On Wed, Sep 2, 2015 at 4:53 PM, Highland, Glenn <glenn.highl...@digi.com> wrote: > > Aleksander suggested that I propose the change below to the mailing list. > > Essentially we're encountering a problem with SMS notifications not being > received > by the application from ModemManager v1.4.6 (and v1.4.10 for that matter). > This > is using a Telit HE910-D that has two USB endpoints (in our case ttyACM0 and > ttyACM3). > > The Telit HE910-D needs to be configured with the AT+CNMI=2,1,2,1,0 command on > both the primary and secondary ports as confirmed by Telit Support. Currently > that command is performed only on the primary port, which is reserved for PPP > I/O after connection to the provider network. The secondary port's New > Message Indication configuration remains at 0,0,0,0 which (in summary) causes > the modem to discard inbound messages without storing them. Hence > ModemManager > does not get notified of a newly-received SMS. > > Does an update to mm-broadband-modem.c seem reasonable to everyone?
The specific suggestion I'm doing is to run the CNMI settings command in both the primary and the secondary ports for all AT-based modems, not just in the primary port - but don't fail the operation if setting it in the secondary port fails (e.g. for the case where secondary port is a very limited or not-fully-functional AT interpreter). -- Aleksander https://aleksander.es _______________________________________________ ModemManager-devel mailing list ModemManager-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
