Hey Alex I am trying a new modem on my system and some weird things are happening. Trying to get the gps to come up but its not being shown as available but the mm debug shows there is a port there. Wondering how I can debug this to get it enabled ?
ModemManager[248]: <debug> [000000040.585164] [plugin manager) task 0,ttyUSB1:
started
ModemManager[248]: <debug> [000000040.586050] [plugin manager] task 0,ttyUSB1:
checking with plugin 'Sierra'
ModemManager[248]: <debug> [000000040.587130] (Sierra) [ttyUSB1] probe
required: 'at, qcdm'
ModemManager[248]: <debug> [000000040.588107] (tty/ttyUSB1) GPS port detected
ModemManager[248]: <debug> [000000040.588928] (tty/ttyUSB1) port is not
AT-capable
ModemManager[248]: <debug> [000000040.589703] (tty/ttyUSB1) port is not
QCDM-capable
ModemManager[248]: <debug> [000000040.590784] (tty/ttyUSB1) port probing
finished: no more probings needed
ModemManager[248]: <debug> [000000042.746064] AT port 'tty/ttyUSB2' flagged as
primary
ModemManager[248]: <debug> [000000042.746492] (ttyUSB2) type 'at' claimed by
/sys/devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.2
ModemManager[248]: <debug> [000000042.747188] (ttyUSB1) type 'gps' claimed by
/sys/devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.2
ModemManager[248]: <debug> [000000042.747802] (ttyUSB0) type 'qcdm' claimed by
/sys/devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.2
ModemManager[248]: <debug> [000000042.748239]
(/sys/devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.2)
tty/ttyUSB2 at (primary)
ModemManager[248]: <debug> [000000042.748544]
(/sys/devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.2)
tty/ttyUSB2 data (primary)
ModemManager[248]: <debug> [000000042.748879]
(/sys/devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.2)
tty/ttyUSB0 qcdm
ModemManager[248]: <debug> [000000042.749150]
(/sys/devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.2)
tty/ttyUSB1 gps (nmea)
# mmcli -m 0
--------------------------------
General | dbus path: /org/freedesktop/ModemManager1/Modem/0
| device id: 386fa1053746e4f1364aeecc41fa83d11a968985
--------------------------------
Hardware | manufacturer: Sierra Wireless, Incorporated
| model: MC7430
| firmware revision: SWI9X30C_02.24.05.06 r7040 CARMD-EV-FRMWR2
2017/05/19 06:23:09
| supported: gsm-umts, lte
| current: gsm-umts, lte
| equipment id: XXXXXXXXX
--------------------------------
System | device:
/sys/devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.2
| drivers: qcserial, qmi_wwan
| plugin: Sierra
| primary port: ttyUSB2
| ports: wwan1 (unknown), ttyUSB0 (qcdm), ttyUSB2
(at),
| wwan0 (unknown), ttyUSB1 (gps)
--------------------------------
Numbers | own: +XXXXXX
--------------------------------
Status | unlock retries: sim-pin (3), sim-puk (10)
| state: enabled
| power state: on
| signal quality: 0% (cached)
--------------------------------
Modes | supported: allowed: 2g, 3g, 4g; preferred: none
| current: allowed: 2g, 3g, 4g; preferred: none
--------------------------------
IP | supported: ipv4, ipv6, ipv4v6
--------------------------------
3GPP | imei: XXXXXXXX
| registration: idle
--------------------------------
3GPP EPS | ue mode of operation: csps-2
--------------------------------
SIM | dbus path: /org/freedesktop/ModemManager1/SIM/0
# mmcli -m 0 --location-status
------------------------
Location | capabilities: 3gpp-lac-ci
| enabled: 3gpp-lac-ci
| signals: no
Any pointers on how to change the gps port to be used correctly ?
Thanks
Marc
MC7430.log
Description: MC7430.log
_______________________________________________ ModemManager-devel mailing list ModemManager-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
