At this point i have no idea why cdc_mbim doen't grab the device.
Just that it is loaded but i think it is just loaded by cdc_ncm
dependencies.
On 19.09.2016 22:03, Bjørn Mork wrote:
Harald Jung <harald.j...@ecos.de> writes:
echo "03f0 521d" > /sys/bus/usb/drivers/cdc_mbim/new_id
had no effect
And it should not. The driver will match the MBIM class.
usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0
usbcore: registered new interface driver cdc_ncm
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver cdc_mbim
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=02 Prot=01 MxPS=64 #Cfgs= 2
P: Vendor=03f0 ProdID=521d Rev=00.01
S: Manufacturer=Hewlett-Packard
S: Product=HP hs3110 HSPA+ Mobile Broadband Device
C: #Ifs= 3 Cfg#= 2 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=05 Driver=option
The cdc_mbim driver should at least try to bind to the two first
interfaces. Don't you see any other messages from it in the log?
Bjørn
_______________________________________________
ModemManager-devel mailing list
ModemManager-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel