The patch titled
remove references to net-modules.txt
has been added to the -mm tree. Its filename is
remove-references-to-net-modulestxt.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: remove references to net-modules.txt
From: Adrian Bunk <[EMAIL PROTECTED]>
When I removed net-modules.txt because it only contained ancient information I
missed that many Kconfig entries pointed to this ancient information.
Signed-off-by: Adrian Bunk <[EMAIL PROTECTED]>
Cc: "David S. Miller" <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
Documentation/networking/3c505.txt | 3
drivers/net/Kconfig | 199 +++++++++------------------
drivers/net/arcnet/Kconfig | 15 --
drivers/net/tulip/Kconfig | 21 --
4 files changed, 82 insertions(+), 156 deletions(-)
diff -puN
Documentation/networking/3c505.txt~remove-references-to-net-modulestxt
Documentation/networking/3c505.txt
--- a/Documentation/networking/3c505.txt~remove-references-to-net-modulestxt
+++ a/Documentation/networking/3c505.txt
@@ -14,8 +14,7 @@ If no base address is given at boot time
ports 0x300, 0x280 and 0x310 (in that order). If no IRQ is given, the driver
will try to probe for it.
-The driver can be used as a loadable module. See net-modules.txt for details
-of the parameters it can take.
+The driver can be used as a loadable module.
Theoretically, one instance of the driver can now run multiple cards,
in the standard way (when loading a module, say "modprobe 3c505
diff -puN drivers/net/Kconfig~remove-references-to-net-modulestxt
drivers/net/Kconfig
--- a/drivers/net/Kconfig~remove-references-to-net-modulestxt
+++ a/drivers/net/Kconfig
@@ -366,8 +366,7 @@ config MAC89x0
read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. This module will
+ To compile this driver as a module, choose M here. This module will
be called mac89x0.
config MACSONIC
@@ -380,8 +379,7 @@ config MACSONIC
one of these say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. This module will
+ To compile this driver as a module, choose M here. This module will
be called macsonic.
config MACMACE
@@ -619,8 +617,7 @@ config EL1
have problems. Some people suggest to ping ("man ping") a nearby
machine every minute ("man cron") when using this card.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called 3c501.
config EL2
@@ -632,8 +629,7 @@ config EL2
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called 3c503.
config ELPLUS
@@ -645,8 +641,7 @@ config ELPLUS
this type, say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called 3c505.
config EL16
@@ -657,8 +652,7 @@ config EL16
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called 3c507.
config EL3
@@ -673,8 +667,7 @@ config EL3
setup disk to disable Plug & Play mode, and to select the default
media type.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called 3c509.
config 3C515
@@ -685,8 +678,7 @@ config 3C515
network card, say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called 3c515.
config ELMC
@@ -697,8 +689,7 @@ config ELMC
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called 3c523.
config ELMC_II
@@ -709,8 +700,7 @@ config ELMC_II
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called 3c527.
config VORTEX
@@ -733,8 +723,7 @@ config VORTEX
<file:Documentation/networking/vortex.txt> and in the comments at
the beginning of <file:drivers/net/3c59x.c>.
- To compile this support as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>.
+ To compile this support as a module, choose M here.
config TYPHOON
tristate "3cr990 series \"Typhoon\" support"
@@ -751,8 +740,7 @@ config TYPHOON
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called typhoon.
config LANCE
@@ -789,8 +777,7 @@ config WD80x3
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called wd.
config ULTRAMCA
@@ -802,8 +789,7 @@ config ULTRAMCA
an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called smc-mca.
config ULTRA
@@ -822,8 +808,7 @@ config ULTRA
this but keep it in mind if you have such a SCSI card and have
problems.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called smc-ultra.
config ULTRA32
@@ -835,8 +820,7 @@ config ULTRA32
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called smc-ultra32.
config BFIN_MAC
@@ -897,8 +881,7 @@ config SMC9194
<file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called smc9194.
config SMC91X
@@ -916,8 +899,7 @@ config SMC91X
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called smc91x. If you want to compile it as a
- module, say M here and read <file:Documentation/kbuild/modules.txt>
- as well as <file:Documentation/networking/net-modules.txt>.
+ module, say M here and read <file:Documentation/kbuild/modules.txt>.
config NET_NETX
tristate "NetX Ethernet support"
@@ -926,8 +908,7 @@ config NET_NETX
help
This is support for the Hilscher netX builtin Ethernet ports
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called netx-eth.
config DM9000
@@ -938,9 +919,8 @@ config DM9000
---help---
Support for DM9000 chipset.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module will be
- called dm9000.
+ To compile this driver as a module, choose M here. The module
+ will be called dm9000.
config SMC911X
tristate "SMSC LAN911[5678] support"
@@ -980,8 +960,7 @@ config NI5010
<http://www.tldp.org/docs.html#howto>. Note that this is still
experimental code.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called ni5010.
config NI52
@@ -992,8 +971,7 @@ config NI52
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called ni52.
config NI65
@@ -1004,8 +982,7 @@ config NI65
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called ni65.
source "drivers/net/tulip/Kconfig"
@@ -1019,8 +996,7 @@ config AT1700
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called at1700.
config DEPCA
@@ -1033,8 +1009,7 @@ config DEPCA
<http://www.tldp.org/docs.html#howto> as well as
<file:drivers/net/depca.c>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called depca.
config HP100
@@ -1045,8 +1020,7 @@ config HP100
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called hp100.
config NET_ISA
@@ -1075,8 +1049,7 @@ config E2100
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called e2100.
config EWRK3
@@ -1090,8 +1063,7 @@ config EWRK3
well as the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called ewrk3.
config EEXPRESS
@@ -1105,8 +1077,7 @@ config EEXPRESS
because the driver was very unreliable. We now have a new driver
that should do better.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called eexpress.
config EEXPRESS_PRO
@@ -1119,8 +1090,7 @@ config EEXPRESS_PRO
driver. Please read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called eepro.
config HPLAN_PLUS
@@ -1132,8 +1102,7 @@ config HPLAN_PLUS
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called hp-plus.
config HPLAN
@@ -1145,8 +1114,7 @@ config HPLAN
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called hp.
config LP486E
@@ -1165,8 +1133,7 @@ config ETH16I
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called eth16i.
config NE2000
@@ -1186,8 +1153,7 @@ config NE2000
laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
below.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called ne.
config ZNET
@@ -1208,8 +1174,7 @@ config SEEQ8005
is for you, read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called seeq8005.
config NE2_MCA
@@ -1221,8 +1186,7 @@ config NE2_MCA
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called ne2.
config IBMLANA
@@ -1233,8 +1197,7 @@ config IBMLANA
CONFIG_MCA to use this driver. It is both available as an in-kernel
driver and as a module.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The only
+ To compile this driver as a module, choose M here. The only
currently supported card is the IBM LAN Adapter/A for Ethernet. It
will both support 16K and 32K memory windows, however a 32K window
gives a better security against packet losses. Usage of multiple
@@ -1248,8 +1211,7 @@ config IBMVETH
This driver supports virtual ethernet adapters on newer IBM iSeries
and pSeries systems.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module will
+ To compile this driver as a module, choose M here. The module will
be called ibmveth.
source "drivers/net/ibm_emac/Kconfig"
@@ -1279,8 +1241,7 @@ config PCNET32
answer Y here and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called pcnet32.
config PCNET32_NAPI
@@ -1307,8 +1268,7 @@ config AMD8111_ETH
answer Y here and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called amd8111e.
config AMD8111E_NAPI
@@ -1362,8 +1322,7 @@ config AC3200
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called ac3200.
config APRICOT
@@ -1374,9 +1333,8 @@ config APRICOT
read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module will be
- called apricot.
+ To compile this driver as a module, choose M here. The module
+ will be called apricot.
config B44
tristate "Broadcom 440x/47xx ethernet support"
@@ -1388,9 +1346,8 @@ config B44
or M and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module will be
- called b44.
+ To compile this driver as a module, choose M here. The module
+ will be called b44.
# Auto-select SSB PCI-HOST support, if possible
config B44_PCI_AUTOSELECT
@@ -1419,9 +1376,8 @@ config FORCEDETH
read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module will be
- called forcedeth.
+ To compile this driver as a module, choose M here. The module
+ will be called forcedeth.
config FORCEDETH_NAPI
bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
@@ -1447,9 +1403,8 @@ config CS89x0
<http://www.tldp.org/docs.html#howto> as well as
<file:Documentation/networking/cs89x0.txt>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module will be
- called cs89x0.
+ To compile this driver as a module, choose M here. The module
+ will be called cs89x0.
config TC35815
tristate "TOSHIBA TC35815 Ethernet support"
@@ -1465,8 +1420,7 @@ config EEPRO100
card, say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called eepro100.
@@ -1493,8 +1447,7 @@ config E100
More specific information on configuring the driver is in
<file:Documentation/networking/e100.txt>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called e100.
config LNE390
@@ -1506,8 +1459,7 @@ config LNE390
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called lne390.
config FEALNX
@@ -1547,8 +1499,7 @@ config NE2K_PCI
NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
Holtek HT80232 Holtek HT80229
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called ne2k-pci.
config NE3210
@@ -1561,8 +1512,7 @@ config NE3210
<http://www.tldp.org/docs.html#howto>. Note that this driver
will NOT WORK for NE3200 cards as they are completely different.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called ne3210.
config ES3210
@@ -1574,8 +1524,7 @@ config ES3210
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called es3210.
config 8139CP
@@ -1705,8 +1654,7 @@ config TLAN
Compaq NetFlex and Olicom cards. Please read the file
<file:Documentation/networking/tlan.txt> for more details.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called tlan.
Please email feedback to <[EMAIL PROTECTED]>.
@@ -1996,8 +1944,7 @@ config E1000
More specific information on configuring the driver is in
<file:Documentation/networking/e1000.txt>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called e1000.
config E1000_NAPI
@@ -2042,8 +1989,7 @@ config E1000E
More specific information on configuring the driver is in
<file:Documentation/networking/e1000e.txt>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called e1000e.
source "drivers/net/ixp2000/Kconfig"
@@ -2076,8 +2022,7 @@ config HAMACHI
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module will be
+ To compile this driver as a module, choose M here. The module will be
called hamachi.
config YELLOWFIN
@@ -2526,8 +2471,7 @@ config IXGBE
More specific information on configuring the driver is in
<file:Documentation/networking/ixgbe.txt>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called ixgbe.
config IXGB
@@ -2549,8 +2493,7 @@ config IXGB
More specific information on configuring the driver is in
<file:Documentation/networking/ixgb.txt>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called ixgb.
config IXGB_NAPI
@@ -2603,8 +2546,7 @@ config MYRI10GE
<http://www.myri.com/scs/download-Myri10GE.html>
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called myri10ge.
config NETXEN_NIC
@@ -2828,10 +2770,9 @@ config PLIP
with the PLIP support in Linux versions 1.0.x. This option enlarges
your kernel by about 8 KB.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module will be
- called plip. If unsure, say Y or M, in case you buy a laptop
- later.
+ To compile this driver as a module, choose M here. The module
+ will be called plip. If unsure, say Y or M, in case you buy
+ a laptop later.
config PPP
tristate "PPP (point-to-point protocol) support"
@@ -2861,8 +2802,7 @@ config PPP
If you said Y to "Version information on all symbols" above, then
you cannot compile the PPP driver into the kernel; you can then only
compile it as a module. To compile this driver as a module, choose M
- here and read <file:Documentation/networking/net-modules.txt>.
- The module will be called ppp_generic.
+ here. The module will be called ppp_generic.
config PPP_MULTILINK
bool "PPP multilink support (EXPERIMENTAL)"
@@ -3023,9 +2963,8 @@ config SLIP
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
support will enlarge your kernel by about 4 KB. If unsure, say N.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module will be
- called slip.
+ To compile this driver as a module, choose M here. The module
+ will be called slip.
config SLIP_COMPRESSED
bool "CSLIP compressed headers"
diff -puN drivers/net/arcnet/Kconfig~remove-references-to-net-modulestxt
drivers/net/arcnet/Kconfig
--- a/drivers/net/arcnet/Kconfig~remove-references-to-net-modulestxt
+++ a/drivers/net/arcnet/Kconfig
@@ -19,8 +19,7 @@ menuconfig ARCNET
from <http://www.tldp.org/docs.html#howto>(even though ARCnet
is not really Ethernet).
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module will
+ To compile this driver as a module, choose M here. The module will
be called arcnet.
if ARCNET
@@ -81,8 +80,7 @@ config ARCNET_COM90xx
have always used the old ARCnet driver without knowing what type of
card you had, this is probably the one for you.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module will
+ To compile this driver as a module, choose M here. The module will
be called com90xx.
config ARCNET_COM90xxIO
@@ -93,8 +91,7 @@ config ARCNET_COM90xxIO
the normal driver. Only use it if your card doesn't support shared
memory.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module will
+ To compile this driver as a module, choose M here. The module will
be called com90io.
config ARCNET_RIM_I
@@ -105,8 +102,7 @@ config ARCNET_RIM_I
driver is completely untested, so if you have one of these cards,
please mail <[EMAIL PROTECTED]>, especially if it works!
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module will
+ To compile this driver as a module, choose M here. The module will
be called arc-rimi.
config ARCNET_COM20020
@@ -116,8 +112,7 @@ config ARCNET_COM20020
things as promiscuous mode, so packet sniffing is possible, and
extra diagnostic information.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module will
+ To compile this driver as a module, choose M here. The module will
be called com20020.
config ARCNET_COM20020_ISA
diff -puN drivers/net/tulip/Kconfig~remove-references-to-net-modulestxt
drivers/net/tulip/Kconfig
--- a/drivers/net/tulip/Kconfig~remove-references-to-net-modulestxt
+++ a/drivers/net/tulip/Kconfig
@@ -24,8 +24,7 @@ config DE2104X
will say Y here.) Do read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module will
+ To compile this driver as a module, choose M here. The module will
be called de2104x.
config TULIP
@@ -42,8 +41,7 @@ config TULIP
will say Y here.) Do read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module will
+ To compile this driver as a module, choose M here. The module will
be called tulip.
config TULIP_MWI
@@ -104,8 +102,7 @@ config DE4X5
information is contained in
<file:Documentation/networking/de4x5.txt>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module will
+ To compile this driver as a module, choose M here. The module will
be called de4x5.
config WINBOND_840
@@ -129,8 +126,7 @@ config DM9102
(Ethernet) card, say Y. Some information is contained in the file
<file:Documentation/networking/dmfe.txt>.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module will
+ To compile this driver as a module, choose M here. The module will
be called dmfe.
config ULI526X
@@ -141,8 +137,7 @@ config ULI526X
This driver is for ULi M5261/M5263 10/100M Ethernet Controller
(<http://www.uli.com.tw/>).
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module will
+ To compile this driver as a module, choose M here. The module will
be called uli526x.
config PCMCIA_XIRCOM
@@ -154,8 +149,7 @@ config PCMCIA_XIRCOM
as with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and
ASIX.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module will
+ To compile this driver as a module, choose M here. The module will
be called xircom_cb. If unsure, say N.
config PCMCIA_XIRTULIP
@@ -168,8 +162,7 @@ config PCMCIA_XIRTULIP
as with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and
ASIX.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module will
+ To compile this driver as a module, choose M here. The module will
be called xircom_tulip_cb. If unsure, say N.
endif # NET_TULIP
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
lguest_userc-fix-memory-leak.patch
video-sis-fix-negative-array-index.patch
git-avr32.patch
git-dvb.patch
git-hwmon.patch
git-gfs2-nmw.patch
git-mtd.patch
git-net.patch
make-sunrpc-xprtsockcxs_setup_udptcp-static.patch
git-netdev-all.patch
drivers-net-chelsio-if-0-unused-functions.patch
drivers-bluetooth-bpa10xc-fix-memleak.patch
drivers-bluetooth-btsdioc-fix-double-free.patch
git-nfs-make-nfs_wb_page_priority-static.patch
fs-nfs-dirc-should-include-internalh.patch
git-ocfs2.patch
proper-prototype-for-kernel-schedcmigration_init.patch
git-scsi-misc.patch
scsi-advansysc-make-3-functions-static.patch
scsi-qla2xxx-possible-cleanups.patch
usb-mon-mon_binc-cleanups.patch
xtensa-iss_net_setup-must-be-__init.patch
xtensa-kernel-setupc-remove-dead-code.patch
sunrpc-xprtrdma-transportc-fix-use-after-free.patch
fix-mm-utilckrealloc.patch
fuse_file_alloc-fix-null-dereferences.patch
pidns-place-under-config_experimental.patch
pidns-place-under-config_experimental-checkpatch-fixes.patch
feature-removal-schedule-remove-sa_-flags-entry.patch
kernel-taskstatsc-fix-bogus-nlmsg_free.patch
mm-hugetlbc-make-a-function-static.patch
mm-page-writebackc-make-a-function-static.patch
make-__vmalloc_area_node-static.patch
blackfin-remove-dump_thread.patch
kernel-power-diskc-make-code-static.patch
make-kernel_shutdown_prepare-static.patch
kernel-power-move-function-prototypes-to-header.patch
kill-udffs_dateversion.patch
make-ipc-utilcsysvipc_find_ipc-static.patch
cleanup-after-apus-removal.patch
remove-mm_ptovvtop.patch
remove-__attribute_used__.patch
remove-__attribute_used__-checkpatch-fixes.patch
proper-show_interrupts-prototype.patch
scheduled-oss-driver-removal.patch
linux-inith-simplify-__meminitexit-dependencies.patch
proper-prototype-for-signals_init.patch
kernel-ptracec-should-include-linux-syscallsh.patch
make-srcu_readers_active-static.patch
kernel-notifierc-should-include-linux-rebooth.patch
proper-prototype-for-get_filesystem_list.patch
fs-utimesc-should-include-linux-syscallsh.patch
fs-signalfdc-should-include-linux-syscallsh.patch
fs-eventfdc-should-include-linux-syscallsh.patch
proper-prototype-for-vty_init.patch
drivers-misc-lkdtmc-cleanups.patch
power_supply_ledssysfsc-should-include-power_supplyh.patch
fs-ecryptfs-possible-cleanups.patch
make-video-geode-lxfb_corecgeode_modedb-static.patch
video-hpfbc-section-fix.patch
ext4-superc-fix-ifdefs.patch
make-jbd-journalc__journal_abort_hard-static.patch
move-edactxt-two-levels-up.patch
remove-documentation-smptxt.patch
kernel-cgroupc-remove-dead-code.patch
kernel-cgroupc-make-2-functions-static.patch
memory-controller-add-per-container-lru-and-reclaim-v7.patch
memory-controller-add-switch-to-control-what-type-of-pages-to-limit-v7.patch
fix-m32r-__xchg.patch
reiser4.patch
remove-references-to-net-modulestxt.patch
blk_dev_idecd-help-remove-outdated-note.patch
always-export-pci_scan_single_device.patch
x86-acpi_pciprobe_dmi_table-must-be-__devinitdata.patch
remove-additional-pci_scan_child_bus-prototype.patch
remove-saa7134-oss.patch
x86_64-remove-acpi_pci_link_exit.patch
x86-mce_64c-make-struct-mcelog-static.patch
x86-e820_64c-make-2-functions-static.patch
x86-nmi_64c-make-code-static.patch
x86-pci-calgary_64c-make-a-variable-static.patch
x86-pci-dma_64c-cleanups.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
