The patch titled
serial: avoid stalling suspend if serial port won't drain
has been removed from the -mm tree. Its filename was
serial-avoid-stalling-suspend-if-serial-port-wont-drain.patch
This patch was dropped because it was merged into mainline or a subsystem tree
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: serial: avoid stalling suspend if serial port won't drain
From: Russell King <[EMAIL PROTECTED]>
Some ports seem to be unable to drain their transmitters on shut down. Such a
problem can occur if the port is programmed for hardware imposed flow control,
characters are in the FIFO but the CTS signal is inactive.
Normally, this isn't a problem because most places where we wait for the
transmitter to drain have a time-out. However, there is no timeout in the
suspend path.
Give a port 30ms to drain; this is an arbitary value chosen to avoid long
delays if there are many such ports in the system, while giving a reasonable
chance for a single port to drain. Should a port not drain within this
timeout, issue a warning.
Signed-off-by: Russell King <[EMAIL PROTECTED]>
Acked-by: Alan Cox <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/serial/serial_core.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff -puN
drivers/serial/serial_core.c~serial-avoid-stalling-suspend-if-serial-port-wont-drain
drivers/serial/serial_core.c
---
a/drivers/serial/serial_core.c~serial-avoid-stalling-suspend-if-serial-port-wont-drain
+++ a/drivers/serial/serial_core.c
@@ -1977,6 +1977,7 @@ int uart_suspend_port(struct uart_driver
if (state->info && state->info->flags & UIF_INITIALIZED) {
const struct uart_ops *ops = port->ops;
+ int tries;
state->info->flags = (state->info->flags & ~UIF_INITIALIZED)
| UIF_SUSPENDED;
@@ -1990,9 +1991,14 @@ int uart_suspend_port(struct uart_driver
/*
* Wait for the transmitter to empty.
*/
- while (!ops->tx_empty(port)) {
+ for (tries = 3; !ops->tx_empty(port) && tries; tries--) {
msleep(10);
}
+ if (!tries)
+ printk(KERN_ERR "%s%s%s%d: Unable to drain
transmitter\n",
+ port->dev ? port->dev->bus_id : "",
+ port->dev ? ": " : "",
+ drv->dev_name, port->line);
ops->shutdown(port);
}
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
origin.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
