On Thu, 2017-06-08 at 23:57 +0200, Dominik Strnad wrote: > Hello Dan, > > thank you for help. > > > On Thu, Jun 8, 2017 at 11:44 PM, Dan Williams <[email protected]> > wrote: > > > On Thu, 2017-06-08 at 22:56 +0200, Aleksander Morgado wrote: > > > Hey, > > > > > > > > > > > so my card is not listed in rfkill at all: > > > > > > > > litin@x220:~$ rfkill list all > > > > 0: hci0: Bluetooth > > > > Soft blocked: no > > > > Hard blocked: no > > > > 1: tpacpi_bluetooth_sw: Bluetooth > > > > Soft blocked: no > > > > Hard blocked: no > > > > 2: phy0: Wireless LAN > > > > Soft blocked: no > > > > Hard blocked: no > > > > > > > > And I have no idea why.... So I would not say that card is > > > > blocked > > > > by > > > > rfkill, because it seem to be not registered to rfkill at > > > > all...the > > > > fun is, > > > > > > Hum, ok... no idea :/ > > > > Can we run "AT!PCINFO?" on the AT port? The LPM force flags might > > give > > more information about whether it's image mismatch or W_DISABLE. > > > > If it is W_DISABLE you might be able to AT!PCOFFEN=2 and make it > > ignore > > the BIOS rfkill state. > > > > Dan > > > > > Port /dev/ttyUSB2, 23:54:06 > > Press CTRL-A Z for help on special keys > > AT!PCINFO? > > State: Low Power Mode > LPM voters - Temp:0, Volt:0, User:0, W_DISABLE:1, IMSWITCH:0, BIOS:0, > LWM2M:0, 0 > LPM pe
Yeah, the PCOFFEN is a command from older, pre-Gobi devices. Not surprised it doesn't work here, but at least PCINFO does. It's not an FW image configuration mismatch, otherwise you'd see IMSWITCH:1. The device *does* think it's being told to LPM from the card pins. So you'll need to solve that, how I don't know. You said you already taped pins on the card, did those include W_DISABLE? Dan AT!PCOFFEN=2 > > ERROR > AT!PCOFFEN=0 > > ERROR > AT!PCOFFEN=1 > > AT!PCOFFEN=2 > > > > ERROR > > > So it seem it is W_DISABLE, but the AT command do not work... :-o > > > > > > > > that it seem to be registered twice in kernel: > > > > > > > > litin@x220:~$ dmesg | grep qmi > > > > [ 3.247730] qmi_wwan 2-1.4:1.8: cdc-wdm0: USB WDM device > > > > [ 3.262419] qmi_wwan 2-1.4:1.8 wwan0: register 'qmi_wwan' at > > > > usb-0000:00:1d.0-1.4, WWAN/QMI device, 86:43:0f:24:2c:93 > > > > [ 3.267585] qmi_wwan 2-1.4:1.10: cdc-wdm1: USB WDM device > > > > [ 3.268927] qmi_wwan 2-1.4:1.10 wwan1: register 'qmi_wwan' > > > > at > > > > usb-0000:00:1d.0-1.4, WWAN/QMI device, 86:43:0f:24:2c:93 > > > > [ 3.269028] usbcore: registered new interface driver > > > > qmi_wwan > > > > [ 3.695620] qmi_wwan 2-1.4:1.10 wwp0s29u1u4i10: renamed from > > > > wwan1 > > > > [ 3.734681] qmi_wwan 2-1.4:1.8 wwp0s29u1u4i8: renamed from > > > > wwan0 > > > > > > > > > > That is normal; the modem is exposing two QMI+WWAN pairs, one > > > from > > > if#8 and another one from if#10. > > > > > > > > > > > litin@x220:~$ lsusb > > > > Bus 002 Device 003: ID 1199:9071 Sierra Wireless, Inc. > > > > Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate > > > > Matching Hub > > > > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > > > Bus 001 Device 006: ID 04f2:b217 Chicony Electronics Co., Ltd > > > > Lenovo > > > > Integrated Camera (0.3MP) > > > > Bus 001 Device 010: ID 10d5:55a4 Uni Class Technology Co., Ltd > > > > Bus 001 Device 009: ID 046d:c52b Logitech, Inc. Unifying > > > > Receiver > > > > Bus 001 Device 008: ID 046d:c31c Logitech, Inc. Keyboard K120 > > > > Bus 001 Device 007: ID 058f:9254 Alcor Micro Corp. Hub > > > > Bus 001 Device 005: ID 17ef:100a Lenovo ThinkPad Mini Dock Plus > > > > Series 3 > > > > Bus 001 Device 004: ID 0a5c:217f Broadcom Corp. BCM2045B (BDC- > > > > 2.1) > > > > Bus 001 Device 003: ID 147e:2016 Upek Biometric > > > > Touchchip/Touchstrip > > > > Fingerprint Sensor > > > > Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate > > > > Matching Hub > > > > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > > > > > > > > > > > litin@x220:~$ lsusb -v > > > > > > > > Bus 002 Device 003: ID 1199:9071 Sierra Wireless, Inc. > > > > Couldn't open device, some information will be missing > > > > Device Descriptor: > > > > bLength 18 > > > > bDescriptorType 1 > > > > bcdUSB 2.10 > > > > bDeviceClass 0 (Defined at Interface level) > > > > bDeviceSubClass 0 > > > > bDeviceProtocol 0 > > > > bMaxPacketSize0 64 > > > > idVendor 0x1199 Sierra Wireless, Inc. > > > > idProduct 0x9071 > > > > bcdDevice 0.06 > > > > iManufacturer 1 > > > > iProduct 2 > > > > iSerial 3 > > > > bNumConfigurations 1 > > > > Configuration Descriptor: > > > > bLength 9 > > > > bDescriptorType 2 > > > > wTotalLength 190 > > > > bNumInterfaces 5 > > > > bConfigurationValue 1 > > > > iConfiguration 0 > > > > bmAttributes 0xa0 > > > > (Bus Powered) > > > > Remote Wakeup > > > > MaxPower 500mA > > > > Interface Descriptor: > > > > bLength 9 > > > > bDescriptorType 4 > > > > bInterfaceNumber 0 > > > > bAlternateSetting 0 > > > > bNumEndpoints 2 > > > > bInterfaceClass 255 Vendor Specific Class > > > > bInterfaceSubClass 255 Vendor Specific Subclass > > > > bInterfaceProtocol 255 Vendor Specific Protocol > > > > iInterface 0 > > > > Endpoint Descriptor: > > > > bLength 7 > > > > bDescriptorType 5 > > > > bEndpointAddress 0x81 EP 1 IN > > > > bmAttributes 2 > > > > Transfer Type Bulk > > > > Synch Type None > > > > Usage Type Data > > > > wMaxPacketSize 0x0200 1x 512 bytes > > > > bInterval 0 > > > > Endpoint Descriptor: > > > > bLength 7 > > > > bDescriptorType 5 > > > > bEndpointAddress 0x01 EP 1 OUT > > > > bmAttributes 2 > > > > Transfer Type Bulk > > > > Synch Type None > > > > Usage Type Data > > > > wMaxPacketSize 0x0200 1x 512 bytes > > > > bInterval 0 > > > > Interface Descriptor: > > > > bLength 9 > > > > bDescriptorType 4 > > > > bInterfaceNumber 2 > > > > bAlternateSetting 0 > > > > bNumEndpoints 3 > > > > bInterfaceClass 255 Vendor Specific Class > > > > bInterfaceSubClass 0 > > > > bInterfaceProtocol 0 > > > > iInterface 0 > > > > ** UNRECOGNIZED: 05 24 00 10 01 > > > > ** UNRECOGNIZED: 05 24 01 00 00 > > > > ** UNRECOGNIZED: 04 24 02 02 > > > > ** UNRECOGNIZED: 05 24 06 00 00 > > > > Endpoint Descriptor: > > > > bLength 7 > > > > bDescriptorType 5 > > > > bEndpointAddress 0x83 EP 3 IN > > > > bmAttributes 3 > > > > Transfer Type Interrupt > > > > Synch Type None > > > > Usage Type Data > > > > wMaxPacketSize 0x000a 1x 10 bytes > > > > bInterval 9 > > > > Endpoint Descriptor: > > > > bLength 7 > > > > bDescriptorType 5 > > > > bEndpointAddress 0x82 EP 2 IN > > > > bmAttributes 2 > > > > Transfer Type Bulk > > > > Synch Type None > > > > Usage Type Data > > > > wMaxPacketSize 0x0200 1x 512 bytes > > > > bInterval 0 > > > > Endpoint Descriptor: > > > > bLength 7 > > > > bDescriptorType 5 > > > > bEndpointAddress 0x02 EP 2 OUT > > > > bmAttributes 2 > > > > Transfer Type Bulk > > > > Synch Type None > > > > Usage Type Data > > > > wMaxPacketSize 0x0200 1x 512 bytes > > > > bInterval 0 > > > > Interface Descriptor: > > > > bLength 9 > > > > bDescriptorType 4 > > > > bInterfaceNumber 3 > > > > bAlternateSetting 0 > > > > bNumEndpoints 3 > > > > bInterfaceClass 255 Vendor Specific Class > > > > bInterfaceSubClass 0 > > > > bInterfaceProtocol 0 > > > > iInterface 0 > > > > ** UNRECOGNIZED: 05 24 00 10 01 > > > > ** UNRECOGNIZED: 05 24 01 00 00 > > > > ** UNRECOGNIZED: 04 24 02 02 > > > > ** UNRECOGNIZED: 05 24 06 00 00 > > > > Endpoint Descriptor: > > > > bLength 7 > > > > bDescriptorType 5 > > > > bEndpointAddress 0x85 EP 5 IN > > > > bmAttributes 3 > > > > Transfer Type Interrupt > > > > Synch Type None > > > > Usage Type Data > > > > wMaxPacketSize 0x000a 1x 10 bytes > > > > bInterval 9 > > > > Endpoint Descriptor: > > > > bLength 7 > > > > bDescriptorType 5 > > > > bEndpointAddress 0x84 EP 4 IN > > > > bmAttributes 2 > > > > Transfer Type Bulk > > > > Synch Type None > > > > Usage Type Data > > > > wMaxPacketSize 0x0200 1x 512 bytes > > > > bInterval 0 > > > > Endpoint Descriptor: > > > > bLength 7 > > > > bDescriptorType 5 > > > > bEndpointAddress 0x03 EP 3 OUT > > > > bmAttributes 2 > > > > Transfer Type Bulk > > > > Synch Type None > > > > Usage Type Data > > > > wMaxPacketSize 0x0200 1x 512 bytes > > > > bInterval 0 > > > > Interface Descriptor: > > > > bLength 9 > > > > bDescriptorType 4 > > > > bInterfaceNumber 8 > > > > bAlternateSetting 0 > > > > bNumEndpoints 3 > > > > bInterfaceClass 255 Vendor Specific Class > > > > bInterfaceSubClass 255 Vendor Specific Subclass > > > > bInterfaceProtocol 255 Vendor Specific Protocol > > > > iInterface 0 > > > > Endpoint Descriptor: > > > > bLength 7 > > > > bDescriptorType 5 > > > > bEndpointAddress 0x87 EP 7 IN > > > > bmAttributes 3 > > > > Transfer Type Interrupt > > > > Synch Type None > > > > Usage Type Data > > > > wMaxPacketSize 0x0008 1x 8 bytes > > > > bInterval 9 > > > > Endpoint Descriptor: > > > > bLength 7 > > > > bDescriptorType 5 > > > > bEndpointAddress 0x86 EP 6 IN > > > > bmAttributes 2 > > > > Transfer Type Bulk > > > > Synch Type None > > > > Usage Type Data > > > > wMaxPacketSize 0x0200 1x 512 bytes > > > > bInterval 0 > > > > Endpoint Descriptor: > > > > bLength 7 > > > > bDescriptorType 5 > > > > bEndpointAddress 0x04 EP 4 OUT > > > > bmAttributes 2 > > > > Transfer Type Bulk > > > > Synch Type None > > > > Usage Type Data > > > > wMaxPacketSize 0x0200 1x 512 bytes > > > > bInterval 0 > > > > Interface Descriptor: > > > > bLength 9 > > > > bDescriptorType 4 > > > > bInterfaceNumber 10 > > > > bAlternateSetting 0 > > > > bNumEndpoints 3 > > > > bInterfaceClass 255 Vendor Specific Class > > > > bInterfaceSubClass 255 Vendor Specific Subclass > > > > bInterfaceProtocol 255 Vendor Specific Protocol > > > > iInterface 0 > > > > Endpoint Descriptor: > > > > bLength 7 > > > > bDescriptorType 5 > > > > bEndpointAddress 0x89 EP 9 IN > > > > bmAttributes 3 > > > > Transfer Type Interrupt > > > > Synch Type None > > > > Usage Type Data > > > > wMaxPacketSize 0x0008 1x 8 bytes > > > > bInterval 9 > > > > Endpoint Descriptor: > > > > bLength 7 > > > > bDescriptorType 5 > > > > bEndpointAddress 0x88 EP 8 IN > > > > bmAttributes 2 > > > > Transfer Type Bulk > > > > Synch Type None > > > > Usage Type Data > > > > wMaxPacketSize 0x0200 1x 512 bytes > > > > bInterval 0 > > > > Endpoint Descriptor: > > > > bLength 7 > > > > bDescriptorType 5 > > > > bEndpointAddress 0x05 EP 5 OUT > > > > bmAttributes 2 > > > > Transfer Type Bulk > > > > Synch Type None > > > > Usage Type Data > > > > wMaxPacketSize 0x0200 1x 512 bytes > > > > bInterval 0 > > > > > > > > > > > > > > > > And that: Couldn't open device, some information will be > > > > missing > > > > seems to be > > > > intriguing. > > > > > > > > > > You should have run it as root :) > > > > > > > > > > > > > I did recently change modem in my Lenovo X220 > > > > > > > > > > running > > > > > > > > > > Ubuntu 16.04 > > > > > > > > > > to > > > > > > > > > > MC7455 I bought from Farnell. I did add Aleksander > > > > > > > > > > PPA > > > > > > > > > > for > > > > > > > > > > ModemManager on > > > > > > > > > > Xenial: https://launchpad.net/~aleksander-m to get > > > > > > > > > > newer version > > > > > > > > > > on > > > > > > > > > > MM, > > > > > > > > > > which should hopefully support my modem. > > > > > > > > > > Unfortunately > > > > > > > > > > I found > > > > > > > > > > that > > > > > > > > > > bug > > > > > > > > > > which prevents MM sending FCC auth for MC7455 is > > > > > > > > > > still > > > > > > > > > > included in > > > > > > > > > > code in > > > > > > > > > > MM 1.6.4 release: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://cgit.freedesktop.org/ModemManager/ModemMana > > > > > > > > > > ger/ > > > > > > > > > > commit/?id=21f315f6d554b93e4f098cfd0e94c484a8a0c5dc > > > > > > > > > > > > > > > > > > > > I tried to backport given fix into MM source > > > > > > > > > > package > > > > > > > > > > for 1.6.4 on > > > > > > > > > > PPA > > > > > > > > > > but even I did so, I am not able to correctly pass > > > > > > > > > > FCC > > > > > > > > > > auth ( > > > > > > > > > > whole > > > > > > > > > > MM debug > > > > > > > > > > is attached). May I please kindly ask Aleksander, > > > > > > > > > > would > > > > > > > > > > it be > > > > > > > > > > possible > > > > > > > > > > to update your PPA to MM 1.6.6 so I can try my > > > > > > > > > > modem > > > > > > > > > > with latest > > > > > > > > > > MM > > > > > > > > > > version? > > > > > > > > > > (maybe there is something else needed to get my > > > > > > > > > > modem > > > > > > > > > > to work > > > > > > > > > > correctly) > > > > > > > > > > Thank you so much. > > > > > > > > > > > > > > > > > > > > > > > > > > > > I don't think FCC auth is your problem, you're > > > > > > > > > getting a > > > > > > > > > "NoEffect" > > > > > > > > > error > > > > > > > > > and that means there is no need to send FCC auth: > > > > > > > > > ModemManager[2748]: <debug> [1496072816.201321] > > > > > > > > > [mm-broadband-modem-qmi.c:3024] > > > > > > > > > dms_set_fcc_authentication_ready(): > > > > > > > > > Couldn't > > > > > > > > > set FCC authentication: QMI protocol error (26): > > > > > > > > > 'NoEffect' > > > > > > > > > > > > > > > > > > > > > > > > > > > > - I used Sierra flash tool under windows to flash > > > > > > > > > > latest FW and > > > > > > > > > > install > > > > > > > > > > drivers under Windows7 as I read some reports about > > > > > > > > > > images problem > > > > > > > > > > with card > > > > > > > > > > but without any efect. > > > > > > > > > > > > > > > > > > > > > > > > > > > > Oh, you should have used qmi-firmware-update, it > > > > > > > > > works > > > > > > > > > very well ;) > > > > > > > > > > > > > > > > > > > > > > > > Could you please check that I didn't mess fw images > > > > > > > > anyhow? > > > > > > > > Is the > > > > > > > > lsit > > > > > > > > in > > > > > > > > the MM debug ok? I read about similar problem where it > > > > > > > > was > > > > > > > > caused by > > > > > > > > some > > > > > > > > disagreement between fw and setting on the card... > > > > > > > > > > > > > > > > > > > > > > This is the response for "DMS List Stored Images": > > > > > > > > > > > > > > { [0] = '[ type = 'modem' maximum_images = '4' > > > > > > > index_of_running_image > > > > > > > = '4' sublist = '{ [0] = '[ storage_index = '1' > > > > > > > failure_count > > > > > > > = '0' > > > > > > > unique_id = '{ [0] = '63 ' [1] = '95 ' [2] = '63 ' [3] = > > > > > > > '0 ' > > > > > > > [4] = '0 > > > > > > > ' [5] = '0 ' [6] = '0 ' [7] = '0 ' [8] = '0 ' [9] = '0 ' > > > > > > > [10] > > > > > > > = '0 ' > > > > > > > [11] = '0 ' [12] = '0 ' [13] = '0 ' [14] = '0 ' [15] = '0 > > > > > > > '}' > > > > > > > build_id > > > > > > > = '02.08.02.00_?' ] ' [1] = '[ storage_index = '2' > > > > > > > failure_count = '0' > > > > > > > unique_id = '{ [0] = '63 ' [1] = '95 ' [2] = '63 ' [3] = > > > > > > > '0 ' > > > > > > > [4] = '0 > > > > > > > ' [5] = '0 ' [6] = '0 ' [7] = '0 ' [8] = '0 ' [9] = '0 ' > > > > > > > [10] > > > > > > > = '0 ' > > > > > > > [11] = '0 ' [12] = '0 ' [13] = '0 ' [14] = '0 ' [15] = '0 > > > > > > > '}' > > > > > > > build_id > > > > > > > = '02.05.07.00_?' ] ' [2] = '[ storage_index = '3' > > > > > > > failure_count = '0' > > > > > > > unique_id = '{ [0] = '63 ' [1] = '95 ' [2] = '63 ' [3] = > > > > > > > '0 ' > > > > > > > [4] = '0 > > > > > > > ' [5] = '0 ' [6] = '0 ' [7] = '0 ' [8] = '0 ' [9] = '0 ' > > > > > > > [10] > > > > > > > = '0 ' > > > > > > > [11] = '0 ' [12] = '0 ' [13] = '0 ' [14] = '0 ' [15] = '0 > > > > > > > '}' > > > > > > > build_id > > > > > > > = '02.14.03.02_?' ] ' [3] = '[ storage_index = '4' fail > > > > > > > ure_count = '0' unique_id = '{ [0] = '63 ' [1] = '95 ' > > > > > > > [2] = > > > > > > > '63 ' > > > > > > > [3] = '0 ' [4] = '0 ' [5] = '0 ' [6] = '0 ' [7] = '0 ' > > > > > > > [8] = > > > > > > > '0 ' [9] > > > > > > > = '0 ' [10] = '0 ' [11] = '0 ' [12] = '0 ' [13] = '0 ' > > > > > > > [14] = > > > > > > > '0 ' > > > > > > > [15] = '0 '}' build_id = '02.24.03.00_?' ] '}' ] ' [1] = > > > > > > > '[ > > > > > > > type = > > > > > > > 'pri' maximum_images = '50' index_of_running_image = '1' > > > > > > > sublist = '{ > > > > > > > [0] = '[ storage_index = '255' failure_count = '255' > > > > > > > unique_id = '{ > > > > > > > [0] = '48 ' [1] = '48 ' [2] = '50 ' [3] = '46 ' [4] = '48 > > > > > > > ' > > > > > > > [5] = '48 > > > > > > > ' [6] = '57 ' [7] = '95 ' [8] = '48 ' [9] = '48 ' [10] = > > > > > > > '49 > > > > > > > ' [11] = > > > > > > > '0 ' [12] = '0 ' [13] = '0 ' [14] = '0 ' [15] = '0 '}' > > > > > > > build_id = > > > > > > > '02.08.02.00_ATT' ] ' [1] = '[ storage_index = '255' > > > > > > > failure_count = > > > > > > > '255' unique_id = '{ [0] = '48 ' [1] = '48 ' [2] = '50 ' > > > > > > > [3] > > > > > > > = '46 ' > > > > > > > [4] = '48 ' [5] = '50 ' [6] = '49 ' [7] = '95 ' [8] = '48 > > > > > > > ' > > > > > > > [9] = '48 > > > > > > > ' [10] = '48 ' [11] = '0 ' [12] = '0 ' [13] = '0 ' [14] = > > > > > > > '0 > > > > > > > ' [15] = > > > > > > > '0 '}' build_id = '02.24.03.00_GENERIC' ] ' [2] = '[ > > > > > > > storage_index = > > > > > > > '255' failure_count = '255' > > > > > > > unique_id = '{ [0] = '48 ' [1] = '48 ' [2] = '50 ' [3] > > > > > > > = > > > > > > > '46 ' [4] = > > > > > > > '48 ' [5] = '49 ' [6] = '50 ' [7] = '95 ' [8] = '48 ' [9] > > > > > > > = > > > > > > > '48 ' [10] > > > > > > > = '49 ' [11] = '0 ' [12] = '0 ' [13] = '0 ' [14] = '0 ' > > > > > > > [15] > > > > > > > = '0 '}' > > > > > > > build_id = '02.14.03.02_SPRINT' ] ' [3] = '[ > > > > > > > storage_index = > > > > > > > '255' > > > > > > > failure_count = '255' unique_id = '{ [0] = '48 ' [1] = > > > > > > > '48 ' > > > > > > > [2] = '49 > > > > > > > ' [3] = '46 ' [4] = '48 ' [5] = '48 ' [6] = '48 ' [7] = > > > > > > > '95 ' > > > > > > > [8] = > > > > > > > '48 ' [9] = '48 ' [10] = '48 ' [11] = '0 ' [12] = '0 ' > > > > > > > [13] = > > > > > > > '0 ' > > > > > > > [14] = '0 ' [15] = '0 '}' build_id = > > > > > > > '00.00.00.00_OEMPRI918' > > > > > > > ] ' [4] = > > > > > > > '[ storage_index = '255' failure_count = '255' unique_id > > > > > > > = '{ > > > > > > > [0] = > > > > > > > '48 ' [1] = '48 ' [2] = '50 ' [3] = '46 ' [4] = '48 ' [5] > > > > > > > = > > > > > > > '48 ' [6] > > > > > > > = '56 ' [7] = '95 ' [8] = '48 ' [9] = '48 ' [10] = '51 ' > > > > > > > [11] > > > > > > > = '0 ' > > > > > > > [12] = '0 ' [13] = '0 ' [14] = '0 ' [15] = '0 '}' > > > > > > > build_id = > > > > > > > '02.05.07.00_VERIZON' ] '}' ] '} > > > > > > > > > > > > > > Interestingly, if I'm reading this properly, you may be > > > > > > > using > > > > > > > the > > > > > > > wrong modem+PRI image pair: seems to me you're using > > > > > > > modem > > > > > > > image > > > > > > > '02.24.03.00_?' and PRI image '02.08.02.00_ATT'; although > > > > > > > I > > > > > > > cannot > > > > > > > totally confirm that due to issues in Sierra devices like > > > > > > > this one: > > > > > > > https://forum.sierrawireless.com/viewtopic.php?f=117&t=10 > > > > > > > 198 > > > > > > > > > > > > > > You could try to play a bit with the qmi-firmware-update > > > > > > > tool > > > > > > > and see > > > > > > > if you can flash and run an exact modem+PRI pair, just to > > > > > > > make sure > > > > > > > that's not the issue. > > > > > > > > > > > > > > > > > > That is interesting, I think I read somewhere thread about > > > > > > MC7455 not > > > > > > coming > > > > > > from low power mode because of FW/PRI images mismatch. I > > > > > > know > > > > > > that you > > > > > > suggested me to use qmi-firmware-update tool, but I still > > > > > > have > > > > > > old hdd > > > > > > with > > > > > > original win7 somewhere. What I did was to download Generic > > > > > > SWI9X30C_02.24.03.00 as win exe from here: > > > > > > > > > > > > > > > > > > https://source.sierrawireless.com/resources/airprime/minica > > > > > > rd/7 > > > > > > 4xx/airprime-em_mc74xx-approved-fw-packages/ > > > > > > > > > > > > and then I used that windows tool to flash the card. It is > > > > > > said > > > > > > there > > > > > > that: > > > > > > For Windows use the Windows EXE Download This will update > > > > > > both > > > > > > the PRI > > > > > > (carrier provisioning file) and the firmware. I hope that > > > > > > card > > > > > > should > > > > > > not be > > > > > > locked and therefore I used generic FW/PRI pair. I also > > > > > > installed the > > > > > > drivers on win7 but I never used the card under it. > > > > > > Honestly I > > > > > > do not > > > > > > even > > > > > > know how to configure it under windows. :-) > > > > > > > > > > > > Reading your comment about PRI to be AT&T, do you suggest > > > > > > to > > > > > > flash card > > > > > > again to AT&T SWI9X30C_02.20.03.00 instead generic pair? > > > > > > > > > > > > > > > > Both PRI and Modem images from the EXE you run are installed; > > > > > but > > > > > what > > > > > I'm not sure is whether the "index of the running image" is > > > > > the > > > > > correct one or not. Firmware versions > 02.14 (IIRC) have > > > > > this > > > > > issue > > > > > with the "index of running image". > > > > > > > > > > Could you run this commands and send back the output? > > > > > > > > > > $ qmicli -d /dev/cdc-wdm0 -p --dms-swi-get-current-firmware > > > > > $ qmicli -d /dev/cdc-wdm0 -p --dms-get-firmware-preference > > > > > > > > > > > > litin@x220:~$ sudo qmicli -d /dev/cdc-wdm0 -p --dms-swi-get- > > > > current-firmware > > > > [/dev/cdc-wdm0] Successfully retrieved current firmware: > > > > Model: MC7455 > > > > Boot version: SWI9X30C_02.24.03.00 > > > > AMSS version: SWI9X30C_02.24.03.00 > > > > SKU ID: 1102476 > > > > Package ID: unknown > > > > Carrier ID: 1 > > > > Config version: 002.021_000 > > > > litin@x220:~$ sudo qmicli -d /dev/cdc-wdm0 -p --dms-get- > > > > firmware- > > > > preference > > > > firmware preference successfully retrieved: > > > > [image 0] > > > > Image type: 'modem' > > > > Unique ID: '002.021_000' > > > > Build ID: '02.24.03.00_GENERIC' > > > > [image 1] > > > > Image type: 'pri' > > > > Unique ID: '002.021_000' > > > > Build ID: '02.24.03.00_GENERIC' > > > > litin@x220:~$ > > > > > > > > > > > > so to me it seems to be ok..... > > > > > > > > > > Yeah, these all look good. > > > _______________________________________________ ModemManager-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
