Hmm, 'Windows has made corrections to the file system' does indicate
that at least something went wrong.
The error about ui_language is in a completely different part of the
code. Since the errors you get seem to be quite varied, it indicates
that something really weird is going on.
Please send me your deck in the problematic state. If it's too big,
you can use some website like yousendit. Also include config and
config.py.
I'll try to get to the bottom of this!
Cheers,
Peter
Quoting "Henrik in Oslo" <[email protected]>:
Hi Pete
1) Ran check disk + fix combined. MS haven't made it easy to interpret
results. See attached photos (Chck_disk01 and 02). As far as I understand:
Nothing wrong with disk. I have never experienced anything that could be
disk-related problems when running non-mnemosyne programs
2) Installed mnemosyne-20120416-setup.exe. Similar problem as with 2.0-RC1.
See attachment "Uncaught exception 07". No mnem-program started.
3) Installed mnemosyne-beta-11b-setup.exe. Again: "Uncaught exception 07".
No mnem-program started.
4.a) Installed mnemosyne-2.0-RC1-setup.exe
4.b) Restored learning DB to version before activating tag E_1_65 (thank
you for great functionality dropbox). See attached Mnem_after_restore.
5) Mnemosyne starts again without error messages.
My lay analysis points to a main suspect: txt import.
My DB is 8 MB. Still want it? Attached to mail to [email protected]?
/ Henrik
On Saturday, 12 May 2012 18:09:57 UTC+2, Peter Bienstman wrote:
Hi Henrik,
Since one of your error messages contains 'disk IO error', I'm a bit
afraid that you are suffering from hard drive issues. Did you run a disk
check as I recommended earlier?
In case, I suggest you take a backup of your Mnemosyne data as soon a
possible to a different location for safety.
Feel free to mail me your deck, so that I can see if I can reproduce your
isses.
Downgrading your install to beta 11b should pose no inherent problems. It
would be interesting to see if the issues persist.
Good luck!
Peter
On Saturday 12 May 2012 08:32:12 Henrik in Oslo wrote:
Hi Peter, sorry for the poor communication. Below are some more details:
I've been using 2.0-RC1 since 9th May (W7/64) and reported some issues.
My Mnem db consist of 7500 cards. Today I had approx 160 cards scheduled
for repetition ("homework"), let us call it Learning Session 1. I
experienced some (2-3?) "uncaught exception" error messages during Learning
Session 1. I have become used to this occurring so I did not make a note of
card-type etc., just clicked "ok" and continued.
Yesterday I had imported approx 70 txt cards, all as "Front to back" only,
but not yet memorised these cards. Some of these cards intentionally
contained <br> for lineshift, that is the only particualarity I can think
of. All the txt-imported cards had their own tag= E_1_65. E_1_65 was NOT
part of Learning Session 1.
After completion of Learning Session 1 I wanted to go on to Learning
Session 2: learn the recently created E_1_65. I "ticked off" E_1_65 for
learning and the "not memorised"-counter (as expected) increased from 0 to
approx 70.
During Learning Session 2 the "uncaught exception" error messages (see #04
and #05) appeared for approx every 3rd card, I clicked "ok" and continued.
Then (after about 10 cards?) the "uncaught exception" error message #06
appeared and it all stopped, Mnemosyne did not respond.
Neither restart of Mnemosyne nor restart of PC did the trick. Trying to
start Mnemosyne, the "uncaught exception" error message #06 appeared, but
no Mnemosyne program started running.
From http://users.ugent.be/~pbienst/pub/ I then reloaded ver 2.0-RC1.
Same result. Only the "uncaught exception" error message #06 appeared, no
program.
Do you have a hint for a workaround solution until 2.0 stabilised? Can I
"go down" to e.g. mnemosyne-20120416 (17-Apr-2012)?
PS during Learning Session 1 I seem to remember "falling out" of
Mnemosyne", but thinking I had hit un unfortunate combination of keys or
similar, I just restarted and continued without major problems.
/ Henrik
On Saturday, 12 May 2012 13:16:53 UTC+2, Peter Bienstman wrote:
Thanks for the feedback, but 'doing homework' is a bit too unspecific
for me to reproduce. Can you tell me exactly what you were doing and
what the card was?
If it was an old cloze card, please recreate it first.
What do you mean with 'door has closed'?
Cheers,
Peter
Quoting "Henrik in Oslo" <[email protected]>:
> #04 and #05 when "doing homework" #06 when door had closed
>
> Win7/ 64. 2.0-RC1 since 9th May.
>
> --
> You received this message because you are subscribed to the Google
> Groups "mnemosyne-proj-users" group.
> To view this discussion on the web visit
> https://groups.google.com/d/msg/mnemosyne-proj-users/-/Y8ZWdOAn7T8J.
> To post to this group, send email to
[email protected].
> To unsubscribe from this group, send email to
> [email protected].
> For more options, visit this group at
> http://groups.google.com/group/mnemosyne-proj-users?hl=en.
>
>
--
You received this message because you are subscribed to the Google Groups
"mnemosyne-proj-users" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/mnemosyne-proj-users/-/0vaEaI4a_hkJ.
To post to this group, send email to [email protected]
.
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/mnemosyne-proj-users?hl=en.
--
Peter Bienstman
Ghent University, Dept. of Information Technology
Sint-Pietersnieuwstraat 41, B-9000 Gent, Belgium
tel: +32 9 264 34 46, fax: +32 9 264 35 93
WWW: http://photonics.intec.UGent.be
email: [email protected]
--
You received this message because you are subscribed to the Google
Groups "mnemosyne-proj-users" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/mnemosyne-proj-users/-/G9OTiNIXWF0J.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/mnemosyne-proj-users?hl=en.
--
You received this message because you are subscribed to the Google Groups
"mnemosyne-proj-users" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/mnemosyne-proj-users?hl=en.
