The patch titled
serial_core: bring mostly into line with coding style
has been added to the -mm tree. Its filename is
serial_core-bring-mostly-into-line-with-coding-style.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: serial_core: bring mostly into line with coding style
From: Alan Cox <[EMAIL PROTECTED]>
Signed-off-by: Alan Cox <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/serial/serial_core.c | 52 ++++++++++++++++-----------------
1 file changed, 26 insertions(+), 26 deletions(-)
diff -puN
drivers/serial/serial_core.c~serial_core-bring-mostly-into-line-with-coding-style
drivers/serial/serial_core.c
---
a/drivers/serial/serial_core.c~serial_core-bring-mostly-into-line-with-coding-style
+++ a/drivers/serial/serial_core.c
@@ -58,7 +58,8 @@ static struct lock_class_key port_lock_k
#define uart_console(port) (0)
#endif
-static void uart_change_speed(struct uart_state *state, struct ktermios
*old_termios);
+static void uart_change_speed(struct uart_state *state,
+ struct ktermios *old_termios);
static void uart_wait_until_sent(struct tty_struct *tty, int timeout);
static void uart_change_pm(struct uart_state *state, int pm_state);
@@ -129,8 +130,8 @@ uart_update_mctrl(struct uart_port *port
spin_unlock_irqrestore(&port->lock, flags);
}
-#define uart_set_mctrl(port,set) uart_update_mctrl(port,set,0)
-#define uart_clear_mctrl(port,clear) uart_update_mctrl(port,0,clear)
+#define uart_set_mctrl(port, set) uart_update_mctrl(port, set, 0)
+#define uart_clear_mctrl(port, clear) uart_update_mctrl(port, 0, clear)
/*
* Startup the port. This will be called once per open. All calls
@@ -290,7 +291,7 @@ uart_update_timeout(struct uart_port *po
break;
default:
bits = 10;
- break; // CS8
+ break; /* CS8 */
}
if (cflag & CSTOPB)
@@ -621,7 +622,7 @@ static int uart_get_info(struct uart_sta
tmp.close_delay = state->close_delay / 10;
tmp.closing_wait = state->closing_wait == USF_CLOSING_WAIT_NONE ?
ASYNC_CLOSING_WAIT_NONE :
- state->closing_wait / 10;
+ state->closing_wait / 10;
tmp.custom_divisor = port->custom_divisor;
tmp.hub6 = port->hub6;
tmp.io_type = port->iotype;
@@ -787,7 +788,8 @@ static int uart_set_info(struct uart_sta
* We failed anyway.
*/
retval = -EBUSY;
- goto exit; // Added to return the correct error -Ram
Gupta
+ /* Added to return the correct error -Ram Gupta */
+ goto exit;
}
}
@@ -857,7 +859,7 @@ static int uart_get_lsr_info(struct uart
((uart_circ_chars_pending(&state->info->xmit) > 0) &&
!state->info->tty->stopped && !state->info->tty->hw_stopped))
result &= ~TIOCSER_TEMT;
-
+
return put_user(result, value);
}
@@ -995,8 +997,8 @@ uart_wait_modem_status(struct uart_state
((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
- ret = 0;
- break;
+ ret = 0;
+ break;
}
schedule();
@@ -1136,7 +1138,8 @@ uart_ioctl(struct tty_struct *tty, struc
return ret;
}
-static void uart_set_termios(struct tty_struct *tty, struct ktermios
*old_termios)
+static void uart_set_termios(struct tty_struct *tty,
+ struct ktermios *old_termios)
{
struct uart_state *state = tty->driver_data;
unsigned long flags;
@@ -1212,7 +1215,7 @@ static void uart_close(struct tty_struct
{
struct uart_state *state = tty->driver_data;
struct uart_port *port;
-
+
BUG_ON(!kernel_locked());
if (!state || !state->port)
@@ -1277,8 +1280,8 @@ static void uart_close(struct tty_struct
uart_shutdown(state);
uart_flush_buffer(tty);
- tty_ldisc_flush(tty);
-
+ tty_ldisc_flush(tty);
+
tty->closing = 0;
state->info->tty = NULL;
@@ -1340,7 +1343,7 @@ static void uart_wait_until_sent(struct
expire = jiffies + timeout;
pr_debug("uart_wait_until_sent(%d), jiffies=%lu, expire=%lu...\n",
- port->line, jiffies, expire);
+ port->line, jiffies, expire);
/*
* Check whether the transmitter is empty every 'char_time'.
@@ -1459,10 +1462,9 @@ uart_block_til_ready(struct file *filp,
* have set TTY_IO_ERROR for a non-existant port.
*/
if ((filp->f_flags & O_NONBLOCK) ||
- (info->tty->termios->c_cflag & CLOCAL) ||
- (info->tty->flags & (1 << TTY_IO_ERROR))) {
+ (info->tty->termios->c_cflag & CLOCAL) ||
+ (info->tty->flags & (1 << TTY_IO_ERROR)))
break;
- }
/*
* Set DTR to allow modem to know we're waiting. Do
@@ -1673,7 +1675,7 @@ static int uart_line_info(char *buf, str
port->line, uart_type(port),
mmio ? "mmio:0x" : "port:",
mmio ? (unsigned long long)port->mapbase
- : (unsigned long long) port->iobase,
+ : (unsigned long long) port->iobase,
port->irq);
if (port->type == PORT_UNKNOWN) {
@@ -1681,8 +1683,7 @@ static int uart_line_info(char *buf, str
return ret + 1;
}
- if(capable(CAP_SYS_ADMIN))
- {
+ if (capable(CAP_SYS_ADMIN)) {
mutex_lock(&state->mutex);
pm_state = state->pm_state;
if (pm_state)
@@ -1708,12 +1709,12 @@ static int uart_line_info(char *buf, str
if (port->icount.overrun)
ret += sprintf(buf + ret, " oe:%d",
port->icount.overrun);
-
-#define INFOBIT(bit,str) \
+
+#define INFOBIT(bit, str) \
if (port->mctrl & (bit)) \
strncat(stat_buf, (str), sizeof(stat_buf) - \
strlen(stat_buf) - 2)
-#define STATBIT(bit,str) \
+#define STATBIT(bit, str) \
if (status & (bit)) \
strncat(stat_buf, (str), sizeof(stat_buf) - \
strlen(stat_buf) - 2)
@@ -1729,7 +1730,7 @@ static int uart_line_info(char *buf, str
if (stat_buf[0])
stat_buf[0] = ' ';
strcat(stat_buf, "\n");
-
+
ret += sprintf(buf + ret, stat_buf);
} else {
strcat(buf, "\n");
@@ -1990,9 +1991,8 @@ int uart_suspend_port(struct uart_driver
/*
* Wait for the transmitter to empty.
*/
- while (!ops->tx_empty(port)) {
+ while (!ops->tx_empty(port))
msleep(10);
- }
ops->shutdown(port);
}
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
termios-document-callback-more-clearly.patch
revert-keyspan-init-termios-properly.patch
git-arm.patch
git-libata-all.patch
pata_hpt37x-fix-outstanding-bug-reports-on-the-hpt374-and-37x-cable-detect-checkpatch-fixes.patch
libata-separate-out-ata_acpi_gtm_xfermask-from-pacpi_discover_modes.patch
libata-fix-ata_acpi_gtm_xfermask.patch
libata-implement-ata_timing_cycle2mode-and-use-it-in-libata-acpi-and-pata_acpi.patch
libata-reimplement-ata_acpi_cbl_80wire-using-ata_acpi_gtm_xfermask.patch
libata-add-ata_cbl_pata_ign.patch
pata_amd-update-mode-selection-for-nv-patas.patch
ahci-invalid-use-of-writel-readl-with-iomap.patch
libata-core-list-more-documentation-sources-for-reference.patch
libata-iordy-handling.patch
libata-sff-tf_load.patch
pata_ali-add-mitac-8317-and-derivatives.patch
pata_ali-lots-of-problems-still-showing-up-with-small-atapi-dma.patch
pata_hpt37x-fix-cable-detect-bug-spotted-by-sergei.patch
pata_isapnp-polled-devices.patch
pata_pcmcia-minor-cleanups-and-support-for-dual-channel-cards.patch
pata_ninja32-cardbus-ata-initial-support.patch
pcmcia-convert-some-internal-only-ioaddr_t-to-unsigned-int.patch
pcmcia-replace-kio_addr_t-with-unsigned-int-everywhere.patch
serial-keep-the-dtr-setting-for-serial-console.patch
quirk_vialatency-omit-reading-pci-revision-id.patch
quirk_vialatency-omit-reading-pci-revision-id-checkpatch-fixes.patch
git-scsi-rc-fixes.patch
initio-fix-conflict-when-loading-driver.patch
pata_amd-pata_via-de-couple-programming-of-pio-mwdma-and-udma-timings.patch
geode-lists-are-subscriber-only.patch
tty-kill-tty_flipbuf_size.patch
drivers-edac-turnon-edac-device-error-logging.patch
drivers-edac-use-round_jiffies_relative.patch
drivers-edac-add-cell-xdr-memory-types.patch
drivers-edac-add-cell-mc-driver.patch
drivers-edac-i3000-code-tidying.patch
drivers-edac-i3000-replace-macros-with-functions.patch
drivers-edac-add-freescale-mpc85xx-driver.patch
drivers-edac-add-marvell-mv64x60-driver.patch
drivers-edac-add-marvell-mv64x60-driver-fix.patch
dz-clean-up-and-improve-the-setup-of-termios-settings.patch
char-rocket-switch-long-delay-to-sleep.patch
char-rocket-printk-cleanup.patch
char-char-serial-remove-serial_type_normal-redefines.patch
char-mxser_new-ioaddresses-are-ulong.patch
char-stallion-fix-compiler-warnings.patch
char-riscom8-change-rc_init_drivers-prototype.patch
tty-add-the-new-termios2-ioctls-to-the-compatible.patch
tty-let-architectures-override-the-user-kernel-macros.patch
tty-s390-support-for-termios2.patch
moxa-first-pass-at-termios-reporting.patch
n_tty-clean-up-old-code-to-follow-coding-style-and-mostly-checkpatch.patch
rocket-first-pass-at-termios-reporting.patch
rocket-dont-let-random-users-reset-the-controller.patch
tty_audit-fix-checkpatch-complaint.patch
tty_io-drag-screaming-into-coding-style-compliance.patch
tty_ioctl-drag-screaming-into-compliance-with-the-coding.patch
8250_early-coding-style.patch
8250_gsc-coding-style.patch
8250_hp300-coding-style.patch
8250_hub6-codding-style.patch
8250_pci-coding-style.patch
serial8250-coding-style.patch
8250-enable-rate-reporting-via-termios.patch
serial_core-bring-mostly-into-line-with-coding-style.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
