The patch titled
cp2101: convert to new termios
has been removed from the -mm tree. Its filename was
cp2101-convert-to-new-termios.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: cp2101: convert to new termios
From: Alan Cox <[EMAIL PROTECTED]>
- Convert to new baud rate functions
- Add baud rate reporting
Signed-off-by: Alan Cox <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/usb/serial/cp2101.c | 48 +++++++---------------------------
1 file changed, 11 insertions(+), 37 deletions(-)
diff -puN drivers/usb/serial/cp2101.c~cp2101-convert-to-new-termios
drivers/usb/serial/cp2101.c
--- a/drivers/usb/serial/cp2101.c~cp2101-convert-to-new-termios
+++ a/drivers/usb/serial/cp2101.c
@@ -361,7 +361,6 @@ static void cp2101_get_termios (struct u
dbg("%s - no tty structures", __FUNCTION__);
return;
}
- cflag = port->tty->termios->c_cflag;
cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2);
/* Convert to baudrate */
@@ -369,40 +368,9 @@ static void cp2101_get_termios (struct u
baud = BAUD_RATE_GEN_FREQ / baud;
dbg("%s - baud rate = %d", __FUNCTION__, baud);
- cflag &= ~CBAUD;
- switch (baud) {
- /*
- * The baud rates which are commented out below
- * appear to be supported by the device
- * but are non-standard
- */
- case 600: cflag |= B600; break;
- case 1200: cflag |= B1200; break;
- case 1800: cflag |= B1800; break;
- case 2400: cflag |= B2400; break;
- case 4800: cflag |= B4800; break;
- /*case 7200: cflag |= B7200; break;*/
- case 9600: cflag |= B9600; break;
- /*case 14400: cflag |= B14400; break;*/
- case 19200: cflag |= B19200; break;
- /*case 28800: cflag |= B28800; break;*/
- case 38400: cflag |= B38400; break;
- /*case 55854: cflag |= B55054; break;*/
- case 57600: cflag |= B57600; break;
- case 115200: cflag |= B115200; break;
- /*case 127117: cflag |= B127117; break;*/
- case 230400: cflag |= B230400; break;
- case 460800: cflag |= B460800; break;
- case 921600: cflag |= B921600; break;
- /*case 3686400: cflag |= B3686400; break;*/
- default:
- dbg("%s - Baud rate is not supported, "
- "using 9600 baud", __FUNCTION__);
- cflag |= B9600;
- cp2101_set_config_single(port, CP2101_BAUDRATE,
- (BAUD_RATE_GEN_FREQ/9600));
- break;
- }
+
+ tty_encode_baud_rate(port->tty, baud, baud);
+ cflag = port->tty->termios->c_cflag;
cp2101_get_config(port, CP2101_BITS, &bits, 2);
cflag &= ~CSIZE;
@@ -516,7 +484,7 @@ static void cp2101_get_termios (struct u
static void cp2101_set_termios (struct usb_serial_port *port,
struct ktermios *old_termios)
{
- unsigned int cflag, old_cflag=0;
+ unsigned int cflag, old_cflag;
int baud=0, bits;
unsigned int modem_ctl[4];
@@ -526,6 +494,8 @@ static void cp2101_set_termios (struct u
dbg("%s - no tty structures", __FUNCTION__);
return;
}
+ port->tty->termios->c_cflag &= ~CMSPAR;
+
cflag = port->tty->termios->c_cflag;
old_cflag = old_termios->c_cflag;
baud = tty_get_baud_rate(port->tty);
@@ -563,11 +533,15 @@ static void cp2101_set_termios (struct u
dbg("%s - Setting baud rate to %d baud", __FUNCTION__,
baud);
if (cp2101_set_config_single(port, CP2101_BAUDRATE,
- (BAUD_RATE_GEN_FREQ / baud)))
+ (BAUD_RATE_GEN_FREQ / baud))) {
dev_err(&port->dev, "Baud rate requested not "
"supported by device\n");
+ baud = tty_termios_baud_rate(old_termios);
+ }
}
}
+ /* Report back the resulting baud rate */
+ tty_encode_baud_rate(port->tty, baud, baud);
/* If the number of data bits is to be updated */
if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
git-libata-all.patch
serial-keep-the-dtr-setting-for-serial-console.patch
initio-fix-conflict-when-loading-driver.patch
geode-lists-are-subscriber-only.patch
tty-kill-tty_flipbuf_size.patch
drivers-edac-turnon-edac-device-error-logging.patch
drivers-edac-use-round_jiffies_relative.patch
drivers-edac-add-cell-xdr-memory-types.patch
drivers-edac-add-cell-mc-driver.patch
drivers-edac-i3000-code-tidying.patch
drivers-edac-i3000-replace-macros-with-functions.patch
drivers-edac-add-freescale-mpc85xx-driver.patch
drivers-edac-add-marvell-mv64x60-driver.patch
drivers-edac-add-marvell-mv64x60-driver-fix.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
