Hi, Il 27.06.2015 12:54 Thomas Schäfer ha scritto:
It doesn't work for me.
I've got E3372h-153 with firmware 21.180.01.00.00. Is this the same of your key? Please note that E3372s and E3372h use different chips... They are similar only on the outside.
Kernel 3.16.
I'm using 3.18, but it seems that there are no changes in the relevant files between 3.16 and 3.18 (or 4.1)...
I get the LED to light "connected", I get the IP-address via dhcp (the DNS not) and ping 8.8.8.8 is not possible.
Hmmm... This is strange. Can you try pinging for a while? Maybe it's the "packet burst" problem happening with 6000 too... Or maybe try traceroute or wget too, mobile networks could do strange things to packets (at least they do here in Italy... :/ ). Also, please note that ncm works for me only when connected to an LTE network, and only ppp works when connected to a 3G network; if I use ncm to connect to 3g, the same behaviour of yours appears. But please note that I haven't tested 3G extensively. Also I don't know the behaviour on Windows, maybe the mobile partner chooses ppp or ncm based on the network type?
apn is set correctly via cgdcont ndisdup works on /dev/ttyUSB0 and /dev/cdc-wdm0 on /dev/ttyUSB1 it has no effect.
Exactly, it must be sent via the PCUI port, or the cdc-wdm0 (but it seems not to be entirely reliable with this modem... The PCUI port always works for me instead.) Best, Vittorio _______________________________________________ ModemManager-devel mailing list ModemManager-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
