The patch titled
sky2: wake-on-lan configuration issues
has been added to the -mm tree. Its filename is
sky2-wake-on-lan-configuration-issues.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: sky2: wake-on-lan configuration issues
From: Stephen Hemminger <[EMAIL PROTECTED]>
This patch disables config mode access after clearing PCI settings.
Signed-off-by: Stephen Hemminger <[EMAIL PROTECTED]>
Tested-by: supersud501 <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/net/sky2.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff -puN drivers/net/sky2.c~sky2-wake-on-lan-configuration-issues
drivers/net/sky2.c
--- a/drivers/net/sky2.c~sky2-wake-on-lan-configuration-issues
+++ a/drivers/net/sky2.c
@@ -621,6 +621,7 @@ static void sky2_phy_power(struct sky2_h
static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
/* Turn on/off phy power saving */
if (onoff)
@@ -632,7 +633,8 @@ static void sky2_phy_power(struct sky2_h
reg1 |= coma_mode[port];
sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
- reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+ sky2_pci_read32(hw, PCI_DEV_REG1);
udelay(100);
}
@@ -2432,6 +2434,7 @@ static void sky2_hw_intr(struct sky2_hw
if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
u16 pci_err;
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
pci_err = sky2_pci_read16(hw, PCI_STATUS);
if (net_ratelimit())
dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
@@ -2439,12 +2442,14 @@ static void sky2_hw_intr(struct sky2_hw
sky2_pci_write16(hw, PCI_STATUS,
pci_err | PCI_STATUS_ERROR_BITS);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
if (status & Y2_IS_PCI_EXP) {
/* PCI-Express uncorrectable Error occurred */
u32 err;
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
0xfffffffful);
@@ -2452,6 +2457,7 @@ static void sky2_hw_intr(struct sky2_hw
dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
if (status & Y2_HWE_L1_MASK)
@@ -2817,6 +2823,7 @@ static void sky2_reset(struct sky2_hw *h
}
sky2_power_on(hw);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
for (i = 0; i < hw->ports; i++) {
sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
origin.patch
git-input.patch
git-net.patch
git-netdev-all.patch
if-0-pci_cleanup_aer_correct_error_status.patch
git-wireless.patch
bonding-locking-fix.patch
sky2-wake-on-lan-configuration-issues.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
