Hi Aleksander,
Unfortunately I never got around to trying this before the loan dev kit
had to be returned.
Regards,
Brendan.
------------------------------------------------------------------------
On 16/5/19 1:42 am, Aleksander Morgado wrote:
> Hey Brendan,
>
> Looking at the tags we set, we're just ignoring the ports we don't
> want to use or we don't support, but we're not explicitly specifying
> the purpose of each of the ports:
>
> # LARA-R2 port types
> # ttyACM0 (if #0): primary
> # ttyACM1 (if #2): secondary
> # ttyACM2 (if #4): tertiary
> # ttyACM3 (if #6): GNSS Tunneling (ignore)
> # ttyACM4 (if #8): SIM Access Profile (ignore)
> # ttyACM5 (if #10): Primary Log for diagnostics (ignore)
> ATTRS{idVendor}=="1546", ATTRS{idProduct}=="110a",
> ENV{.MM_USBIFNUM}=="06", ENV{ID_MM_PORT_IGNORE}="1"
> ATTRS{idVendor}=="1546", ATTRS{idProduct}=="110a",
> ENV{.MM_USBIFNUM}=="08", ENV{ID_MM_PORT_IGNORE}="1"
> ATTRS{idVendor}=="1546", ATTRS{idProduct}=="110a",
> ENV{.MM_USBIFNUM}=="0a", ENV{ID_MM_PORT_IGNORE}="1"
>
> Could you try whether flagging ttyACM0 as primary, ttyACM1 as data,
> and ttyACM2 as ignored helps?
>
> E.g., something like this in /lib/udev/rules.d/77-mm-ublox-port-types.rules:
> ATTRS{idVendor}=="1546", ATTRS{idProduct}=="110a",
> ENV{.MM_USBIFNUM}=="06", ENV{ID_MM_PORT_TYPE_AT_PRIMARY}="1"
> ATTRS{idVendor}=="1546", ATTRS{idProduct}=="110a",
> ENV{.MM_USBIFNUM}=="08", ENV{ID_MM_PORT_TYPE_AT_PPP}="1"
> ATTRS{idVendor}=="1546", ATTRS{idProduct}=="110a",
> ENV{.MM_USBIFNUM}=="0a", ENV{ID_MM_PORT_IGNORE}="1"
>
> Once you have added the rules in the file, run "sudo udevadm control
> --reload && sudo udevadm trigger", or reboot the system.
>
------------------------------------------------------------------------
_______________________________________________
ModemManager-devel mailing list
ModemManager-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
