The patch titled
AT91: correct at91sam9263ek LCD power gpio pin
has been added to the -mm tree. Its filename is
at91-correct-at91sam9263ek-lcd-power-gpio-pin.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: AT91: correct at91sam9263ek LCD power gpio pin
From: Nicolas Ferre <[EMAIL PROTECTED]>
Correct GPIO pin assignment for the LCD power control (PCI)
Signed-off-by: Nicolas Ferre <[EMAIL PROTECTED]>
Cc: David Brownell <[EMAIL PROTECTED]>
Cc: Russell King <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
arch/arm/mach-at91/board-sam9263ek.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff -puN
arch/arm/mach-at91/board-sam9263ek.c~at91-correct-at91sam9263ek-lcd-power-gpio-pin
arch/arm/mach-at91/board-sam9263ek.c
---
a/arch/arm/mach-at91/board-sam9263ek.c~at91-correct-at91sam9263ek-lcd-power-gpio-pin
+++ a/arch/arm/mach-at91/board-sam9263ek.c
@@ -242,10 +242,7 @@ static struct fb_monspecs at91fb_default
static void at91_lcdc_power_control(int on)
{
- if (on)
- at91_set_gpio_value(AT91_PIN_PD12, 0); /* power up */
- else
- at91_set_gpio_value(AT91_PIN_PD12, 1); /* power down */
+ at91_set_gpio_value(AT91_PIN_PA30, on);
}
/* Driver datas */
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
at91-correct-at91sam9263ek-lcd-power-gpio-pin.patch
atmel_lcdfb-backlight-control.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html