The patch titled
     spi_bfin: wait for tx to complete on full duplex paths
has been removed from the -mm tree.  Its filename was
     spi_bfin-wait-for-tx-to-complete-on-full-duplex-paths.patch

This patch was dropped because it was merged into mainline or a subsystem tree

The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/

------------------------------------------------------
Subject: spi_bfin: wait for tx to complete on full duplex paths
From: Bryan Wu <[EMAIL PROTECTED]>

Full duplex SPI operation should not read a dummy byte at the first transfer. 
Bug and fix by Jean-Christian de Rivaz <[EMAIL PROTECTED]>:

http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3678

Signed-off-by: Jean-Christian de Rivaz <[EMAIL PROTECTED]>
Signed-off-by: Bryan Wu <[EMAIL PROTECTED]>
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---

 drivers/spi/spi_bfin5xx.c |   18 +++---------------
 1 file changed, 3 insertions(+), 15 deletions(-)

diff -puN 
drivers/spi/spi_bfin5xx.c~spi_bfin-wait-for-tx-to-complete-on-full-duplex-paths 
drivers/spi/spi_bfin5xx.c
--- 
a/drivers/spi/spi_bfin5xx.c~spi_bfin-wait-for-tx-to-complete-on-full-duplex-paths
+++ a/drivers/spi/spi_bfin5xx.c
@@ -358,14 +358,10 @@ static void u8_cs_chg_reader(struct driv
 
 static void u8_duplex(struct driver_data *drv_data)
 {
-       /* poll for SPI completion before start */
-       while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
-               cpu_relax();
-
        /* in duplex mode, clk is triggered by writing of TDBR */
        while (drv_data->rx < drv_data->rx_end) {
                write_TDBR(drv_data, (*(u8 *) (drv_data->tx)));
-               while (read_STAT(drv_data) & BIT_STAT_TXS)
+               while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
                        cpu_relax();
                while (!(read_STAT(drv_data) & BIT_STAT_RXS))
                        cpu_relax();
@@ -495,14 +491,10 @@ static void u16_cs_chg_reader(struct dri
 
 static void u16_duplex(struct driver_data *drv_data)
 {
-       /* poll for SPI completion before start */
-       while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
-               cpu_relax();
-
        /* in duplex mode, clk is triggered by writing of TDBR */
        while (drv_data->tx < drv_data->tx_end) {
                write_TDBR(drv_data, (*(u16 *) (drv_data->tx)));
-               while (read_STAT(drv_data) & BIT_STAT_TXS)
+               while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
                        cpu_relax();
                while (!(read_STAT(drv_data) & BIT_STAT_RXS))
                        cpu_relax();
@@ -516,15 +508,11 @@ static void u16_cs_chg_duplex(struct dri
 {
        struct chip_data *chip = drv_data->cur_chip;
 
-       /* poll for SPI completion before start */
-       while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
-               cpu_relax();
-
        while (drv_data->tx < drv_data->tx_end) {
                cs_active(drv_data, chip);
 
                write_TDBR(drv_data, (*(u16 *) (drv_data->tx)));
-               while (read_STAT(drv_data) & BIT_STAT_TXS)
+               while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
                        cpu_relax();
                while (!(read_STAT(drv_data) & BIT_STAT_RXS))
                        cpu_relax();
_

Patches currently in -mm which might be from [EMAIL PROTECTED] are

origin.patch
git-mtd.patch
blackfin-serial-driver-this-driver-enable-sports-on-blackfin-emulate-uart.patch
git-watchdog.patch
sanitize-the-type-of-struct-useru_ar0.patch
add-cmpxchg_local-to-blackfin-replace-__cmpxchg-by-generic-cmpxchg.patch
d_path-make-d_path-use-a-struct-path.patch
d_path-make-d_path-use-a-struct-path-fix.patch
procfs-constify-function-pointer-tables.patch

-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to