On 2017-02-06 09:20 AM, Adam Sherman wrote: > Output of mmcli shows ports: 'ttyUSB0 (qcdm), ttyUSB2 (at), cdc-wdm0 > (qmi), wwp0s20u4i8 (net)'.
After adding the udev rules, mmcli shows ports: 'ttyUSB0 (unknown), ttyUSB1 (unknown), ttyUSB2 (unknown), cdc-wdm0 (qmi), wwp0s20u4i8 (net)'. Notable is the addition of ttyUSB1. > Then I should issue the AT commands to ttyUSB2. Going to test this right > away. I didn't even need to issue any AT commands: # echo \$GPS_START > /dev/ttyUSB1 # gpscat /dev/ttyUSB1 Produces NMEA strings. So I'm off to wire up gpsd, next. A. -- Adam Sherman <[email protected]> _______________________________________________ ModemManager-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
