On Sat, 16 May 2020 09:18:46 +0200 Aleksander Morgado <aleksan...@aleksander.es> wrote:
> Hey! > > > > > > root@localhost:~# mmcli -b 2 > > > > > -------------------------------- > > > > > General | dbus path: > > > > > /org/freedesktop/ModemManager1/Bearer/2 > > > > > | type: default > > > > > -------------------------------- > > > > > Status | connected: yes > > > > > | suspended: no > > > > > | interface: wwan0 > > > > > | ip timeout: 20 > > > > > -------------------------------- > > > > > Properties | roaming: allowed > > > > > -------------------------------- > > > > > IPv4 configuration | method: dhcp > > > > > > > > This is the issue here. It shouldn't say DHCP, it should say > > > > "static", because the WWAN network interface of all the new 5G > > > > modules are always in raw-ip instead of 802.3, and therefore MM > > > > should fallback to request static IP addressing instead of DHCP. > > > > > > > > Please try to backport the following fix: > > > > https://gitlab.freedesktop.org/mobile-broadband/ModemManager/-/commit/a8fd33ebaa80a0844c375fdb39173736d18f71cb > > > > > > > > I really haven't spent much time backporting 5G related fixes > > > > to the 1.12 branch, because they will all be released together > > > > in 1.14 soon. > > > > > > > > > > I found it easier to switch my own setup to use the libqmi master > > > branch and modemmanager from the commit you mentioned. It works > > > just fine so far, wwan0 gets the correct address and the modem > > > can ping fine now. > > > > > > I attached the makefiles and patches I used for my openwrt build > > > if anyone needs them. In order to build the master branch, I also > > > needed to add > > > > > > https://github.com/autoconf-archive/autoconf-archive > > > > > > as a build dependency. > > > > > > > > > > > > I have another quick question about modemmanager support for the > > Quectel RM500Q. The commit a8fd33ebaa80a0844c375fdb39173736d18f71cb > > on the modemmanager git isn't in the current release. Will it be > > slated for the next release, and if so is there a rough time > > estimate as to when that will be? > > > > If enough testing gets done with git master in the following weeks, we > can probably have a new stable 1.14 release at the beginning of June > or so. Please test with git master as much as you can! > Ok, thanks a lot. I will let everyone here know if I find anything wrong with master. _______________________________________________ ModemManager-devel mailing list ModemManager-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
