On 25/07/17 13:05, Carlo Lobrano wrote: > I can't reproduce this issue. I see the ATZ command, but I still receive > each QSS notification.
OK. Do you have separate data and command ports? Is so, then perhaps the reason which you can't reproduce the issue is that the ATZ command only acts locally on the AT command interpreter for the port which its issued on... If you enable sim hot swap notification on an aux/command port, and the ATZ is issued to the data port, then sim hot swap will still be enabled on the aux port. If you only have a single port (which is the case with the modem I'm testing with - unless I use CMUX mode), and hot swap notification has been enabled, then issuing ATZ on that port will turn off hot swap notification. Cheers, Tim. -- South East Open Source Solutions Limited Registered in England and Wales with company number 06134732. Registered Office: 2 Powell Gardens, Redhill, Surrey, RH1 1TQ VAT number: 900 6633 53 http://seoss.co.uk/ +44-(0)1273-808309 _______________________________________________ ModemManager-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
