The patch titled
spi: spi_bfin, rearrange portmux calls
has been removed from the -mm tree. Its filename was
spi-spi_bfin-rearrange-portmux-calls.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: spi: spi_bfin, rearrange portmux calls
From: Sonic Zhang <[EMAIL PROTECTED]>
Move pin muxing to setup and cleanup methods.
Signed-off-by: Sonic Zhang <[EMAIL PROTECTED]>
Signed-off-by: Bryan Wu <[EMAIL PROTECTED]>
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/spi/spi_bfin5xx.c | 53 +++++++++++++++++++-----------------
1 file changed, 28 insertions(+), 25 deletions(-)
diff -puN drivers/spi/spi_bfin5xx.c~spi-spi_bfin-rearrange-portmux-calls
drivers/spi/spi_bfin5xx.c
--- a/drivers/spi/spi_bfin5xx.c~spi-spi_bfin-rearrange-portmux-calls
+++ a/drivers/spi/spi_bfin5xx.c
@@ -136,7 +136,6 @@ struct chip_data {
u16 flag;
u8 chip_select_num;
- u8 chip_select_requested;
u8 n_bytes;
u8 width; /* 0 or 1 */
u8 enable_dma;
@@ -216,19 +215,7 @@ static int restore_state(struct driver_d
{
struct chip_data *chip = drv_data->cur_chip;
int ret = 0;
- u16 ssel[3][MAX_SPI_SSEL] = {
- {P_SPI0_SSEL1, P_SPI0_SSEL2, P_SPI0_SSEL3,
- P_SPI0_SSEL4, P_SPI0_SSEL5,
- P_SPI0_SSEL6, P_SPI0_SSEL7},
-
- {P_SPI1_SSEL1, P_SPI1_SSEL2, P_SPI1_SSEL3,
- P_SPI1_SSEL4, P_SPI1_SSEL5,
- P_SPI1_SSEL6, P_SPI1_SSEL7},
-
- {P_SPI2_SSEL1, P_SPI2_SSEL2, P_SPI2_SSEL3,
- P_SPI2_SSEL4, P_SPI2_SSEL5,
- P_SPI2_SSEL6, P_SPI2_SSEL7},
- };
+
/* Clear status and disable clock */
write_STAT(BIT_STAT_CLR);
bfin_spi_disable(drv_data);
@@ -239,17 +226,6 @@ static int restore_state(struct driver_d
write_BAUD(chip->baud);
cs_active(chip);
- if (!chip->chip_select_requested) {
- int i = chip->chip_select_num;
-
- dev_dbg(&drv_data->pdev->dev, "chip select number is %d\n", i);
- if ((i > 0) && (i <= MAX_SPI_SSEL))
- ret = peripheral_request(
- ssel[drv_data->master->bus_num][i-1], DRV_NAME);
-
- chip->chip_select_requested = 1;
- }
-
if (ret)
dev_dbg(&drv_data->pdev->dev,
": request chip select number %d failed\n",
@@ -983,6 +959,22 @@ static int transfer(struct spi_device *s
return 0;
}
+#define MAX_SPI_SSEL 7
+
+static u16 ssel[3][MAX_SPI_SSEL] = {
+ {P_SPI0_SSEL1, P_SPI0_SSEL2, P_SPI0_SSEL3,
+ P_SPI0_SSEL4, P_SPI0_SSEL5,
+ P_SPI0_SSEL6, P_SPI0_SSEL7},
+
+ {P_SPI1_SSEL1, P_SPI1_SSEL2, P_SPI1_SSEL3,
+ P_SPI1_SSEL4, P_SPI1_SSEL5,
+ P_SPI1_SSEL6, P_SPI1_SSEL7},
+
+ {P_SPI2_SSEL1, P_SPI2_SSEL2, P_SPI2_SSEL3,
+ P_SPI2_SSEL4, P_SPI2_SSEL5,
+ P_SPI2_SSEL6, P_SPI2_SSEL7},
+};
+
/* first setup for new devices */
static int setup(struct spi_device *spi)
{
@@ -1113,6 +1105,12 @@ static int setup(struct spi_device *spi)
spi_set_ctldata(spi, chip);
+ dev_dbg(&spi->dev, "chip select number is %d\n", chip->chip_select_num);
+ if ((chip->chip_select_num > 0)
+ && (chip->chip_select_num <= spi->master->num_chipselect))
+ peripheral_request(ssel[spi->master->bus_num]
+ [chip->chip_select_num-1], DRV_NAME);
+
return 0;
}
@@ -1124,6 +1122,11 @@ static void cleanup(struct spi_device *s
{
struct chip_data *chip = spi_get_ctldata(spi);
+ if ((chip->chip_select_num > 0)
+ && (chip->chip_select_num <= spi->master->num_chipselect))
+ peripheral_free(ssel[spi->master->bus_num]
+ [chip->chip_select_num-1]);
+
kfree(chip);
}
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
origin.patch
libata-set-proper-ata-udma-mode-for-bf548-according-to-system-clock-checkpatch-fixes.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
