Good day,
I’m using an MC7430 which supports LTE B28, but mmcli is not showing eutran-28
as an available band. What could be the issue?
-------------------------
Bands | supported: 'utran-1, utran-6, utran-5, utran-8, utran-9,
eutran-1, eutran-3, eutran-5, eutran-7, eutran-8, eutran-18, eutran-19,
eutran-21, eutran-38, eutran-39, eutran-40, eutran-41, utran-19'
| current: 'utran-1, utran-6, utran-5, utran-8, utran-9,
eutran-1, eutran-3, eutran-5, eutran-7, eutran-8, eutran-18, eutran-19,
eutran-21, eutran-38, eutran-39, eutran-40, eutran-41'
————————————
The modem certainly connects to B28, as seen here:
root@OpenWrt:~# mmcli -m 0 --command="AT!GSTATUS?"
response: '!GSTATUS:
Current Time: 243 Temperature: 47
Reset Counter: 2 Mode: ONLINE
System mode: LTE PS state: Attached
—> LTE band: B28 <— LTE bw: 20 MHz
LTE Rx chan: 9410 LTE Tx chan: 27410
LTE CA state: INACTIVE LTE Scell band:B3
LTE Scell bw:20 MHz LTE Scell chan:1300
EMM state: Registered Normal Service
RRC state: RRC Connected
IMS reg state: No Srv
Best,
Nicholas
_______________________________________________
ModemManager-devel mailing list
ModemManager-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
