The patch titled
mct232: speed, new termios and compliance cleanups
has been removed from the -mm tree. Its filename was
mct232-speed-new-termios-and-compliance-cleanups.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: mct232: speed, new termios and compliance cleanups
From: Alan Cox <[EMAIL PROTECTED]>
Signed-off-by: Alan Cox <[EMAIL PROTECTED]>
Cc: Pete Zaitcev <[EMAIL PROTECTED]>
Cc: Greg KH <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/usb/serial/mct_u232.c | 26 +++++++++++++++++---------
drivers/usb/serial/mct_u232.h | 2 +-
2 files changed, 18 insertions(+), 10 deletions(-)
diff -puN
drivers/usb/serial/mct_u232.c~mct232-speed-new-termios-and-compliance-cleanups
drivers/usb/serial/mct_u232.c
---
a/drivers/usb/serial/mct_u232.c~mct232-speed-new-termios-and-compliance-cleanups
+++ a/drivers/usb/serial/mct_u232.c
@@ -182,10 +182,11 @@ struct mct_u232_private {
/*
* Later day 2.6.0-test kernels have new baud rates like B230400 which
* we do not know how to support. We ignore them for the moment.
- * XXX Rate-limit the error message, it's user triggerable.
*/
-static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t
value)
+static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t
value, speed_t *result)
{
+ *result = value;
+
if (le16_to_cpu(serial->dev->descriptor.idProduct) ==
MCT_U232_SITECOM_PID
|| le16_to_cpu(serial->dev->descriptor.idProduct) ==
MCT_U232_BELKIN_F5U109_PID) {
switch (value) {
@@ -200,11 +201,13 @@ static int mct_u232_calculate_baud_rate(
case 57600: return 0x0b;
case 115200: return 0x0c;
default:
- err("MCT USB-RS232: unsupported baudrate request 0x%x,"
- " using default of B9600", value);
+ *result = 9600;
return 0x08;
}
} else {
+ /* FIXME: Can we use any divider - should we do
+ divider = 115200/value;
+ real baud = 115200/divider */
switch (value) {
case 300: break;
case 600: break;
@@ -217,9 +220,8 @@ static int mct_u232_calculate_baud_rate(
case 57600: break;
case 115200: break;
default:
- err("MCT USB-RS232: unsupported baudrate request 0x%x,"
- " using default of B9600", value);
value = 9600;
+ *result = 9600;
}
return 115200/value;
}
@@ -232,16 +234,19 @@ static int mct_u232_set_baud_rate(struct
int rc;
unsigned char zero_byte = 0;
unsigned char cts_enable_byte = 0;
+ speed_t speed;
- divisor = cpu_to_le32(mct_u232_calculate_baud_rate(serial, value));
+ divisor = cpu_to_le32(mct_u232_calculate_baud_rate(serial, value,
&speed));
rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
MCT_U232_SET_BAUD_RATE_REQUEST,
MCT_U232_SET_REQUEST_TYPE,
0, 0, &divisor, MCT_U232_SET_BAUD_RATE_SIZE,
WDR_TIMEOUT);
- if (rc < 0)
+ if (rc < 0) /*FIXME: What value speed results */
err("Set BAUD RATE %d failed (error = %d)", value, rc);
+ else
+ tty_encode_baud_rate(port->tty, speed, speed);
dbg("set_baud_rate: value: 0x%x, divisor: 0x%x", value, divisor);
/* Mimic the MCT-supplied Windows driver (version 1.21P.0104), which
@@ -608,7 +613,8 @@ static void mct_u232_set_termios (struct
{
struct usb_serial *serial = port->serial;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
- unsigned int cflag = port->tty->termios->c_cflag;
+ struct ktermios *termios = port->tty->termios;
+ unsigned int cflag = termios->c_cflag;
unsigned int old_cflag = old_termios->c_cflag;
unsigned long flags;
unsigned int control_state;
@@ -670,6 +676,8 @@ static void mct_u232_set_termios (struct
break;
}
+ termios->c_cflag &= ~CMSPAR;
+
/* set the number of stop bits */
last_lcr |= (cflag & CSTOPB) ?
MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1;
diff -puN
drivers/usb/serial/mct_u232.h~mct232-speed-new-termios-and-compliance-cleanups
drivers/usb/serial/mct_u232.h
---
a/drivers/usb/serial/mct_u232.h~mct232-speed-new-termios-and-compliance-cleanups
+++ a/drivers/usb/serial/mct_u232.h
@@ -79,7 +79,7 @@
* and "Intel solution". They are the regular MCT and "Sitecom" for us.
* This is pointless to document in the header, see the code for the bits.
*/
-static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t
value);
+static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t
value, speed_t *result);
/*
* Line Control Register (LCR)
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
git-arm.patch
git-libata-all.patch
libata-fix-early-use-of-port-printk-checkpatch-fixes.patch
git-netdev-all.patch
bluetooth-rfcomm-tty_close-before-destruct.patch
pcmcia-convert-some-internal-only-ioaddr_t-to-unsigned-int.patch
pcmcia-replace-kio_addr_t-with-unsigned-int-everywhere.patch
serial-keep-the-dtr-setting-for-serial-console.patch
geode-lists-are-subscriber-only.patch
get-rid-of-nr_open-and-introduce-a-sysctl_nr_open.patch
get-rid-of-nr_open-and-introduce-a-sysctl_nr_open-fix.patch
sc26xx-new-serial-driver-for-sc2681-uarts.patch
sc26xx-new-serial-driver-for-sc2681-uarts-update.patch
documentation-about-unaligned-memory-access.patch
tty-enable-the-echoing-of-c-in-the-n_tty-discipline.patch
tty-enable-the-echoing-of-c-in-the-n_tty-discipline-checkpatch-fixes.patch
tty-kill-tty_flipbuf_size.patch
drivers-edac-turnon-edac-device-error-logging.patch
drivers-edac-use-round_jiffies_relative.patch
drivers-edac-add-cell-xdr-memory-types.patch
drivers-edac-add-cell-mc-driver.patch
drivers-edac-i3000-code-tidying.patch
drivers-edac-i3000-replace-macros-with-functions.patch
drivers-edac-add-freescale-mpc85xx-driver.patch
drivers-edac-add-marvell-mv64x60-driver.patch
drivers-edac-add-marvell-mv64x60-driver-fix.patch
dz-clean-up-and-improve-the-setup-of-termios-settings.patch
char-rocket-switch-long-delay-to-sleep.patch
char-rocket-printk-cleanup.patch
char-char-serial-remove-serial_type_normal-redefines.patch
char-mxser_new-ioaddresses-are-ulong.patch
char-stallion-fix-compiler-warnings.patch
char-riscom8-change-rc_init_drivers-prototype.patch
mxser-mxser_new-first-pass-over-termios-reporting-for-the.patch
tty-let-architectures-override-the-user-kernel-macros.patch
tty-s390-support-for-termios2.patch
moxa-first-pass-at-termios-reporting.patch
n_tty-clean-up-old-code-to-follow-coding-style-and-mostly-checkpatch.patch
rocket-first-pass-at-termios-reporting.patch
rocket-dont-let-random-users-reset-the-controller.patch
tty_audit-fix-checkpatch-complaint.patch
tty_io-drag-screaming-into-coding-style-compliance.patch
tty_ioctl-drag-screaming-into-compliance-with-the-coding.patch
8250_early-coding-style.patch
8250_gsc-coding-style.patch
8250_hp300-coding-style.patch
8250_hub6-codding-style.patch
8250_pci-coding-style.patch
serial8250-coding-style.patch
8250-enable-rate-reporting-via-termios.patch
serial_core-bring-mostly-into-line-with-coding-style.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
