Hi Reinhard, A new development -- while on the 5G network with an active data connection (MM connected and ifup on the interface) I could get the real 5G values via the AT command, however the TLV was still missing from the verbose output of —dms-get-band-capabilities. Still, UL/DL performance was, disappointingly, still about what you would expect from one LTE band, but that is probably its own topic.
Here’s the AT command response: at+qeng=“servingcell” +QENG: “servingcell”, “NOCONN” +QENG: “LTE”,”FDD”,505,01,8C62D06,182,9410,28,5,5,7025,-78,-7,-51,15,- +QENG:”NR5G-NSA”,505,01,839,-83,154,-12 at+qeng=“servingcell” +QENG: “servingcell”, “NOCONN” +QENG: “LTE”,”FDD”,505,01,8C62D06,182,9410,28,5,5,7025,-81,-8,-53,14,- +QENG:”NR5G-NSA”,505,01,839,-93,60,-12 Best, Nick > On 10 Jun 2020, at 3:12 am, Reinhard Speyerer <rs...@arcor.de> wrote: > > On Tue, Jun 09, 2020 at 08:50:10AM +1000, Nick wrote: >> Hi Walter, >> >> I???m seeing a similar issue with my RM500Q-GL. Can you please post the >> output of: qmicli -p -d /dev/cdc-wdm0 --dms-get-band-capabilities >> >> Mine below for your reference. You would note on mine, after the Extended >> LTE bands, where we would expect to see the 5GNR band TLV response, that it >> is absent. (Thanks to Sebastian for showing me that.) However, I am >> currently not attached to a 5G network, nevertheless, when I attempted this >> test while attached to a 5G network, I had the same result. >> >> >> Best, >> Nick >> >> >> When I was on 5G >> --------------- >> AT+QENG="Servingcell" >> +QENG: "servingcell","NOCONN??? >> +QENG: "LTE","FDD",505,01,8B45502,349,1300,3,5,5,700B,-83,-10,-53,20,0,-150,- >> +QENG: ???NR5G-NSA???,505,01,45,-32768,-32768,-32768 (note the negative >> values for signal, equivalent to 0b1000000000000000) >> -------------- >> Responses for AT+QENG 5GNR: Access Tech, MCC, MNC, PCID, RSRP, SINR, RSRQ >> > > Hi Nick, > > same over here when using a test network in 5G NSA mode: > > at+qeng="servingcell" > +QENG: "servingcell","NOCONN" > +QENG: "LTE","FDD",1,01,1A2D001,1,300,1,3,3,1,-87,-3,-67,23,255,-32768,52 > +QENG:"NR5G-NSA",1,01,500,-32768,-32768,-32768 > > OK > > NASGetSignalInfo output for 5G NSA (from another test, still with the RG500Q): > +OK NASGetSignalInfo 02040000000000140600bffaa8ffb600170400008000801802000080 > > My assumption is that RSRP, SINR and RSRQ above would only be defined for > 5G SA mode as can be seen from the qmicli -v --nas-get-signal-info output here > https://gitlab.freedesktop.org/mobile-broadband/libqmi/-/issues/32 . > > I tried to stay out of the "guessing 5G QMI TLVs" business but since we > may never see a GobiAPI 2020 update here it goes anyway: > TLV 0x17 = RSRP and SINR (scaled by 10 like for LTE(?)), TLV 0x18 = RSRQ. > > A TLV that looks a little bit easier to guess due to its unusual size: > NASGetSystemInfo TLV 0x50 = 5GS TAC from TS 24.501 section 9.11.3.8. > > Regards, > Reinhard _______________________________________________ ModemManager-devel mailing list ModemManager-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
