Dear all, I need to set up the default LTE bearer settings: APN, type of APN, authentication parameters, in the Cinterion plugin.
And for this, I am going to add the two methods: void (* set_initial_eps_bearer_settings) (MMIfaceModem3gpp *self, .. gboolean (* set_initial_eps_bearer_settings_finish) (MMIfaceModem3gpp *self, .. Is this the right way to do it? I see that nobody implemented it so far. Is this called for mbim or qmi? I will have to run the following sequence: - go in AT+CFUN=4 (airplane mode with SIM connected). This is necessary because the CID might be locked or not taken into account immediately (in case there is an attach attempt ongoing). - set AT+CGDCONT for the right CID (normally 1) - set AT^SGAUTH for the same CID - go back to AT+CFUN=1. Is this ok to you? Instead of CFUN=4/1 also COPS=2/0 could be used, but I prefer the former. Regards, Giacinto _______________________________________________ ModemManager-devel mailing list ModemManager-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel