Hi Bjørn, Il giorno lun 26 apr 2021 alle ore 18:23 Bjørn Mork <bj...@mork.no> ha scritto: > > Bjørn Mork <bj...@mork.no> writes: > > > Sorry, i do not think these issues are related to ModemManager at all. > > This is a test from freshly booted modem, MM not running: > > root@finn:~# qmicli -p -d /dev/cdc-wdm0 --device-open-sync > --wda-set-data-format=ep-type=hsusb,ep-iface-number=4,link-layer-protocol=raw-ip,ul-protocol=qmapv5,dl-protocol=qmapv5,dl-max-datagrams=32,dl-datagram-max-size=31744 > [/dev/cdc-wdm0] Successfully set data format > QoS flow header: no > Link layer protocol: 'raw-ip' > Uplink data aggregation protocol: 'qmapv5' > Downlink data aggregation protocol: 'qmapv5' > NDP signature: '0' > Downlink data aggregation max datagrams: '32' > Downlink data aggregation max size: '31744' > root@finn:~# qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid > --wds-bind-mux-data-port=mux-id=1,ep-type=hsusb,ep-iface-number=4 > [/dev/cdc-wdm0] Client ID not released: > Service: 'wds' > CID: '15' > root@finn:~# qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid > --client-cid=15 --wds-set-ip-family=4 > [/dev/cdc-wdm0] Client ID not released: > Service: 'wds' > CID: '15' > root@finn:~# qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid > --client-cid=15 --wds-start-network=apn=telenor.smart,ip-type=4 > [/dev/cdc-wdm0] Network started > Packet data handle: '3891631616' > [/dev/cdc-wdm0] Client ID not released: > Service: 'wds' > CID: '15' > root@finn:~# qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid > --wds-bind-mux-data-port=mux-id=1,ep-type=hsusb,ep-iface-number=4 > [/dev/cdc-wdm0] Client ID not released: > Service: 'wds' > CID: '16' > root@finn:~# qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid > --client-cid=16 --wds-set-ip-family=6 > [/dev/cdc-wdm0] Client ID not released: > Service: 'wds' > CID: '16' > root@finn:~# qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid > --client-cid=16 --wds-start-network=apn=telenor.smart,ip-type=6 > [/dev/cdc-wdm0] Network started > Packet data handle: '3891309184' > [/dev/cdc-wdm0] Client ID not released: > Service: 'wds' > CID: '16' > root@finn:~# qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid > --wds-bind-mux-data-port=mux-id=2,ep-type=hsusb,ep-iface-number=4 > [/dev/cdc-wdm0] Client ID not released: > Service: 'wds' > CID: '17' > root@finn:~# qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid > --client-cid=17 --wds-set-ip-family=4 > [/dev/cdc-wdm0] Client ID not released: > Service: 'wds' > CID: '17' > root@finn:~# qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid > --client-cid=17 --wds-start-network=apn=telenor,ip-type=4 > error: couldn't start network: QMI protocol error (14): 'CallFailed' > call end reason (1): generic-unspecified > verbose call end reason (2,236): [internal] call-already-present > [/dev/cdc-wdm0] Client ID not released: > Service: 'wds' > CID: '17'
I guess the modem you are using is based on SDX55. Testing with a modem based on the same chipset, I can replicate your issue with just two ipv4 connections: $ sudo ./src/qmicli/qmicli -p -d /dev/cdc-wdm0 --device-open-sync --wda-set-data-format=ep-type=hsusb,ep-iface-number=2,link-layer-protocol=raw-ip,ul-protocol=qmapv5,dl-protocol=qmapv5,dl-max-datagrams=32,dl-datagram-max-size=31744 [/dev/cdc-wdm0] Successfully set data format QoS flow header: no Link layer protocol: 'raw-ip' Uplink data aggregation protocol: 'qmapv5' Downlink data aggregation protocol: 'qmapv5' NDP signature: '0' Downlink data aggregation max datagrams: '32' Downlink data aggregation max size: '16384' $ sudo ./src/qmicli/qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid --wds-bind-mux-data-port=mux-id=1,ep-type=hsusb,ep-iface-number=2 [/dev/cdc-wdm0] Client ID not released: Service: 'wds' CID: '17' $ sudo ./src/qmicli/qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid --client-cid=17 --wds-set-ip-family=4 [/dev/cdc-wdm0] Client ID not released: Service: 'wds' CID: '17' $ sudo ./src/qmicli/qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid --client-cid=17 --wds-start-network=apn=ibox.tim.it,ip-type=4 [/dev/cdc-wdm0] Network started Packet data handle: '4120009568' [/dev/cdc-wdm0] Client ID not released: Service: 'wds' CID: '17' $ sudo ./src/qmicli/qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid --wds-bind-mux-data-port=mux-id=2,ep-type=hsusb,ep-iface-number=2 [/dev/cdc-wdm0] Client ID not released: Service: 'wds' CID: '18' $ sudo ./src/qmicli/qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid --client-cid=18 --wds-set-ip-family=4 [/dev/cdc-wdm0] Client ID not released: Service: 'wds' CID: '18' $ sudo ./src/qmicli/qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid --client-cid=18 --wds-start-network=apn=wap.tim.it,ip-type=4 error: couldn't start network: QMI protocol error (14): 'CallFailed' call end reason (1): generic-unspecified verbose call end reason (2,236): [internal] call-already-present [/dev/cdc-wdm0] Client ID not released: Service: 'wds' CID: '18' but if I create two profiles: $ sudo ./src/qmicli/qmicli -p -d /dev/cdc-wdm0 --wds-create-profile=3gpp,apn=ibox.tim.it,pdp-type=IP New profile created: Profile type: '3gpp' Profile index: '2' $ sudo ./src/qmicli/qmicli -p -d /dev/cdc-wdm0 --wds-create-profile=3gpp,apn=wap.tim.it,pdp-type=IP New profile created: Profile type: '3gpp' Profile index: '3' and make the connection using profiles: $ sudo ./src/qmicli/qmicli -p -d /dev/cdc-wdm0 --device-open-sync --wda-set-data-format=ep-type=hsusb,ep-iface-number=2,link-layer-protocol=raw-ip,ul-protocol=qmapv5,dl-protocol=qmapv5,dl-max-datagrams=32,dl-datagram-max-size=31744 [/dev/cdc-wdm0] Successfully set data format QoS flow header: no Link layer protocol: 'raw-ip' Uplink data aggregation protocol: 'qmapv5' Downlink data aggregation protocol: 'qmapv5' NDP signature: '0' Downlink data aggregation max datagrams: '32' Downlink data aggregation max size: '16384' $ sudo ./src/qmicli/qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid --wds-bind-mux-data-port=mux-id=1,ep-type=hsusb,ep-iface-number=2 [/dev/cdc-wdm0] Client ID not released: Service: 'wds' CID: '17' $ sudo ./src/qmicli/qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid --client-cid=17 --wds-set-ip-family=4 [/dev/cdc-wdm0] Client ID not released: Service: 'wds' CID: '17' $ sudo ./src/qmicli/qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid --client-cid=17 --wds-start-network=3gpp-profile=2 [/dev/cdc-wdm0] Network started Packet data handle: '999450704' [/dev/cdc-wdm0] Client ID not released: Service: 'wds' CID: '17' $ sudo ./src/qmicli/qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid --wds-bind-mux-data-port=mux-id=2,ep-type=hsusb,ep-iface-number=2 [/dev/cdc-wdm0] Client ID not released: Service: 'wds' CID: '18' $ sudo ./src/qmicli/qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid --client-cid=18 --wds-set-ip-family=4 [/dev/cdc-wdm0] Client ID not released: Service: 'wds' CID: '18' $ sudo ./src/qmicli/qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid --client-cid=18 --wds-start-network=3gpp-profile=3 [/dev/cdc-wdm0] Network started Packet data handle: '1012176704' [/dev/cdc-wdm0] Client ID not released: Service: 'wds' CID: '18' things work! So maybe you'll have better luck using profiles. Regards, Daniele > root@finn:~# qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid > --client-cid=17 --wds-start-network=apn=internet.public,ip-type=4 > error: couldn't start network: QMI protocol error (14): 'CallFailed' > call end reason (1): generic-unspecified > verbose call end reason (2,236): [internal] call-already-present > [/dev/cdc-wdm0] Client ID not released: > Service: 'wds' > CID: '17' > root@finn:~# qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid > --client-cid=17 > --wds-bind-mux-data-port=mux-id=2,ep-type=hsusb,ep-iface-number=4 > [/dev/cdc-wdm0] Client ID not released: > Service: 'wds' > CID: '17' > root@finn:~# qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid > --client-cid=17 --wds-start-network=apn=internet.public,ip-type=4 > error: couldn't start network: QMI protocol error (14): 'CallFailed' > call end reason (1): generic-unspecified > verbose call end reason (2,236): [internal] call-already-present > [/dev/cdc-wdm0] Client ID not released: > Service: 'wds' > CID: '17' > root@finn:~# qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid > --client-cid=17 --wds-set-ip-family=6 > [/dev/cdc-wdm0] Client ID not released: > Service: 'wds' > CID: '17' > root@finn:~# qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid > --client-cid=17 --wds-start-network=apn=tdt2.telenor.smart,ip-type=6 > [/dev/cdc-wdm0] Network started > Packet data handle: '3891374016' > [/dev/cdc-wdm0] Client ID not released: > Service: 'wds' > CID: '17' > > > > I don't think there is much MM can do here. This modem firmware does > not work properly with QMAP muxing. Sorry about the confusion I've > caused by assuming this would work. > > Unless I am missing something in the sequence above? > > I'll switch the firmware to MBIM and see how that goes. I hear it's the > future anyway :-) > > > Bjørn > _______________________________________________ > ModemManager-devel mailing list > ModemManager-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel _______________________________________________ ModemManager-devel mailing list ModemManager-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel