The patch titled
atmel_serial: fix bugs in probe() error path and remove()
has been added to the -mm tree. Its filename is
atmel_serial-fix-bugs-in-probe-error-path-and-remove.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: atmel_serial: fix bugs in probe() error path and remove()
From: Haavard Skinnemoen <[EMAIL PROTECTED]>
When an error happens in probe(), the clocks should be disabled, but
only if the port isn't already used as a console.
In remove(), the port struct shouldn't be freed because it's defined
statically.
Signed-off-by: Haavard Skinnemoen <[EMAIL PROTECTED]>
Cc: Andrew Victor <[EMAIL PROTECTED]>
Tested-by: Marc Pignat <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/serial/atmel_serial.c | 39 +++++++++++++++++++++++---------
1 file changed, 29 insertions(+), 10 deletions(-)
diff -puN
drivers/serial/atmel_serial.c~atmel_serial-fix-bugs-in-probe-error-path-and-remove
drivers/serial/atmel_serial.c
---
a/drivers/serial/atmel_serial.c~atmel_serial-fix-bugs-in-probe-error-path-and-remove
+++ a/drivers/serial/atmel_serial.c
@@ -935,8 +935,18 @@ static int __init atmel_late_console_ini
core_initcall(atmel_late_console_init);
+static inline bool atmel_is_console_port(struct uart_port *port)
+{
+ return port->cons && port->cons->index == port->line;
+}
+
#else
#define ATMEL_CONSOLE_DEVICE NULL
+
+static inline bool atmel_is_console_port(struct uart_port *port)
+{
+ return false;
+}
#endif
static struct uart_driver atmel_uart = {
@@ -994,9 +1004,19 @@ static int __devinit atmel_serial_probe(
atmel_init_port(port, pdev);
ret = uart_add_one_port(&atmel_uart, &port->uart);
- if (!ret) {
- device_init_wakeup(&pdev->dev, 1);
- platform_set_drvdata(pdev, port);
+ if (ret)
+ goto err_add_port;
+
+ device_init_wakeup(&pdev->dev, 1);
+ platform_set_drvdata(pdev, port);
+
+ return 0;
+
+err_add_port:
+ if (!atmel_is_console_port(&port->uart)) {
+ clk_disable(port->clk);
+ clk_put(port->clk);
+ port->clk = NULL;
}
return ret;
@@ -1008,16 +1028,15 @@ static int __devexit atmel_serial_remove
struct atmel_uart_port *atmel_port = (struct atmel_uart_port *)port;
int ret = 0;
- clk_disable(atmel_port->clk);
- clk_put(atmel_port->clk);
-
device_init_wakeup(&pdev->dev, 0);
platform_set_drvdata(pdev, NULL);
- if (port) {
- ret = uart_remove_one_port(&atmel_uart, port);
- kfree(port);
- }
+ ret = uart_remove_one_port(&atmel_uart, port);
+
+ /* "port" is allocated statically, so we shouldn't free it */
+
+ clk_disable(atmel_port->clk);
+ clk_put(atmel_port->clk);
return ret;
}
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
git-avr32.patch
fix-timerfd-breakage-on-avr32-was-re-fix-variable-use-in-avr32-pte_alloc_one.patch
git-mtd.patch
gpiolib-add-drivers-gpio-directory.patch
gpiolib-add-gpio-provider-infrastructure.patch
gpiolib-update-documentation-gpiotxt.patch
gpiolib-pxa-platform-support.patch
gpiolib-pcf857x-i2c-gpio-expander-support.patch
gpiolib-mcp23s08-spi-gpio-expander-support.patch
gpiolib-pca9539-i2c-gpio-expander-support.patch
gpiolib-deprecate-obsolete-pca9539-driver.patch
gpiolib-avr32-at32ap-platform-support.patch
config_highpte-vs-sub-page-page-tables-avr32-fix.patch
read_current_time-cleanups.patch
fix-__const_udelay-declaration-and-definition-mismatches.patch
atmel_spi-throughput-improvement.patch
atmel_spi-chain-dma-transfers.patch
atmel_spi-chain-dma-transfers-update.patch
atmel_spi-fix-dmachain-oops-with-debug-enabled.patch
add-have_oprofile.patch
atmel_lcdfb-validate-display-timings.patch
sanitize-the-type-of-struct-useru_ar0.patch
add-cmpxchg_local-to-avr32.patch
tty-let-architectures-override-the-user-kernel-macros.patch
maintainers-add-haavard-as-maintainer-of-the-atmel_serial-driver.patch
atmel_serial-clean-up-the-code.patch
atmel_serial-use-cpu_relax-when-busy-waiting.patch
atmel_serial-use-existing-console-options-only-if-brg-is-running.patch
atmel_serial-fix-bugs-in-probe-error-path-and-remove.patch
atmel_serial-split-the-interrupt-handler.patch
atmel_serial-add-dma-support.patch
atmel_serial-use-container_of-instead-of-direct-cast.patch
atmel_serial-show-tty-name-in-proc-interrupts.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
