The patch titled
rpadlpar_sysfs.c: unbork
has been removed from the -mm tree. Its filename was
rpadlpar_sysfsc-unbork.patch
This patch was dropped because it is obsolete
------------------------------------------------------
Subject: rpadlpar_sysfs.c: unbork
From: Kamalesh Babulal <[EMAIL PROTECTED]>
On Tue, Nov 06, 2007 at 10:19:28AM -0800, Badari Pulavarty wrote:
> On Tue, 2007-11-06 at 21:04 +0530, Kamalesh Babulal wrote:
> > Hi Andrew,
> >
> > The build fails with following error
> >
> > CC drivers/pci/hotplug/rpadlpar_sysfs.o
> > drivers/pci/hotplug/rpadlpar_sysfs.c:133: error: initializer element is not
> > constant
> > drivers/pci/hotplug/rpadlpar_sysfs.c:133: error: (near initialization for
> > `dlpar_io_kset.kobj.parent')
> > drivers/pci/hotplug/rpadlpar_sysfs.c:133: error: initializer element is not
> > constant
> > drivers/pci/hotplug/rpadlpar_sysfs.c:133: error: (near initialization for
> > `dlpar_io_kset.kobj')
> > drivers/pci/hotplug/rpadlpar_sysfs.c:134: error: unknown field `ktype'
> > specified in initializer
> > drivers/pci/hotplug/rpadlpar_sysfs.c:134: warning: initialization from
> > incompatible pointer type
> > make[3]: *** [drivers/pci/hotplug/rpadlpar_sysfs.o] Error 1
> > make[2]: *** [drivers/pci/hotplug] Error 2
> > make[1]: *** [drivers/pci] Error 2
> > make: *** [drivers] Error 2
> >
> > The patch,
> > gregkh-driver-kset-convert-pci-hotplug-to-use-kset_create_and_register.patch
> > is causing the build failure.
>
> Here is the fix (against 24-rc1 mm-brokenout). Can you try it ?
>
> Thanks,
> Badari
Hi Badari,
This patch fixes the buidl failure.
Tested-by: Kamalesh Babulal <[EMAIL PROTECTED]>
Signed-off-by: Badari Pulavarty <[EMAIL PROTECTED]>
Cc: Greg KH <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/pci/hotplug/rpadlpar_sysfs.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff -puN drivers/pci/hotplug/rpadlpar_sysfs.c~rpadlpar_sysfsc-unbork
drivers/pci/hotplug/rpadlpar_sysfs.c
--- a/drivers/pci/hotplug/rpadlpar_sysfs.c~rpadlpar_sysfsc-unbork
+++ a/drivers/pci/hotplug/rpadlpar_sysfs.c
@@ -129,14 +129,13 @@ struct kobj_type ktype_dlpar_io = {
};
struct kset dlpar_io_kset = {
- .kobj = {.ktype = &ktype_dlpar_io,
- .parent = &pci_hotplug_slots_kset->kobj},
- .ktype = &ktype_dlpar_io,
+ .kobj = {.ktype = &ktype_dlpar_io},
};
int dlpar_sysfs_init(void)
{
kobject_set_name(&dlpar_io_kset.kobj, DLPAR_KOBJ_NAME);
+ dlpar_io_kset.kobj.parent = &pci_hotplug_slots_kset->kobj;
if (kset_register(&dlpar_io_kset)) {
printk(KERN_ERR "rpadlpar_io: cannot register kset for %s\n",
kobject_name(&dlpar_io_kset.kobj));
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
rpadlpar_sysfsc-unbork.patch
sclp_cpi_sysc-unbork.patch
add-dma-engine-driver-for-freescale-mpc85xx-processors-fix.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
