Hi Federico,
On Sat, Feb 27, 2021 at 6:16 PM Federico Murciano <federico.murci...@dai-labor.de> wrote: > > > Hardware: > Quectel > RG500QEA_VH > firmware revision: RG500QEAAAR11A03M4G according to the brochure it might support VoLTE. I think the normal profile for t-mobile uses CID #2 for the combined attach (and not CID #1). Try to set this CID #2 empty or also with internet.telekom, and then it might work. Otherwise I have no other ideas :( > > System: > device: /sys/devices/pci0000:00/0000:00:14.0/usb2/2-2 > drivers: qmi_wwan, option > plugin: quectel > primary port: cdc-wdm0 > ports: cdc-wdm0 (qmi), ttyUSB0 (qcdm), ttyUSB1 (gps), wwan0 (net) > > The result to lsusb -t is: > > edge2@dai-edge2:~$ lsusb -t > /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 10000M > /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M > /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/10p, 5000M > |__ Port 2: Dev 6, If 0, Class=Vendor Specific Class, Driver=option, 5000M > |__ Port 2: Dev 6, If 1, Class=Vendor Specific Class, Driver=option, 5000M > |__ Port 2: Dev 6, If 2, Class=Vendor Specific Class, Driver=option, 5000M > |__ Port 2: Dev 6, If 3, Class=Vendor Specific Class, Driver=option, 5000M > |__ Port 2: Dev 6, If 4, Class=Vendor Specific Class, Driver=qmi_wwan, > 5000M > /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/16p, 480M the drivers seem all ok, the device is mapped correctly. Regards, Giacinto _______________________________________________ ModemManager-devel mailing list ModemManager-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel