The patch titled
uml: borrow const.h techniques
has been removed from the -mm tree. Its filename was
uml-borrow-consth-techniques.patch
This patch was dropped because it was merged into mainline or a subsystem tree
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: uml: borrow const.h techniques
From: Jeff Dike <[EMAIL PROTECTED]>
Suggested by Geert Uytterhoeven - use const.h to get constants that are usable
in both C and assembly. I can't include it directly since this code can't
include kernel headers. const.h is also for numeric constants that can be
typed by tacking a "UL" or similar on the end. The constants here have to be
typed by casting them.
So, the relevant parts of const.h are copied here and modified in order to
allow the constants to be uncasted in assembly and casted in C.
Signed-off-by: Jeff Dike <[EMAIL PROTECTED]>
Cc: Geert Uytterhoeven <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
arch/um/include/as-layout.h | 34 +++++++++++++++++++++-------------
arch/um/sys-i386/stub.S | 8 ++++----
arch/um/sys-x86_64/stub.S | 8 ++++----
3 files changed, 29 insertions(+), 21 deletions(-)
diff -puN arch/um/include/as-layout.h~uml-borrow-consth-techniques
arch/um/include/as-layout.h
--- a/arch/um/include/as-layout.h~uml-borrow-consth-techniques
+++ a/arch/um/include/as-layout.h
@@ -10,23 +10,31 @@
#include "kern_constants.h"
/*
- * Assembly doesn't want any casting, but C does, so define these
- * without casts here, and define new symbols with casts inside the C
- * section.
+ * Stolen from linux/const.h, which can't be directly included since
+ * this is used in userspace code, which has no access to the kernel
+ * headers. Changed to be suitable for adding casts to the start,
+ * rather than "UL" to the end.
*/
-#define ASM_STUB_CODE (UML_CONFIG_TOP_ADDR - 2 * UM_KERN_PAGE_SIZE)
-#define ASM_STUB_DATA (UML_CONFIG_TOP_ADDR - UM_KERN_PAGE_SIZE)
-#define ASM_STUB_START ASM_STUB_CODE
-/*
- * This file is included by the assembly stubs, which just want the
- * definitions above.
+/* Some constant macros are used in both assembler and
+ * C code. Therefore we cannot annotate them always with
+ * 'UL' and other type specifiers unilaterally. We
+ * use the following macros to deal with this.
*/
-#ifndef __ASSEMBLY__
-#define STUB_CODE ((unsigned long) ASM_STUB_CODE)
-#define STUB_DATA ((unsigned long) ASM_STUB_DATA)
-#define STUB_START ((unsigned long) ASM_STUB_START)
+#ifdef __ASSEMBLY__
+#define _AC(X, Y) (Y)
+#else
+#define __AC(X, Y) (X (Y))
+#define _AC(X, Y) __AC(X, Y)
+#endif
+
+#define STUB_CODE _AC((unsigned long), \
+ UML_CONFIG_TOP_ADDR - 2 * UM_KERN_PAGE_SIZE)
+#define STUB_DATA _AC((unsigned long), UML_CONFIG_TOP_ADDR - UM_KERN_PAGE_SIZE)
+#define STUB_START _AC(, STUB_CODE)
+
+#ifndef __ASSEMBLY__
#include "sysdep/ptrace.h"
diff -puN arch/um/sys-i386/stub.S~uml-borrow-consth-techniques
arch/um/sys-i386/stub.S
--- a/arch/um/sys-i386/stub.S~uml-borrow-consth-techniques
+++ a/arch/um/sys-i386/stub.S
@@ -7,7 +7,7 @@
.globl batch_syscall_stub
batch_syscall_stub:
/* load pointer to first operation */
- mov $(ASM_STUB_DATA+8), %esp
+ mov $(STUB_DATA+8), %esp
again:
/* load length of additional data */
@@ -15,12 +15,12 @@ again:
/* if(length == 0) : end of list */
/* write possible 0 to header */
- mov %eax, ASM_STUB_DATA+4
+ mov %eax, STUB_DATA+4
cmpl $0, %eax
jz done
/* save current pointer */
- mov %esp, ASM_STUB_DATA+4
+ mov %esp, STUB_DATA+4
/* skip additional data */
add %eax, %esp
@@ -46,7 +46,7 @@ again:
done:
/* save return value */
- mov %eax, ASM_STUB_DATA
+ mov %eax, STUB_DATA
/* stop */
int3
diff -puN arch/um/sys-x86_64/stub.S~uml-borrow-consth-techniques
arch/um/sys-x86_64/stub.S
--- a/arch/um/sys-x86_64/stub.S~uml-borrow-consth-techniques
+++ a/arch/um/sys-x86_64/stub.S
@@ -8,18 +8,18 @@ syscall_stub:
/* We don't have 64-bit constants, so this constructs the address
* we need.
*/
- movq $(ASM_STUB_DATA >> 32), %rbx
+ movq $(STUB_DATA >> 32), %rbx
salq $32, %rbx
- movq $(ASM_STUB_DATA & 0xffffffff), %rcx
+ movq $(STUB_DATA & 0xffffffff), %rcx
or %rcx, %rbx
movq %rax, (%rbx)
int3
.globl batch_syscall_stub
batch_syscall_stub:
- mov $(ASM_STUB_DATA >> 32), %rbx
+ mov $(STUB_DATA >> 32), %rbx
sal $32, %rbx
- mov $(ASM_STUB_DATA & 0xffffffff), %rax
+ mov $(STUB_DATA & 0xffffffff), %rax
or %rax, %rbx
/* load pointer to first operation */
mov %rbx, %rsp
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
origin.patch
git-kvm.patch
fix-__const_udelay-declaration-and-definition-mismatches.patch
iget-stop-hostfs-from-using-iget-and-read_inode.patch
iget-stop-hostfs-from-using-iget-and-read_inode-checkpatch-fixes.patch
aout-suppress-aout-library-support-if-config_arch_supports_aout-uml-re-remove-accidentally-restored-code.patch
random-add-async-notification-support-to-dev-random.patch
mount-options-fix-hostfs.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
