On Thu, 2016-09-15 at 18:57 +0200, Stefan Eichenberger wrote: > The ME909u-512 does theoretically support the DHCP feature over AT > but if > this is done right after the NDISDUP command, it seems that the > firmware > has some trouble with it because the firmware will not attach the > Ethernet header afterwards. This can be seen by doing a tcpdump while > pinging e.g. 8.8.8.8. The request has a size of 98 Bytes, while the > replies only have a size of 84 Bytes. The first 14 Bytes are missing > which is exactly the size of the Ethernet header. > > To reproduce this issue, I've tried the command sequence manually: > mmcli -m 0 --command 'AT^NDISDUP=1,1,"gprs.swisscom.ch"' > mmcli -m 0 --command "AT+CREG?" > mmcli -m 0 --command "AT^NDISSTATQRY?" > mmcli -m 0 --command "AT+CGREG?" > mmcli -m 0 --command "AT^DHCP?" > > The error appears in with this sequence > > mmcli -m 0 --command 'AT^NDISDUP=1,1,"gprs.swisscom.ch"' > mmcli -m 0 --command "AT+CREG?" > mmcli -m 0 --command "AT^NDISSTATQRY?" > mmcli -m 0 --command "AT+CGREG?"
Have you tested out how long the firmware needs before it can take the AT^DHCP without problems? Dan > The error does not appear in this sequence > > This commit applies to 1.6.0 and adds a udev option for this modem, > which disables the DHCP over AT command feature. > > Signed-off-by: Stefan Eichenberger <[email protected] > > > --- > plugins/huawei/77-mm-huawei-net-port-types.rules | 3 ++ > plugins/huawei/mm-broadband-bearer-huawei.c | 50 > ++++++++++++++++++------ > 2 files changed, 42 insertions(+), 11 deletions(-) > > diff --git a/plugins/huawei/77-mm-huawei-net-port-types.rules > b/plugins/huawei/77-mm-huawei-net-port-types.rules > index f60f1f8..d35f2d5 100644 > --- a/plugins/huawei/77-mm-huawei-net-port-types.rules > +++ b/plugins/huawei/77-mm-huawei-net-port-types.rules > @@ -6,6 +6,9 @@ ENV{ID_VENDOR_ID}!="12d1", > GOTO="mm_huawei_port_types_end" > # MU609 does not support getportmode (crashes modem with default > firmware) > ATTRS{idProduct}=="1573", ENV{ID_MM_HUAWEI_DISABLE_GETPORTMODE}="1" > > +# MU909u does not support DHCP properly, it can happen that the > Ethernet frames do not attach the Ethernet header afterwards. > +ATTRS{idProduct}=="1573", ENV{ID_MM_HUAWEI_DISABLE_DHCP}="1" > + > # Mark the modem and at port flags for ModemManager > SUBSYSTEMS=="usb", ATTRS{bInterfaceClass}=="ff", > ATTRS{bInterfaceSubClass}=="01", ATTRS{bInterfaceProtocol}=="01", > ENV{ID_MM_HUAWEI_MODEM_PORT}="1" > SUBSYSTEMS=="usb", ATTRS{bInterfaceClass}=="ff", > ATTRS{bInterfaceSubClass}=="01", ATTRS{bInterfaceProtocol}=="02", > ENV{ID_MM_HUAWEI_AT_PORT}="1" > diff --git a/plugins/huawei/mm-broadband-bearer-huawei.c > b/plugins/huawei/mm-broadband-bearer-huawei.c > index 60a91e5..11782c3 100644 > --- a/plugins/huawei/mm-broadband-bearer-huawei.c > +++ b/plugins/huawei/mm-broadband-bearer-huawei.c > @@ -465,17 +465,34 @@ connect_3gpp_context_step (Connect3gppContext > *ctx) > g_object_ref (ctx->self)); > return; > > - case CONNECT_3GPP_CONTEXT_STEP_IP_CONFIG: > - mm_base_modem_at_command_full (ctx->modem, > - ctx->primary, > - "^DHCP?", > - 3, > - FALSE, > - FALSE, > - NULL, > - (GAsyncReadyCallback)connect_ > dhcp_check_ready, > - g_object_ref (ctx->self)); > - return; > + case CONNECT_3GPP_CONTEXT_STEP_IP_CONFIG: { > + GUdevClient *client; > + GUdevDevice *data_device; > + > + // ME909u has a problem with DHCP over AT. If it's done > right after NDSIDUP > + // the modem doesn't send the Ethernet header anymore which > confuses the network stack > + client = g_udev_client_new (NULL); > + data_device = (g_udev_client_query_by_subsystem_and_name ( > + client, > + "tty", > + mm_port_get_device (&ctx->primary- > >parent.parent))); > + if (!data_device || !g_udev_device_get_property_as_boolean > (data_device, "ID_MM_HUAWEI_DISABLE_DHCP")) { > + mm_base_modem_at_command_full (ctx->modem, > + ctx->primary, > + "^DHCP?", > + 3, > + FALSE, > + FALSE, > + NULL, > + (GAsyncReadyCallback)conn > ect_dhcp_check_ready, > + g_object_ref (ctx- > >self)); > + return; > + } > + > + mm_info("This device (%s) does not support DHCP over AT", > mm_port_get_device (ctx->data)); > + ctx->step ++; > + /* Fall down to the next step */ > + } > > case CONNECT_3GPP_CONTEXT_STEP_LAST: > /* Clear context */ > @@ -489,6 +506,17 @@ connect_3gpp_context_step (Connect3gppContext > *ctx) > mm_bearer_connect_result_new (ctx->data, ctx- > >ipv4_config, NULL), > (GDestroyNotify)mm_bearer_connect_result_unref); > } > + else { > + MMBearerIpConfig *ipv4_config; > + > + ipv4_config = mm_bearer_ip_config_new (); > + mm_bearer_ip_config_set_method (ipv4_config, > MM_BEARER_IP_METHOD_DHCP); > + g_simple_async_result_set_op_res_gpointer ( > + ctx->result, > + mm_bearer_connect_result_new (ctx->data, > ipv4_config, NULL), > + (GDestroyNotify)mm_bearer_connect_result_unref); > + g_object_unref (ipv4_config); > + } > } > > connect_3gpp_context_complete_and_free (ctx); _______________________________________________ ModemManager-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
