Ohh... as per
https://lists.freedesktop.org/archives/modemmanager-devel/2016-August/003338.html,
mmcli talks just to ModemManager.

So, as long as ModemManager does not mix up "external requests from mmcli"
and "internally generated requests", I guess we are fine on this front.

On Mon, Oct 17, 2016 at 11:35 PM, Ajay Garg <ajaygargn...@gmail.com> wrote:

> I tried switching to Direct-IP mode, and ALL mmcli-commands (including *mmcli
> -m 0 --set-allowed-modes='2G'*) work fine from mmcli itself (without
> using any AT-commands as such).
>
>
> a)
> Is this expected behaviour?
>
> b)
> Now, since qmi-proxy is no more there, there are chances of interminglings
> due to working of ModemManager and mmcli together, right?
>
> On Mon, Oct 17, 2016 at 8:48 PM, Aleksander Morgado <
> aleksan...@aleksander.es> wrote:
>
>> On Mon, Oct 17, 2016 at 5:10 PM, Ajay Garg <ajaygargn...@gmail.com>
>> wrote:
>> > :O :O :O :O
>> >
>> > Of course I switched it to QMI.
>> > The previous unit that I did all the tests on, ran perfect when
>> switched to
>> > QMI mode.
>> >
>> > Your reply suggests that some functionalities (like switching to
>> > 2G-only-mode) would not work in Direct-IP mode.
>> > If so, Direct-IP would not serve our purpose.
>> >
>>
>> No, I didn't say that. Switching to 2G mode should be ok in Direct IP
>> mode, using AT commands.
>>
>> > I am in the process of retrieving the "ati" output of the earlier-modem
>> (on
>> > which things worked perfect in QMI-mode).
>> > That could probably help in determining if some firmware-mismatch is
>> causing
>> > any issue.
>> >
>> >
>> > But Aleksander, this is really bad news.
>> > Any idea what might have made things working in the earlier-modem in
>> QMI?
>>
>> I have no idea; was it a MC8090 as well?
>>
>> --
>> Aleksander
>> https://aleksander.es
>>
>
>
>
> --
> Regards,
> Ajay
>



-- 
Regards,
Ajay
_______________________________________________
ModemManager-devel mailing list
ModemManager-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel

Reply via email to