_cpu_areas().
+ */
+void __init smp_setup_cpu_sibling_map(void)
+{
+#if defined(CONFIG_PPC64)
+ int cpu;
+
/*
* Do the sibling map; assume only two threads per processor.
*/
for_each_possible_cpu(cpu) {
- cpu_set(cpu, cpu_sibling_map[cpu]);
+ cpu_set(cpu, per_cpu(cpu_sibling_map, cpu));
if (cpu_has_feature(CPU_FTR_SMT))
- cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]);
+ cpu_set(cpu ^ 0x1, per_cpu(cpu_sibling_map, cpu));
}
-
- vdso_data->processorCount = num_present_cpus();
#endif /* CONFIG_PPC64 */
}
#endif /* CONFIG_SMP */
diff -puN
arch/powerpc/kernel/smp.c~convert-cpu_sibling_map-to-a-per_cpu-data-array-ppc64
arch/powerpc/kernel/smp.c
---
a/arch/powerpc/kernel/smp.c~convert-cpu_sibling_map-to-a-per_cpu-data-array-ppc64
+++ a/arch/powerpc/kernel/smp.c
@@ -61,11 +61,11 @@ struct thread_info *secondary_ti;
cpumask_t cpu_possible_map = CPU_MASK_NONE;
cpumask_t cpu_online_map = CPU_MASK_NONE;
-cpumask_t cpu_sibling_map[NR_CPUS] = { [0 ... NR_CPUS-1] = CPU_MASK_NONE };
+DEFINE_PER_CPU(cpumask_t, cpu_sibling_map) = CPU_MASK_NONE;
EXPORT_SYMBOL(cpu_online_map);
EXPORT_SYMBOL(cpu_possible_map);
-EXPORT_SYMBOL(cpu_sibling_map);
+EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
/* SMP operations for this machine */
struct smp_ops_t *smp_ops;
diff -puN
arch/powerpc/platforms/cell/cbe_cpufreq.c~convert-cpu_sibling_map-to-a-per_cpu-data-array-ppc64
arch/powerpc/platforms/cell/cbe_cpufreq.c
---
a/arch/powerpc/platforms/cell/cbe_cpufreq.c~convert-cpu_sibling_map-to-a-per_cpu-data-array-ppc64
+++ a/arch/powerpc/platforms/cell/cbe_cpufreq.c
@@ -117,7 +117,7 @@ static int cbe_cpufreq_cpu_init(struct c
policy->cur = cbe_freqs[cur_pmode].frequency;
#ifdef CONFIG_SMP
- policy->cpus = cpu_sibling_map[policy->cpu];
+ policy->cpus = per_cpu(cpu_sibling_map, policy->cpu);
#endif
cpufreq_frequency_table_get_attr(cbe_freqs, policy->cpu);
diff -puN
include/asm-powerpc/smp.h~convert-cpu_sibling_map-to-a-per_cpu-data-array-ppc64
include/asm-powerpc/smp.h
---
a/include/asm-powerpc/smp.h~convert-cpu_sibling_map-to-a-per_cpu-data-array-ppc64
+++ a/include/asm-powerpc/smp.h
@@ -26,6 +26,7 @@
#ifdef CONFIG_PPC64
#include <asm/paca.h>
#endif
+#include <asm/percpu.h>
extern int boot_cpuid;
@@ -58,7 +59,7 @@ extern int smp_hw_index[];
(smp_hw_index[(cpu)] = (phys))
#endif
-extern cpumask_t cpu_sibling_map[NR_CPUS];
+DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
/* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
*
@@ -77,6 +78,7 @@ void smp_init_pSeries(void);
void smp_init_cell(void);
void smp_init_celleb(void);
void smp_setup_cpu_maps(void);
+void smp_setup_cpu_sibling_map(void);
extern int __cpu_disable(void);
extern void __cpu_die(unsigned int cpu);
diff -puN
include/asm-powerpc/topology.h~convert-cpu_sibling_map-to-a-per_cpu-data-array-ppc64
include/asm-powerpc/topology.h
---
a/include/asm-powerpc/topology.h~convert-cpu_sibling_map-to-a-per_cpu-data-array-ppc64
+++ a/include/asm-powerpc/topology.h
@@ -108,7 +108,7 @@ static inline void sysfs_remove_device_f
#ifdef CONFIG_PPC64
#include <asm/smp.h>
-#define topology_thread_siblings(cpu) (cpu_sibling_map[cpu])
+#define topology_thread_siblings(cpu) (per_cpu(cpu_sibling_map, cpu))
#endif
#endif
diff -puN
arch/powerpc/kernel/setup_64.c~convert-cpu_sibling_map-to-a-per_cpu-data-array-ppc64
arch/powerpc/kernel/setup_64.c
---
a/arch/powerpc/kernel/setup_64.c~convert-cpu_sibling_map-to-a-per_cpu-data-array-ppc64
+++ a/arch/powerpc/kernel/setup_64.c
@@ -597,6 +597,9 @@ void __init setup_per_cpu_areas(void)
paca[i].data_offset = ptr - __per_cpu_start;
memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
}
+
+ /* Now that per_cpu is setup, initialize cpu_sibling_map */
+ smp_setup_cpu_sibling_map();
}
#endif
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
x86-convert-cpu_core_map-to-be-a-per-cpu-variable.patch
convert-cpu_sibling_map-to-be-a-per-cpu-variable.patch
convert-cpu_sibling_map-to-a-per_cpu-data-array-ppc64.patch
convert-cpu_sibling_map-to-a-per_cpu-data-array-sparc64.patch
x86-convert-cpuinfo_x86-array-to-a-per_cpu-array.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
