The patch titled
cpufreq: change cpu freq tables to per_cpu variables
has been added to the -mm tree. Its filename is
cpufreq-change-cpu-freq-tables-to-per_cpu-variables.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: cpufreq: change cpu freq tables to per_cpu variables
From: Mike Travis <[EMAIL PROTECTED]>
Change cpu frequency tables from arrays to per_cpu variables.
Cc: Dave Jones <[EMAIL PROTECTED]>
Signed-off-by: Mike Travis <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/cpufreq/cpufreq_userspace.c | 70 +++++++++++++-------------
1 file changed, 37 insertions(+), 33 deletions(-)
diff -puN
drivers/cpufreq/cpufreq_userspace.c~cpufreq-change-cpu-freq-tables-to-per_cpu-variables
drivers/cpufreq/cpufreq_userspace.c
---
a/drivers/cpufreq/cpufreq_userspace.c~cpufreq-change-cpu-freq-tables-to-per_cpu-variables
+++ a/drivers/cpufreq/cpufreq_userspace.c
@@ -30,11 +30,11 @@
/**
* A few values needed by the userspace governor
*/
-static unsigned int cpu_max_freq[NR_CPUS];
-static unsigned int cpu_min_freq[NR_CPUS];
-static unsigned int cpu_cur_freq[NR_CPUS]; /* current CPU freq */
-static unsigned int cpu_set_freq[NR_CPUS]; /* CPU freq desired by userspace
*/
-static unsigned int cpu_is_managed[NR_CPUS];
+DEFINE_PER_CPU(int, cpu_max_freq);
+DEFINE_PER_CPU(int, cpu_min_freq);
+DEFINE_PER_CPU(int, cpu_cur_freq); /* current CPU freq */
+DEFINE_PER_CPU(int, cpu_set_freq); /* CPU freq desired by userspace */
+DEFINE_PER_CPU(int, cpu_is_managed);
static DEFINE_MUTEX (userspace_mutex);
static int cpus_using_userspace_governor;
@@ -48,12 +48,12 @@ userspace_cpufreq_notifier(struct notifi
{
struct cpufreq_freqs *freq = data;
- if (!cpu_is_managed[freq->cpu])
+ if (!per_cpu(cpu_is_managed, freq->cpu))
return 0;
dprintk("saving cpu_cur_freq of cpu %u to be %u kHz\n",
freq->cpu, freq->new);
- cpu_cur_freq[freq->cpu] = freq->new;
+ per_cpu(cpu_cur_freq, freq->cpu) = freq->new;
return 0;
}
@@ -77,15 +77,15 @@ static int cpufreq_set(struct cpufreq_po
dprintk("cpufreq_set for cpu %u, freq %u kHz\n", policy->cpu, freq);
mutex_lock(&userspace_mutex);
- if (!cpu_is_managed[policy->cpu])
+ if (!per_cpu(cpu_is_managed, policy->cpu))
goto err;
- cpu_set_freq[policy->cpu] = freq;
+ per_cpu(cpu_set_freq, policy->cpu) = freq;
- if (freq < cpu_min_freq[policy->cpu])
- freq = cpu_min_freq[policy->cpu];
- if (freq > cpu_max_freq[policy->cpu])
- freq = cpu_max_freq[policy->cpu];
+ if (freq < per_cpu(cpu_min_freq, policy->cpu))
+ freq = per_cpu(cpu_min_freq, policy->cpu);
+ if (freq > per_cpu(cpu_max_freq, policy->cpu))
+ freq = per_cpu(cpu_max_freq, policy->cpu);
/*
* We're safe from concurrent calls to ->target() here
@@ -101,10 +101,9 @@ static int cpufreq_set(struct cpufreq_po
return ret;
}
-
static ssize_t show_speed(struct cpufreq_policy *policy, char *buf)
{
- return sprintf(buf, "%u\n", cpu_cur_freq[policy->cpu]);
+ return sprintf (buf, "%u\n", per_cpu(cpu_cur_freq, policy->cpu));
}
static int cpufreq_governor_userspace(struct cpufreq_policy *policy,
@@ -127,13 +126,16 @@ static int cpufreq_governor_userspace(st
}
cpus_using_userspace_governor++;
- cpu_is_managed[cpu] = 1;
- cpu_min_freq[cpu] = policy->min;
- cpu_max_freq[cpu] = policy->max;
- cpu_cur_freq[cpu] = policy->cur;
- cpu_set_freq[cpu] = policy->cur;
- dprintk("managing cpu %u started (%u - %u kHz, currently %u
kHz)\n", cpu, cpu_min_freq[cpu], cpu_max_freq[cpu], cpu_cur_freq[cpu]);
-
+ per_cpu(cpu_is_managed, cpu) = 1;
+ per_cpu(cpu_min_freq, cpu) = policy->min;
+ per_cpu(cpu_max_freq, cpu) = policy->max;
+ per_cpu(cpu_cur_freq, cpu) = policy->cur;
+ per_cpu(cpu_set_freq, cpu) = policy->cur;
+ dprintk("managing cpu %u started "
+ "(%u - %u kHz, currently %u kHz)\n", cpu,
+ per_cpu(cpu_min_freq, cpu),
+ per_cpu(cpu_max_freq, cpu),
+ per_cpu(cpu_cur_freq, cpu));
mutex_unlock(&userspace_mutex);
break;
case CPUFREQ_GOV_STOP:
@@ -145,10 +147,10 @@ static int cpufreq_governor_userspace(st
CPUFREQ_TRANSITION_NOTIFIER);
}
- cpu_is_managed[cpu] = 0;
- cpu_min_freq[cpu] = 0;
- cpu_max_freq[cpu] = 0;
- cpu_set_freq[cpu] = 0;
+ per_cpu(cpu_is_managed, cpu) = 0;
+ per_cpu(cpu_min_freq, cpu) = 0;
+ per_cpu(cpu_max_freq, cpu) = 0;
+ per_cpu(cpu_set_freq, cpu) = 0;
dprintk("managing cpu %u stopped\n", cpu);
mutex_unlock(&userspace_mutex);
break;
@@ -157,22 +159,24 @@ static int cpufreq_governor_userspace(st
dprintk("limit event for cpu %u: %u - %u kHz,"
"currently %u kHz, last set to %u kHz\n",
cpu, policy->min, policy->max,
- cpu_cur_freq[cpu], cpu_set_freq[cpu]);
- if (policy->max < cpu_set_freq[cpu]) {
+ per_cpu(cpu_cur_freq, cpu),
+ per_cpu(cpu_set_freq, cpu));
+ if (policy->max < per_cpu(cpu_set_freq, cpu)) {
__cpufreq_driver_target(policy, policy->max,
CPUFREQ_RELATION_H);
}
- else if (policy->min > cpu_set_freq[cpu]) {
+ else if (policy->min > per_cpu(cpu_set_freq, cpu)) {
__cpufreq_driver_target(policy, policy->min,
CPUFREQ_RELATION_L);
}
else {
- __cpufreq_driver_target(policy, cpu_set_freq[cpu],
+ __cpufreq_driver_target(policy,
+ per_cpu(cpu_set_freq, cpu),
CPUFREQ_RELATION_L);
}
- cpu_min_freq[cpu] = policy->min;
- cpu_max_freq[cpu] = policy->max;
- cpu_cur_freq[cpu] = policy->cur;
+ per_cpu(cpu_min_freq, cpu) = policy->min;
+ per_cpu(cpu_max_freq, cpu) = policy->max;
+ per_cpu(cpu_cur_freq, cpu) = policy->cur;
mutex_unlock(&userspace_mutex);
break;
}
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
origin.patch
cpufreq-change-cpu-freq-tables-to-per_cpu-variables.patch
oprofile-change-cpu_buffer-from-array-to-per_cpu-variable.patch
x86-minor-cleanup-of-comments-in-processorh.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
